Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Brentwood: What It Costs and How Long It Takes
Walk-In Showers & Shower Remodeling in Brentwood runs $9,000 – $28,000 for a full bathroom scope and $4,500 – $12,000 for a walk-in shower installed on its own, with most projects finished in two to four weeks of active work. The job covers demolition, waterproofing, a new pan and drain, tile or slab walls, glass, and fixtures. Call (888) 419-3650 and we’ll walk your actual shower and give you a written line-item number before anything gets ordered.

How a Brentwood shower remodel actually runs, stage by stage
Most contractors describe this job in one sentence and disappear. Here’s the real sequence, including what you’ll be deciding and when.
Stage 1: Measure, moisture check, and scope lock (day 1)
We pull dimensions, check for soft subfloor around the drain, and confirm wall framing is sound behind the old tile or fiberglass. If there’s any sign of past leakage into the framing, that changes the scope before a single tile comes off. You approve the final layout and fixture list here. This is the day to decide niche placement and whether a bench or curbless entry is in.
Stage 2: Demolition and rough-in (days 2 – 4)
Out comes the old pan, tile, and backer. If we’re moving the drain or the valve, the rough plumbing happens now, along with any blocking for grab bars or a bench. If permits are required, this is the inspection window. Expect dust protection on doorways and a daily cleanup, not a week-long mess.
Stage 3: Waterproofing and the pan (days 5 – 6)
This is the stage that decides whether the shower lasts twenty years or five. We build a sloped mortar bed or a bonded waterproofing membrane system, then flood-test it. You won’t see this work behind the tile, so ask for photos. We take them.
Stage 4: Tile, stone, and glass template (days 7 – 12)
Wall tile and floor tile go in, then grout and seal. Glass gets templated once the tile is set, because a frameless panel cut to a rough opening will not fit a finished one. Templating adds a few days of lead time for fabrication.
Stage 5: Fixtures, glass install, and walkthrough (days 13 – 18)
Showerhead, valve trim, drain cover, door and panel get installed, then we run water and check for any weep or pitch issue. Final walkthrough is with you, not a punch list left on the counter. Most Brentwood jobs land in this two-to-three-week band once materials are on site; special-order glass or imported tile can stretch it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that shape your shower: tile, pan, glass, and fixtures
The bones of a walk-in shower are the same everywhere. What you pick on top is where budgets and longevity diverge.
- Wall material – porcelain vs. natural stone. Porcelain is the practical pick for Brentwood’s hard water and cleans up with a squeegee. Marble and travertine look extraordinary and cost 30 – 50% more in material alone, plus they need sealing and are less forgiving of a missed wipe-down.
- Pan – tiled mud bed vs. prefab acrylic. A tiled pan with a linear drain is the premium look and the better long-term seal when built right. Prefab acrylic is faster and cheaper but reads builder-grade and can flex over time.
- Glass – framed vs. frameless. Frameless is the modern standard and requires precise templating. Framed enclosures cost less and tolerate a slightly out-of-square opening, which matters in homes where the framing has moved.
- Entry – curb vs. curbless. A curbless entry means recessing the floor structure for the drain slope. Worth it for aging-in-place or a clean line; it adds framing work and cost.
- Fixtures – standard vs. thermostatic and rain systems. A basic pressure-balance valve is fine. A thermostatic valve with a rain head and hand shower needs a larger rough-in and more wall work but is a genuine daily upgrade.
- Ventilation. A properly sized exhaust fan is a functional requirement in a Brentwood shower, not an accessory. Skip it and you’ll be resealing grout within a few years.
What Walk-In Showers & Shower Remodeling costs in Brentwood, CA
Expect $9,000 – $28,000 for a full walk-in shower remodel in Brentwood, or $4,500 – $12,000 if you’re replacing the shower within the existing footprint. Five things push a job toward one end or the other:

- Footprint and layout. A standard 36-by-60 alcove is the low end. A large walk-in with a bench, niche, and linear drain adds square footage, framing, and labor.
- Condition behind the wall. Rotted subfloor, failed framing, or an old drain assembly that needs replacement pushes cost up before finish work even starts.
- Relocating plumbing or electrical. Moving the drain, valve, or adding a light or fan circuit means rough-in trades and typically a permit.
- Material grade. Porcelain and a prefab base sit at the bottom; large-format stone, frameless glass, and specialty drains sit at the top.
- Permit and inspection scope. A like-for-like replacement may not need one; anything that alters plumbing or structure does.
A written estimate from us itemizes demolition, waterproofing, tile, glass, fixtures, and permit costs as separate lines. It does not include structural repair discovered mid-demo, specialty stone beyond the selected allowance, or upgraded fixture packages added after sign-off. Those are quoted before work continues, never billed as a surprise.
See the difference
Before
After
Before
After
Before
AfterWhat Brentwood homes specifically do to a shower remodel
Most of the homes we open up here were built between the 1990s and the 2020s, and that era tells you what to expect behind the tile. Builder-grade fiberglass inserts were standard, and they hide a lot: a thin backer, minimal waterproofing, and a pan that was never sloped correctly. In the newer tracts off Sand Creek Road and along the Deer Ridge and Shadow Lakes areas, we regularly find showers that started weeping at the drain within the first decade. On the custom ranchettes out toward the orchard-adjacent lots, you’re more likely to find larger footprints and heavier stone, which changes the demo and waterproofing plan. Hot inland summers over 100°F and persistent Delta winds are hard on exterior stucco and on bathroom ventilation, so we’re particular about exhaust sizing in Brentwood. If you’re already planning a wider scope, this often becomes part of a full Bathroom Remodeling in Brentwood, which is the smarter path when the vanity and flooring are on their way out too.
Serving Brentwood, CA – Our Local Coverage Area
We serve Brentwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Walk-In Showers & Shower Remodeling in Brentwood
A walk-in shower remodel in Brentwood typically takes two to four weeks of active work from demo to final walkthrough, plus glass fabrication lead time. Larger scopes with a bench, linear drain, and specialty tile run toward the longer end. Call (888) 419-3650 for a schedule tailored to your shower.
A like-for-like shower replacement under the same footprint usually does not require a permit, but anything that moves the drain, alters plumbing, or changes structure does. We confirm the requirement for your specific address before work begins and pull what’s needed. Call (888) 419-3650 to talk through your project.
Yes. If your drain and valve are already positioned well, a walk-in shower can be built within the existing footprint with no plumbing relocation. This is the most cost-effective path and often the best fit for a standard alcove. Call (888) 419-3650 and we’ll walk you through the options.
Walk-in shower installation alone runs $4,500 – $12,000, and a full bathroom remodel including the shower runs $9,000 – $28,000. Material grade, layout size, and plumbing changes are the main variables. Call (888) 419-3650 for an exact quote – estimates are free.
Every walk-in shower we build is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If something isn’t right, we come back and make it right. Call (888) 419-3650 to start.
Get a free walk-in shower estimate in Brentwood
Call (888) 419-3650 for a free on-site estimate on Walk-In Showers & Shower Remodeling in Brentwood. We answer live, 24/7, and we’ll walk your shower, confirm whether a permit is needed for your address, and hand you a written line-item quote with fixed pricing and no change orders. You’re covered by our 730-Day Done Right Promise, and we serve the whole Brentwood area. Reach out today.
Written by the team at Groundwork Construction Co.