Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Window Replacement in Brentwood, CA: What It Costs and How Long It Takes
Window replacement in Brentwood typically runs $4,500 – $15,000 for a whole-home project and takes one to three days on site once materials arrive, with most standard openings swapped in a single visit. You’re replacing failed dual-pane glass, warped vinyl frames, or builder-grade units that never sealed right in the first place. Call (888) 419-3650 and we’ll set a free on-site estimate; you’ll get a written, line-item quote before anything is ordered.

How Window Replacement Actually Runs, Start to Finish
Most contractors gloss over the sequence, so here it is in plain order. Five stages, and you’ll make a decision at nearly every one.
Stage 1: Measure and order (day 1, then 3 – 6 weeks of lead time)
We measure every opening, check square and level, and note whether the existing frame is sound enough to hold a replacement insert or whether it needs a full-frame tear-out. You decide the material, glass package, and grid pattern at this stage. Lead time is the part nobody warns you about: standard vinyl units land in three to five weeks, custom sizes and colors run six weeks or longer.
Stage 2: Prep and protection (a few hours)
Furniture moves back from the walls, floors get drop cloths, and we mask trim. Each opening is measured one more time against the delivered unit before the old one comes out, because a half-inch miss on a stucco wall is an expensive mistake.
Stage 3: Removal and rough-opening inspection (same day)
The old sash and frame come out, and we inspect what’s behind them: rotted framing, water staining, missing flashing, or gaps in the sheathing. Brentwood stucco homes from the 1990s and 2000s regularly show cracked sealant at the sill, which is where most of the leaks start. Anything compromised gets repaired before a new window goes in.
Stage 4: Installation and sealing (bulk of the job)
New units seat into the opening, get shimmed plumb and level, insulated, and sealed with backer rod and exterior sealant. Stucco patching and trim work happen the same day. We test every sash for smooth operation before moving to the next opening.
Stage 5: Final walkthrough and cleanup (end of job)
You walk every window with us, operate each one, and confirm the finish work. Debris goes with us. The written workmanship guarantee, our 730-Day Done Right Promise, covers the installation itself, and if something isn’t right we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Window replacement is mostly a materials decision, and the honest trade-offs matter more than the marketing.
- Vinyl frames: The most common choice in Brentwood’s production homes. Lowest cost, low maintenance, good thermal performance. Downsides are limited color options and less rigidity in very large openings.
- Fiberglass frames: Stronger than vinyl, holds up better to the inland heat swings, and expands and contracts less. Costs more, and the finish options are narrower.
- Wood-clad (aluminum outside, wood inside): The upgrade pick for custom ranchettes and anyone who wants real wood on the interior. Andersen and Marvin make the units we specify most. Higher cost, and the exterior cladding has to be maintained.
- Glass packages: Dual-pane is the baseline. Low-E coatings and argon fill cut heat gain, which matters when your west-facing windows sit in 100°F summer sun. Tempered glass is required in some locations near doors and low sills.
- Insert vs. full-frame: Inserts fit inside the existing frame and cost less. Full-frame replacement means new framing and trim, which is the right call when the original frame is rotted or you’re changing window size.
Homeowners often pair this with Vinyl Fence in Brentwood when they’re already having exterior work done and want the whole yard and facade tightened up at once.
What Window Replacement Costs in Brentwood, CA
Whole-home window replacement in Brentwood runs $4,500 – $15,000. That’s a wide spread, and here’s what moves it.

- Number and size of openings: A six-window front-of-house job sits near the bottom; twelve or more units, or oversized picture windows, push toward the top.
- Material grade: Vinyl inserts are the budget path; fiberglass and wood-clad run meaningfully higher per unit.
- Existing condition: Rotted framing, failed flashing, or stucco damage found during removal adds repair cost. We flag it in the quote, not after the fact.
- Glass package: Low-E and argon upgrades add per-window cost but cut cooling bills in Brentwood’s hot summers.
- Permit scope: Like-for-like replacements usually don’t require a permit; changing window size or doing full-frame work typically does, and that’s a line item in the estimate.
Our estimates are written line by line, with no-hassle upfront pricing: the number you see is the number you pay. Projects over $10,000 qualify for $1,000 off, and 0% financing for 18 months is available. If this is part of a larger Windows & Doors in Brentwood project, we’ll scope both together so the pricing lines up.
See the difference
Before
After
Before
After
Before
AfterWhat Brentwood Homes Specifically Do to This Job
Brentwood’s housing stock is overwhelmingly new, and that changes what window replacement looks like here. The 1990s – 2020s Mediterranean and Spanish-style stucco tracts that dominate ZIP 94513 are now hitting the age where builder-grade dual-pane units fail: fogged glass, broken seals, and frames that have cooked in the inland heat for twenty years. Summer highs over 100°F and constant Delta winds accelerate stucco cracking around openings, which is where we find most water intrusion. The custom ranchettes on the edge of town bring a different problem: large openings and non-standard sizes that need custom units and longer lead times.
On the permitting side, like-for-like replacement generally doesn’t trigger a permit, but full-frame work or size changes do, and we pull it and pass the inspection. Homeowners in Brentwood’s newer tracts should check their HOA rules on visible exterior color and grid patterns before ordering, because a missed approval means re-ordering units. If you’re also fencing the property line, Aluminum Fence in Brentwood is a common companion job while crews are already on site.
Serving Brentwood, CA – Our Local Coverage Area
We serve Brentwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Window Replacement in Brentwood
Most whole-home jobs are done in one to three days on site, with three to six weeks of lead time on materials beforehand. Custom sizes and colors add to that. Call (888) 419-3650 for a schedule estimate once we’ve measured.
Like-for-like replacements of the same size usually don’t require a permit; changing the size of an opening or doing full-frame work typically does. We pull the permit when it’s required and pass inspection as part of the job.
Whole-home replacement runs $4,500 – $15,000 depending on count, material, glass package, and existing condition. Call (888) 419-3650 for an exact quote; the estimate is free and written line by line.
Yes. Most replacements use the existing framing and don’t touch the structure. If we find rotted framing during removal, we repair it and show you what we found before adding cost.
Installation is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. Manufacturer warranties on the units themselves vary by brand. Call (888) 419-3650 to walk through the coverage on your specific job.
Get a Free Window Replacement Estimate in Brentwood
Window replacement in Brentwood starts with a free on-site estimate. Call (888) 419-3650 and a live person picks up, day or night. We measure your openings, walk you through material and glass options, and hand you a written line-item quote with no-hassle upfront pricing. Our technicians arrive background-checked and in uniform, and our windows & doors service covers Brentwood and the surrounding area. Estimates are free, and the number you see is the number you pay.
Written by the team at Groundwork Construction Co.