Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in Clayton, CA: What It Costs and How Long It Takes
A new wood fence in Clayton, CA typically runs $3,500 to $9,000, and most residential lots are finished in two to four days once materials land on site. That range covers removal of the old fence, new posts set in concrete, and a painted or stained finish on a standard-height privacy run. Steep hillside lots and gate integrations push toward the top. Call (888) 419-3650 for a free on-site estimate with a written line-item quote.

How we build a wood fence in Clayton, step by step
Fence work on these lots is a sequence, not a single visit. Skipping a stage is how fences lean within two seasons, and on a sloped property the failure shows up fast.
Stage 1 – Site walk and layout (day 1, about 2 hours). We plot the line, check property corners against your plat or survey, and flag anything the fence will cross: irrigation lines, buried electrical, a French drain, a retaining wall. On a hillside lot we measure the grade change across the run, because a fence on a 15% slope needs stepped panels or racked rails, and that decision changes the material count. You decide the fence line and confirm the height you want.
Stage 2 – Tear-out and post setting (day 1 into day 2). We pull the old fence and posts, disposing of the debris. Then we dig fresh holes, typically 24 inches deep and set in concrete, spaced on 8-foot centers. On expansive clay, post depth and concrete footing matter more than on flat ground – shallow posts work their way loose as the soil swells and shrinks. Holes set on day 1 cure overnight before the panels go up. You don’t have to make any decisions here; this is the labor.
Stage 3 – Framing and paneling (day 2 into day 3). Rails go on, then the pickets or boards. This is the stage where you choose board style, gap, and cap rail, and where we confirm the finished side faces out or in. A 150-foot run of dog-ear privacy fencing runs a full day for two people.
Stage 4 – Gate and hardware (day 3). Gate posts get extra concrete and a heavier post – the gate is the part of a wood fence that fails first. We hang the gate, set the latch, and check the swing clearance.
Stage 5 – Finish coat and walk-through (day 3 or 4). We stain or seal the wood and walk the line with you. Stain protects against Clayton’s dry summer sun and the seasonal wet, and pushes the fence’s usable life out several years. You sign off on the finished run, and the 730-Day Done Right Promise covers the workmanship from there.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The wood fence options you’ll be choosing between
Most of the decisions on a Clayton wood fence come down to species, board style, and height. Here’s what actually changes the price and how each holds up.
- Western red cedar – the premium pick. Naturally rot-resistant, holds stain well, and the color warms a hillside lot. Costs more per linear foot than pine, and worth it if you want the fence to still look good in ten years.
- Pressure-treated pine – the workhorse. Cheaper, strong, and common on mid-century ranch homes in the flat core. It needs re-sealing every couple of years and will gray out if you don’t.
- Board-on-board vs. dog-ear privacy – board-on-board gives full privacy with an overlapping picket, while dog-ear leaves a small gap and costs less. Pick based on whether you want zero sightlines or a lower price.
- Height and style – 6-foot is the standard privacy height. 4-foot is common for front-yard or decorative runs. A cap rail and trim add a finished look and a modest cost bump.
- Gate integration – a wood gate with a heavier post and hardware runs more than a plain run, and this is where a smart-home gate opener or keypad entry gets wired in if you’re adding one.
- Cedar vs. composite look-alikes – composite fencing in a wood finish is available and lower-maintenance, but it costs more up front and doesn’t have the same feel. Worth pricing side by side.
What a wood fence costs in Clayton, CA
Expect $3,500 to $9,000 for a typical residential wood fence in Clayton. That spread is driven by five variables, so here’s how each one moves the number.

| Factor | Low end | High end |
|---|---|---|
| Linear footage | ~80 ft | 200+ ft |
| Species | Pressure-treated pine | Western red cedar |
| Old fence removal | Reuse post line | Full tear-out and haul-away |
| Grade / terrain | Flat lot | Steep hillside, stepped panels |
| Gate and hardware | No gate | Custom gate with opener or keypad |
| Finish | Seal coat | Two-coat stain |
Longer runs, cedar, steep terrain, and a custom gate push you toward the top. A short run on a flat lot with pressure-treated pine lands near the bottom. A written estimate from us includes the tear-out, concrete footings, posts, rails, pickets, the gate, and the finish coat, priced line by line with no change orders – the number you see is the number you pay. What it does not include unless we scope it in: engineering on a fence tied to a retaining wall, permit fees, or relocation of utilities if a buried line sits on the line. We’ll flag those before signing, not after. Call (888) 419-3650 for an exact quote – estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Clayton homes specifically do to this job
Clayton sits at the base of Mount Diablo, and the housing stock splits into two jobs. The flat core has mid-century ranch homes where a standard wood fence goes in clean. The hillside neighborhoods have 1980s through 2000s custom homes on steep lots with raised foundations, decks, and retaining walls, and a fence there has to work around all three. If the fence runs along a retaining wall or a deck edge, the post footings need to be engineered, and we bring that up at the estimate rather than mid-dig.
The wildland-urban interface rules are the other half of it. Clayton’s fire codes govern materials and defensible-space clearance, and hillside fences built before modern fire codes often use untreated wood with inadequate clearance to the structure. Replacing that fence is a chance to move to a fire-rated material or a treated wood section and pull the clearing back where the town requires it. Our technicians have up to 12 years of experience reading these lots, and we’ll tell you where the defensible-space line falls before we set a single post. This is part of a larger exterior scope for many homeowners, and it ties into Fence Installation in Clayton and the wider Fence Installation work we do. We cover Clayton and neighboring areas across ZIP 94517. If you’re redoing the front approach at the same time, homeowners often pair this with Paver Driveways in Clayton or Concrete Driveways & Concrete Work in Clayton.
Serving Clayton, CA – Our Local Coverage Area
We serve Clayton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Wood Fence in Clayton
Two to four days for a standard residential run, longer on steep lots or with a custom gate. Post setting takes a day with an overnight cure; framing and pickets take a day or two; the gate and finish coat close out the last day. Call (888) 419-3650 for a firm timeline on your lot.
Often yes for fences over the standard height or on a hillside lot with retaining structures, and the town reviews fence height and setback for hillside properties. We check the requirements before we build and pull what the job needs. Call (888) 419-3650 and we’ll confirm for your address.
Usually yes – we plot the line around existing utilities, and only reroute if a buried line sits directly on the fence path. On a hillside lot with a French drain along the property line, we may recommend adjusting the drain at the same time. Call (888) 419-3650 for a site walk.
Expect $3,500 to $9,000 depending on length, species, terrain, gate, and finish. A short flat-lot pine run sits near the bottom; a long cedar run on a slope with a custom gate sits near the top. Call (888) 419-3650 for an exact quote – estimates are free.
Every wood fence we build is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. That covers our workmanship for two full years, one of the longest workmanship guarantees in the residential construction space. Call (888) 419-3650 with any follow-up questions.
Get a free wood fence estimate in Clayton
We’ll walk your lot, measure the run, check the grade and defensible-space line, and hand you a written line-item estimate for your wood fence in Clayton – free, with no pressure. Calls are answered by a live person, 24/7. Call (888) 419-3650, and we’ll book a site visit around your schedule.
Written by the team at Groundwork Construction Co.