Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What a Wood Fence in Bay Point Actually Costs and How Long It Takes
A wood fence in Bay Point runs $3,500 – $9,000 for most residential lots, and a typical 150-linear-foot privacy fence is finished in two to four working days once materials are on site. The number moves with fence length, height, wood species, gate count, and how much old fencing and brush needs to come out first. Call (888) 419-3650 for a free on-site estimate with a written line-item quote before any crew shows up.

How We Build It, Start to Finish
Every wood fence follows the same five stages. Here’s what actually happens, so you know what to expect on each day and where you’ll be making decisions.
Stage 1: Walkthrough and Layout (about an hour)
We walk the property line with you, confirm where the fence goes, and flag anything in the way: mature trees, irrigation lines, a shed slab, or utility easements. You decide the fence line and the gate positions. If your lot borders a neighbor, this is also when we talk through whose responsibility the shared section is. We don’t start digging until the layout is signed off.
Stage 2: Permits and Utility Locates (three to ten business days)
Because Bay Point is unincorporated, fencing permits go through Contra Costa County, not a city building department, and that changes the paperwork timeline. Utility locates are separate and take a few business days. We handle the county submittal and the 811 call, and we don’t schedule the crew until both clear. This is the stage homeowners underestimate most.
Stage 3: Demolition and Post Setting (day one to day two)
Old fence panels come down, posts get pulled or cut at grade, and any concrete footings get broken out. Then new posts go in: typically 4×4 pressure-treated set in concrete, spaced at eight feet. Posts have to cure before panels hang, so this is a genuine pause, not padding. Roughly six to eight hours a day of on-site work across both days for a standard lot.
Stage 4: Rails, Panels, and Gates (day two to day three)
Top and bottom rails go up, then pickets or dog-eared panels, then the gates. Gates are the slow part because they need to swing true and latch cleanly, and a badly hung gate is the first thing to sag. You’ll want to walk the gates with us before we finish. Most jobs are closing this stage out on day three.
Stage 5: Hardware, Sealing, and Final Walkthrough (half a day)
Galvanized or coated fasteners, hinges, latches, and a post-cap detail if you chose one. Then stain or sealer if that’s part of the scope, applied after the wood has some time to settle. Final walkthrough covers line, gate swing, and cleanup. Everything we install is covered by our 730-Day Done Right Promise; if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Wood Fence Choices You’ll Actually Make
You’re picking between a handful of real options, and each one trades cost against lifespan or appearance. Here’s the honest version:
- Cedar vs. pressure-treated pine. Cedar costs more up front but resists rot and insects naturally and takes stain better. Pressure-treated pine is the budget pick and holds up fine when maintained, but it wants sealing every couple of years. For a delta-exposed lot, cedar earns its premium.
- Six-foot privacy vs. four-foot picket. Six foot is the standard request for privacy; four foot keeps sightlines open and often satisfies front-yard setback rules. Height drives material cost and wind load.
- Dog-eared panels vs. board-on-board. Dog-eared panels are cheaper and faster. Board-on-board overlaps pickets for a full privacy seal with no gaps; it’s the better call where neighbors are close.
- Set-in-concrete posts vs. gravel-set. Concrete lasts longer and holds straighter; gravel drains faster but shifts more in soft soils. On Bay Point’s ground, concrete is the usual choice.
- Stain or sealer finish. Clear sealer preserves the natural look; a semi-transparent stain adds UV protection. Either way, plan on recoating every two to three years in this wind and sun exposure.
If your fencing is part of a full Fence Installation in Bay Point, we’ll price the whole scope together so you’re not paying mobilization twice.

What a Wood Fence Costs in Bay Point
Most wood fence jobs here land between $3,500 and $9,000. That range covers real jobs, not a teaser number. Here’s the line-item breakdown:
| Line item | Typical Bay Point range |
|---|---|
| Material and installation, standard 150 linear feet, pressure-treated | $3,500 – $5,500 |
| Upgrade to cedar or board-on-board | $1,200 – $2,500 added |
| Old fence demolition and haul-away | $400 – $900 |
| Gate (single, with hardware) | $350 – $700 each |
| Contra Costa County permit and inspection | varies; quoted in writing |
| Stain or sealer application | $300 – $700 |
What pushes a job to the low end: a clean, level lot, standard six-foot pine, no demolition, and a short run under 120 feet. What pushes it toward $9,000: a long run over 200 feet, cedar or board-on-board, multiple gates, sloped or soft ground requiring deeper footings, and old concrete footings that need breaking out. Your written estimate itemizes every one of these so the number you see is the number you pay. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat Bay Point’s Lots Specifically Do to This Job
Bay Point sits where the delta breezes meet the Diablo Range, and that wind exposure is not a background detail for fencing. Afternoon gusts push steadily against a six-foot panel, so posts go deeper and footings get sized for uplift, not just for holding a post upright in calm ground. We routinely see older fences on this side of the county leaning or shedding pickets after spring gusts, and the fix is almost always foundation work, not new boards. The soil matters too: soft bay-fill ground shifts, so a post that’s set shallow will move seasonally. Most of the housing here dates to the post-WWII and mid-century tract era, with newer infill on the remaining lots, so we’re often replacing decades-old fencing on established lots alongside new builds. Because Bay Point is unincorporated, all of this runs through Contra Costa County permits and inspections rather than a city hall, and we handle that submittal as part of the job. We cover the whole community through our Bay Point service area, from Bailey Road over toward Port Chicago Highway.
Serving Bay Point, CA – Our Local Coverage Area
We serve Bay Point and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Wood Fence in Bay Point
Most wood fence jobs take two to four working days on site, plus one to two weeks for the Contra Costa County permit and utility locates before that. A short 100-foot run with one gate can close in two days; a 250-foot perimeter with two gates and demolition runs closer to four.
Yes, in most cases. Because Bay Point is unincorporated, fencing permits go through Contra Costa County, and height limits and setback rules apply depending on whether the fence is in the front, side, or rear yard. We pull the permit and pass the inspection as part of the job, so you’re not chasing the county yourself.
Usually, yes. We walk the line first and hand-dig around irrigation runs and root zones where needed. If a sprinkler line sits directly on the fence line, we flag it before digging so you can decide whether to reroute it or shift the fence a few inches.
Wood fences here run $3,500 – $9,000 depending on length, height, wood species, gates, and demolition. Call (888) 419-3650 for an exact quote. Estimates are free and itemized in writing.
Every fence we build is covered by our 730-Day Done Right Promise: if the workmanship isn’t right, we come back and make it right. That covers posts, panels, gates, and hardware, not normal weathering or storm damage, which we’ll always tell you plainly upfront.
Get a Free Wood Fence Estimate in Bay Point
Call (888) 419-3650 and a live person answers, any hour, any day. We’ll set up a free on-site estimate, walk your fence line with you, and hand you a written, itemized quote before any work starts. If you’re also redoing the approach, homeowners often pair this with Paver Driveways in Bay Point or Concrete Driveways & Concrete Work in Bay Point. Prefer to see the wider scope first? Start with our Fence Installation service and we’ll build the whole plan from there.
Written by the team at Groundwork Construction Co.