Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in Alamo, CA: What It Costs and How Long It Takes
Asphalt Driveways & Resurfacing in Alamo typically runs $3,500 – $9,000 for a new asphalt drive and $250 – $700 for sealing, with most residential jobs finished in two to three days once the weather holds. The work is either a full-depth asphalt pour over a freshly graded base or a resurfacing pass over sound existing pavement, and the deciding factor is what’s underneath. Call (888) 419-3650 for a free on-site estimate before you commit to either.

How an Asphalt Driveway Job Actually Runs, Start to Finish
Alamo’s long private driveways almost never match a flat-lot subdivision job, so the sequence matters more here than the finish coat. Here’s the real order of operations on a typical 94507 driveway, with the decisions that land on you at each step.
- Day 1, morning: walk-through and layout. We measure the run, check slope and drainage direction, and probe the base to see whether it’s failing. On estate lots this is where we find the culvert or drainage swale that has to be addressed before any asphalt goes down. You decide the driveway width and whether turnouts are needed.
- Day 1, mid-day: demo and excavation. Failing asphalt gets torn out and hauled off. On a resurfacing job, we skip the tear-out but grind or clean the surface and fill cracks and depressions first. Depth of excavation depends on traffic and soil, and on Alamo’s clay-heavy hillside soils we often go deeper than a flat-lot job would call for.
- Day 1 – 2: base prep and compaction. Class 2 aggregate base gets graded and compacted in lifts. This is the stage that determines whether the driveway lasts ten years or cracks in three, and it’s the one most cheap bids cut short. You’ll see us on a plate compactor for a while here.
- Day 2: asphalt placement. Hot-mix asphalt goes down at the right temperature, rolled and compacted to spec. Edges get shaped. This is the biggest single day of the job and the one we schedule around weather – asphalt needs dry, moderate conditions.
- Day 3 and after: curing and finishing. The drive needs to cure before you park on it, typically 24 to 72 hours depending on temperature. Sealing is usually scheduled weeks later once the asphalt has fully cured, not the same week. You decide whether to bundle sealing now or plan it for the following season.
Total working time for most Alamo residential drives is two to three days on site, plus the cure window. Larger estate runs with drainage work take longer, and winter rain can push the schedule.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Change the Look and the Life of the Drive
Asphalt isn’t one product. What you pick at the estimate stage drives both the price and how the driveway holds up on a hillside lot.
- New asphalt over a rebuilt base: the full job. Tear out, new aggregate base, fresh hot-mix. Highest cost, longest life, and the right call when the existing pavement is failing or the base is shot.
- Resurfacing (overlay) over sound asphalt: cheaper and faster, but only works if the base is still solid and drainage is correct. We won’t overlay a driveway that’s already cracking from below – that’s money thrown away.
- Sealcoat: the maintenance pass. A good seal every few years protects against sun and water. On Alamo’s hot, dry summers, sealcoat earns its keep; on a fresh driveway, wait until it cures.
- Edge treatment and aprons: whether the driveway meets the road with a proper apron, and how the edges are retained. On sloped estate drives, edging and drainage swales are what keep water from undercutting the pavement.
- Material adjacent work: if you want a border or a matching walkway, hardscape pavers from Belgard or Techo-Bloc pair well with asphalt and hold up to the same heat. That’s a separate scope and a separate conversation.
The honest trade-off: a cheaper overlay saves money now but only lasts if the base is genuinely sound. When in doubt, we tell you which one you actually need, in writing.
What Asphalt Driveways & Resurfacing Costs in Alamo, CA
Asphalt Driveway Paving in Alamo runs $3,500 – $9,000, with Driveway Sealing at $250 – $700. Driveway Replacement, which covers tear-out and rebuilding the base, lands at $5,000 – $14,000. A few variables push a job toward the low or high end.
- Length and width: Alamo’s long private drives can run well past a standard two-car width, and every additional foot of length and width adds asphalt and base.
- Base condition: sound base means a resurfacing job; failing base means full replacement, which is the biggest cost swing.
- Access and slope: steep hillside drives and limited truck access slow the job and add labor.
- Drainage work: culverts, swales, and retaining that a flat lot wouldn’t need.
- Permit scope: if the work touches the county right-of-way at the road, permitting comes into play.
A written estimate should spell out the base prep, the asphalt thickness, hauling, and drainage line by line. What it typically doesn’t cover: landscape repair beyond the driveway footprint, and any utility relocation if we hit something unexpected. We quote those before we touch them, so the number you see is the number you pay. Call (888) 419-3650 for an exact quote – estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhy an Alamo Driveway Is a Different Job
Alamo is unincorporated, which changes the paperwork before it changes the pavement. There’s no city hall to walk into – construction runs through Contra Costa County’s building and fire departments and the Alamo Police/CCC Fire protection district, and hillside lots off roads like Stone Valley Road often trigger geotechnical and slope-stability review that a flat-lot project elsewhere would never see. That matters for driveways because drainage and slope are part of the review, not an afterthought.

The housing stock compounds it. Alamo’s custom ranch and Mediterranean estates on half-acre to several-acre parcels often sit at the end of long private drives, and older outbuildings and guest houses mean more pavement to maintain. We routinely see drives that failed not from bad asphalt but from water running under them – the clay-heavy hillside soils hold moisture in winter and bake hard in summer. Getting the drainage right is the difference between a driveway that lasts and one that cracks along the same seam every spring.
If you’re reworking the drive as part of a larger exterior project, it’s often part of a full Driveway & Pavers in Alamo scope, and homeowners sometimes pair a new drive with a detached structure, so we also handle a New Detached ADU in Alamo and a Junior ADU & Interior Conversion in Alamo when the project grows past the pavement. You can see the full picture on our Driveway & Pavers service page, and we cover all of Alamo and the surrounding valley. Every job is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right.
Serving Alamo, CA – Our Local Coverage Area
We serve Alamo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Asphalt Driveways & Resurfacing in Alamo
Most residential drives take two to three days on site, plus 24 to 72 hours of cure time before you park on them. Larger estate runs with drainage work or county review take longer, and winter rain can delay placement. Call (888) 419-3650 for a schedule specific to your property.
A straight resurfacing within your own property usually doesn’t require a permit, but any work touching the county right-of-way at the road, or on a hillside lot with slope concerns, can trigger Contra Costa County review. We confirm the permit scope before work starts and pull what’s needed. Call (888) 419-3650 to talk through your specific lot.
Only if the base is sound and the drainage is correct – an overlay over failing pavement cracks again within a year or two. We probe the base during the estimate and tell you honestly which one you need. Call (888) 419-3650 for a free on-site assessment.
New asphalt paving runs $3,500 – $9,000, full replacement with base rebuild is $5,000 – $14,000, and sealing is $250 – $700. Length, base condition, slope, drainage, and permit scope move the number. Call (888) 419-3650 for an exact quote – estimates are free.
All our projects are covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. That’s backed in writing, and it’s one of the longer workmanship guarantees in residential construction. Call (888) 419-3650 to ask what it covers for your job.
Get a Free Asphalt Driveway Estimate in Alamo
If your Alamo driveway is cracking, sinking, or just past its prime, the next step is a free on-site estimate. Call (888) 419-3650 and a live person will book it – we’ll walk the drive, probe the base, and hand you an upfront, line-item number in writing. No hassles, no change orders, no surprises. Estimates are free.
Written by the team at Groundwork Construction Co..