Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Alamo, CA: What It Costs and How It Gets Built
Chain link fence installation in Alamo typically runs $3,500 to $9,000, and most residential runs are finished in two to four working days. That price covers posts set in concrete, framework, fabric, gates, and haul-off on a standard property line. Larger estate lots with long runs or multiple gates push toward the top of that range. Call (888) 419-3650 to schedule a free on-site estimate and get the actual number for your lot before anything is ordered.

How a chain link job actually runs, start to finish
Most homeowners picture a crew unrolling wire and calling it done. The real work is in the layout and the concrete, and that’s where cheap jobs fail two winters later. Here’s the sequence we follow on every Chain Link Fence in Alamo.
Stage 1 – Site walk and layout (day one, 1 to 2 hours)
We walk the property line with you and flag every post location. You decide fence height (4, 5, or 6 feet), gate placement and swing, and whether the run ties into an existing structure or a corner post gets set independently. On acreage lots, this is also where we note grade changes and where a retaining element may be needed.
Stage 2 – Utility locating and line clearing (day one, before digging)
Nothing gets dug until utilities are marked. You’ll see paint or flags along the line, and we confirm the route before a single post hole opens. Brush, low branches, and old fence debris come out so the new line runs true. If a private well line or septic field sits near the route, we flag it now, not mid-hole.
Stage 3 – Post setting (day one into day two)
Terminal posts and corner posts get set in concrete and braced first. Line posts follow at consistent spacing. Concrete needs to cure before any tension goes on, which is why post setting and fabric stretching rarely happen the same day. Line posts are spaced to part with proper tension.
Stage 4 – Framework and fabric (day two into day three)
Top rail goes up, tension bands and brace bands go on, then the fabric gets stretched and tied off at every post. Gates get hung and adjusted so they latch clean. This is the stage where a crooked gate or a sagging bottom edge shows up, so we run the whole line and check it before we leave.
Stage 5 – Walkthrough and cleanup (final day, 30 to 45 minutes)
We walk the finished line with you, check every gate, tension the fabric where it needs it, and haul off leftover material and old fencing. You get the walkthrough before we pack up, and any correction gets made then, not three weeks later.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that actually change the job
Chain link isn’t one product. What you pick between determines both the number and how long the fence looks sharp.
- Gauge of fabric: 11-gauge is the standard residential weight and suits most Alamo side and rear lines. 9-gauge is heavier and costs more per foot, but it holds up far better around livestock, sports courts, and open acreage where a dog or a ball hits it repeatedly.
- Coating: Galvanized steel is the budget choice and weathers to a dull gray. Vinyl-coated (black or green most often) runs higher but disappears against landscaping and holds color through the San Ramon Valley sun. On long estate runs, the coated version reads as a finished boundary rather than a utility line.
- Height: 4 feet keeps dogs in. 6 feet adds privacy and discourages climbing. Anything above 6 feet in most Alamo residential settings should be confirmed against your property rules before ordering.
- Post setting: Concrete-set posts on every terminal and corner, with line posts set deep enough to hold tension. Driven posts are cheaper and faster but shift on clay hillside soil. We set in concrete.
- Gates: Walk gates vs. drive gates. A 12-foot double gate for equipment access changes the framework and the post size, so decide before posts go in.
- Top rail and tension wire: A top rail keeps the fabric rigid along the top. A bottom tension wire keeps the fabric from lifting under a digging dog. Both add cost and both are worth it.
If the fence is part of a larger boundary redo, it often reads best paired with hardscape. Homeowners planning a full property-line project should look at Fence Installation in Alamo, and you can always review our broader Fence Installation work.
What Chain Link Fence costs in Alamo, CA
The typical project lands between $3,500 and $9,000. The low end is a shorter residential run on flat ground with one walk gate and standard 11-gauge galvanized fabric. The high end is a long property-line run on acreage with grade changes, a drive gate, heavy 9-gauge fabric, and vinyl coating.
Five things push the number:

- Linear footage: the single biggest driver. Cost tracks per-foot, so a 150-foot run and a 400-foot run on a multi-acre parcel are different projects entirely.
- Site conditions: slope, rock, roots, and the distance from the nearest access point. Hillside ground off Stone Valley Road takes longer to lay out and set than a flat lot.
- Fabric and coating grade: 9-gauge coated fabric costs meaningfully more than 11-gauge galvanized, and the difference shows up in the line-item, not as a surprise.
- Gates: each gate adds hardware, a heavier post, and hanging time. Drive-width double gates add the most.
- Removal and haul-off: taking out an old fence line adds labor and disposal. Tying the new line into an existing structure can save here.
A written estimate from us itemizes fabric gauge, post spacing, gate count, concrete, and haul-off so you see exactly what the number covers. What it doesn’t cover, unless we note it: any retaining or grading work, utility relocation, and any permit fees. Pricing is upfront and fixed, so the number on the estimate is the number you pay. Financing at 0% for 18 months is available if you want to spread the job out.
See the difference
Before
After
Before
After
Before
AfterWhat Alamo homes specifically do to this job
Alamo is unincorporated, and that changes how a fence project runs. Depending on height, location, and whether it sits in a fire-hazard zone, the review goes through Contra Costa County building and fire departments rather than a city hall. Hillside parcels in the 94507 zip, particularly those with steep access, may trigger slope and drainage attention that a flat Danville lot never sees. We confirm the review path before we order material – guessing on that wastes weeks.
The housing stock matters too. Alamo’s lots are largely custom ranch and Mediterranean estates on half-acre to several-acre parcels, many with long private driveways, detached workshops, outbuildings, and pool areas. That means the fence line often runs farther than a typical subdivision lot, sometimes with a drive gate for equipment access and a separate rear run around a workshop or sports court. Long seasonal stretches of dry summer ground also mean posts must be set and cured properly; rushed post setting on dry, clay-heavy soil is where leaning lines come from. Owners here tend to want it done correctly in one pass, not patched later.
If the fence work goes hand in hand with access upgrades, homeowners often pair this with Concrete Driveways & Concrete Work in Alamo or Asphalt Driveways & Resurfacing in Alamo, so the gate and the approach are coordinated. We cover the full Alamo area.
Serving Alamo, CA – Our Local Coverage Area
We serve Alamo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Chain Link Fence in Alamo
A standard residential run takes two to four working days from the first post hole to the final walkthrough. Long acreage runs with multiple gates and grade changes can stretch to a week. Call (888) 419-3650 with your approximate linear footage and we’ll give you a tighter window up front.
It depends on height and where the fence sits relative to the property line and any fire-hazard zone. In unincorporated Alamo, review runs through Contra Costa County rather than a city office. We confirm what applies to your lot before material is ordered, so call (888) 419-3650 and we’ll sort out the review path during the estimate.
Yes, in most cases. We set posts individually and keep the trench line tight, so there’s no wholesale grading. On estate lots with irrigation, landscaping, or septic fields near the route, we flag the risk during the site walk. Call (888) 419-3650 to set that walk up before work starts.
Most jobs land between $3,500 and $9,000, with the number driven by linear footage, gauge and coating, gate count, and site conditions. You get an itemized written estimate before anything is ordered. Call (888) 419-3650 for an exact quote – estimates are free.
Every Chain Link Fence we install is covered by our 730-Day Done Right Promise. If workmanship falls short within that window, we make it right. Material warranties come from the manufacturer on fabric, framework, and gate hardware. Call (888) 419-3650 and we’ll walk through the coverage in plain terms.
Get a free Chain Link Fence estimate in Alamo
Call (888) 419-3650 and a live person answers around the clock. We’ll ask about your lot size, approximate footage, gate needs, and whether an old line is coming out, then set a time to walk the property and put the number in writing. You’ll get a line-item estimate with fixed pricing and no change-order surprises. The walkthrough comes with a free project estimate and design consult, and there’s $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co.