Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in Danville, CA: What It Involves and What It Costs
Asphalt driveways & resurfacing in Danville typically run $3,500 – $9,000 for a new asphalt surface and $5,000 – $14,000 when the old driveway is torn out and replaced, with most residential jobs finished in two to three working days plus a cure period before you park on it. The number that matters most is your driveway’s square footage and whether we’re paving over a sound base or rebuilding one. Call (888) 419-3650 for a free on-site estimate.

How the Job Actually Runs, Day by Day
Asphalt isn’t complicated, but the sequence is unforgiving. Skip a step and you’ll see the failure within two summers. Here’s the order we work in.
Stage 1: Measure, probe, and decide (day of estimate)
We walk the driveway, measure it, and check what’s underneath. On a lot in the 94526 core, that often means finding the original 1970s base still intact under a tired top layer; on steeper ground we’re looking at drainage and how water leaves the surface. You’ll get a written line-item quote at this stage, and the decision you make here is simple: patch and resurface over an existing base, or full replacement. If the base is failing, resurfacing just buys you two years.
Stage 2: Demo and haul-off (day 1)
Full replacement starts with breaking out the old asphalt and hauling it off. For a typical two-car Danville driveway, that’s most of a day with a crew and a dumpster on site. You don’t need to move cars anywhere special, but you do need the driveway clear by 7 a.m.
Stage 3: Grading and base prep (day 1 – 2)
This is where a driveway lives or dies. We grade for positive drainage away from the house, then compact a crushed aggregate base in lifts. On a sloped lot, that can add half a day. Homeowners who ask us to skip this step to save money are the ones calling back in three years.
Stage 4: Paving (day 2 – 3)
Hot-mix asphalt goes down at 2 – 3 inches compacted for residential use, rolled while it’s still workable. You’ll want to stay off it for 24 – 48 hours and keep heavy vehicles off for longer.
Stage 5: Sealing timeline (weeks later)
New asphalt needs to cure before it’s sealed, usually 6 – 12 months. Sealing too early traps oils and causes soft spots. We’ll tell you when to schedule it. Driveway sealing in Danville runs $250 – $700 when the time comes.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Resurface, Replace, or Switch Materials? The Options and Their Trade-offs
Most Danville homeowners are choosing between four paths. Here’s the honest version of each.
- Overlay resurfacing: new asphalt over a sound existing base. Cheapest and fastest, but only works if the base is solid (roughly $3,500 – $9,000 for a standard driveway).
- Full replacement: tear out, rebuild the base, repave. The right call when you’re seeing alligator cracking or sunken areas (roughly $5,000 – $14,000).
- Paver driveway: Belgard or Techo-Bloc pavers run $7,000 – $18,000 and look exceptional against Danville’s stucco-and-tile architecture, but they cost more and need occasional re-sanding.
- Concrete: $4,500 – $12,000. Holds up well in dry heat but cracks over time on shifting soil. Some owners prefer concrete near the garage apron for a cleaner edge.
If you’re widening the driveway or reworking the approach as part of a larger project, our Driveway & Pavers in Danville page covers the full scope of surfaces we handle.
What Asphalt Driveways & Resurfacing Costs in Danville, CA
Expect $3,500 – $9,000 for resurfacing and $5,000 – $14,000 for a full replacement on a typical Danville driveway. Five variables push a job toward one end or the other:

- Square footage: the single biggest lever. A long hillside approach in Blackhawk costs more than a short flat apron off a cul-de-sac.
- Existing condition: a solid base means overlay pricing. Crumbling base means demo, haul-off, and rebuild.
- Access: tight lots, gates, and steep grades slow a crew down and add labor hours.
- Drainage work: adding a channel drain or regrading toward the street isn’t free, but it prevents the ponding that eats asphalt.
- Permits and right-of-way: if the work touches the public approach, the scope widens.
A written estimate from us includes demo, haul-off, base prep, asphalt, compaction, and cleanup. It typically does not include sealing a year later (that’s a separate line item) or any adjacent concrete work like a walkway or apron repair.
See the difference
Before
After
Before
After
Before
AfterWhat Danville Homes Specifically Do to This Job
Danville is a built-out, high-value Tri-Valley suburb where almost all work happens on existing lots rather than new subdivision builds. Owners here are remodeling $1.5M+ homes they intend to keep, so matching existing detailing matters far more than in San Ramon’s newer tract product. That reality hits driveway work in a few specific ways.
The split between the flat, established 94526 core and the hillside 94506 side (Blackhawk, Tassajara) drives two different playbooks. Flat-lot drives mostly need drainage corrected so runoff leaves the surface; hillside drives need real base engineering because water moves fast under them. Danville’s hot, dry inland microclimate bakes asphalt, so UV degradation and hairline cracking show up faster than in fog-cooled Bay Area cities, and we see it most on driveways that were never sealed. And in the fire-zone hillsides, defensible-space planning can affect what’s hardscaped near the house, which sometimes reshapes the driveway footprint.
We cover the full city, including the Danville neighborhoods near downtown and the hillside tracts. If you’re adding parking as part of a larger build, homeowners often pair this with a New Detached ADU in Danville or a Junior ADU & Interior Conversion in Danville, both of which can change where the driveway needs to run.
Serving Danville, CA – Our Local Coverage Area
We serve Danville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Asphalt Driveways & Resurfacing in Danville
Most Danville jobs take two to three working days, plus 24 – 48 hours off the surface before you drive on it. A straightforward overlay can be done in a single day. Call (888) 419-3650 for a timeline based on your specific driveway.
Work on the driveway itself typically doesn’t require a permit, but anything touching the public right-of-way or the street approach can. We confirm the requirements for your address before we start and pull what’s needed.
Yes, if the base is sound. We probe it during the estimate. If the base is cracked or sunken, an overlay won’t last, and we’ll tell you straight.
Resurfacing runs $3,500 – $9,000 for a standard residential driveway, with full replacement at $5,000 – $14,000. Call (888) 419-3650 for an exact quote.
Every job is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. Live person, 24/7 if a concern comes up after the crew leaves.
Get a Free Estimate for Asphalt Driveways & Resurfacing in Danville
We’ll walk your driveway, check the base, and give you a written line-item quote with no surprises. Call (888) 419-3650 to schedule your free on-site estimate for asphalt driveways & resurfacing in Danville, or to ask about our Driveway & Pavers service. A live person answers around the clock.
Written by the team at Groundwork Construction Co.