Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
(888) 419-3650
Chain Link Fence in Danville: What You’re Actually Looking At
A chain link fence in Danville typically runs $3,500 – $9,000 for a standard residential lot, and most installs finish in two to four days once materials land. The number swings on height, footage, gauge, and whether the run sits on a slope. For a property line on a Danville hillside lot, you should know by day two whether the grade forces custom post work. Call (888) 419-3650 and we’ll price it from your actual boundary, not a square-foot guess.

How a Chain Link Fence Goes In: The Real Day-by-Day Sequence
Chain link is a fast job compared to wood or masonry, but the prep is where the fence either holds for twenty years or starts sagging by year three. Here’s how we sequence it on a Danville property.
Day 1: Site walk and layout
We walk the boundary with you and confirm the run. This is where you lock in corner posts, gate location, and gate swing. If your parcel has a survey marker, we use it. If you don’t have one and the setback is tight against a neighbor’s lot, that’s your call to make before we set a single post. Terminals and corners go where design says, not where convenience says.
Day 1 – 2: Digging, setting, and the concrete cure
Posts get dug and set in concrete. This part runs one to two days depending on footage and how much rock the soil gives you. Danville’s clay-heavy soils are a known variable; they hold moisture in winter and shrink in dry months, which is exactly why we set posts deep rather than shallow and fast. Concrete needs to cure before tension. That’s a real wait, not a skipped step, and any installer who tells you otherwise is cutting the one part of the job that keeps the fence vertical.
Day 2 – 3: Rails, tension wire, and fabric
Top rail goes up, tension wire or bottom rail goes on depending on what you chose, and the fabric gets pulled. Pulling tension correctly is the whole trick: too loose and the fence oils and sags, too tight and you stress the posts. Background-checked, uniformed technicians handle this stage. You don’t need to be home for it.
Day 3 – 4: Gates, ties, and the top finish
Gates get hung, hardware set, fabric tied at even intervals, and the top edge finished (knuckle or twisted, depending on your spec). You walk it with us. Any post that’s out of line or any gate that doesn’t swing clean gets fixed before we call the job done, and the work is covered by our 730-Day Done Right Promise.
Closeout: cleanup, and where the wider project fits
We haul off excess soil, clean up the property, and leave the run ready for whatever comes next. If the chain link is one piece of a bigger exterior plan, it’s worth reading our Fence Installation in Danville page for the full-scope view before you lock the boundary in.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between on a Chain Link Fence
Chain link sounds like one product. It isn’t. Most of the decisions below will move your price more than footage will, so here’s the honest trade-off on each.
- Gauge of wire: 11.5-gauge is the residential standard and holds up fine. 9-gauge costs more and takes a hit from a deer or a ball without denting. If the fence borders a school, park, or busy street, spend on the heavier wire.
- Height: 4 feet is the cheapest and most common for a backyard. 5 and 6 foot jump in cost because posts and rails get beefier. In Blackhawk and other Danville neighborhoods with HOA design rules, height is often capped, so check before you commit.
- Coating: Galvanized is the baseline and rusts slowly in dry heat. Vinyl-coated (usually green or black) costs 15 – 25% more and reads more like a yard fence than a utility line. In Danville’s intense summer sun, the coating also protects the wire from UV fatigue.
- Top finish: Knuckle-top is safer for pets and kids. Twisted/barbed top is a security spec. Pick based on who uses the yard.
- Gates: A single walk gate is standard. A double drive gate adds a few hundred dollars but means you can pull a trailer or RV through without moving a panel.
- Bottom treatment: Tension wire keeps the fabric tight to the ground and stops dogs from pushing under. A bottom rail costs more but holds up better against a slope.
On the finish side, if you want hardware that’s actually rated for outdoor exposure, we spec brands we trust and won’t swap in whatever the supply house has on the shelf. That same discipline applies across our trades, whether it’s Toto and Grohe fixtures in a bathroom or the fence hardware on your property line.
What Chain Link Fence Costs in Danville, CA
The lead range for a residential chain link fence in Danville is $3,500 – $9,000. Most single-family lots land in the middle of that. Here’s what moves the number up or down.

| Line Item | Typical Range |
|---|---|
| Standard 4′ galvanized, flat lot, under 150 lf | $3,500 – $4,800 |
| 5′ – 6′ height, vinyl-coated, 150 – 250 lf | $5,500 – $7,500 |
| Sloped or rocky terrain, custom post work | Adds $600 – $1,500 |
| Double drive gate with hardware | Adds $500 – $1,200 |
| Removal and haul-off of existing fence | Adds $400 – $900 |
What moves it to the low end: a flat, rectangular lot on good soil, a standard 4-foot run, and no demo. What pushes it high: steep terrain (very common on the 94506 hillside side), heavy rock excavation, tall security spec, or a run that needs multiple gates and corners. A fenced boundary line that’s never been surveyed can also add cost if we have to re-set the line before posts go in.
What’s in a written estimate: materials, labor, post setting and concrete, gates, hardware, cleanup, and permit pull where required. What’s not: survey work if the boundary isn’t marked, unexpected rock excavation, and any landscaping restoration. We line-item each of these up front, so there’s no surprise invoice when the excavator hits something. No-hassle upfront pricing, the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Danville Homes Specifically Do to a Chain Link Fence Job
Danville is a built-out Tri-Valley suburb, which means almost every fence job here is a remodel, replacement, or add-on to an existing lot, not new subdivision construction. That changes the job. On the flat 94526 core, most lots have an existing fence, a surveyed boundary, and mature landscaping that has to be worked around. On the hillside 94506 side toward Blackhawk and Tassajara, the grade is the whole story: posts need to be set deeper, panels have to step down the slope, and in the western WUI fire-zone areas, the fence line sometimes gets caught up in defensible-space and access discussions that affect where it can sit. We see plenty of old rusted runs on 1960s-to-1990s ranch lots where galvanized wire has slowly given up, and hillside installs where a previous owner set posts too shallow and the fence is leaning by year four. If your fence is going up alongside a new pad or walkway, homeowners often pair this with a fresh hardscape, so look at our Concrete Driveways & Concrete Work in Danville page and our Asphalt Driveways & Resurfacing in Danville page if the project is growing.
Serving Danville, CA – Our Local Coverage Area
We serve Danville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Danville
Most residential chain link fence projects in Danville finish in two to four working days from material delivery. The variable is the concrete cure between post setting and tension, which we don’t rush.
In most cases a low residential chain link fence on a single-family lot doesn’t need a building permit, but HOA rules and local height limits still apply, and a property-line fence touching an easement can. The safest move is to confirm before we dig, so call (888) 419-3650 and we’ll walk through what applies to your lot.
Yes, in most cases. We plan the run around trees and beds, and post spacing gets adjusted where a root mass makes a clean dig impossible.
A standard walk gate adds $250 – $500 over the base run, and a double drive gate adds $500 – $1,200 depending on width and hardware. Total job still typically lands inside the $3,500 – $9,000 range.
Every chain link fence we install is backed by our 730-Day Done Right Promise. If a post is out of line, a gate sags, or a panel needs re-tensioning within that window, we come back and fix it.
Get a Free On-Site Estimate for Your Chain Link Fence in Danville
Call (888) 419-3650 to schedule a free on-site estimate for chain link fence in Danville. A live person answers, day or night. We’ll walk the boundary, confirm the run and gates, and hand you a written line-item price with no pressure to sign on the spot. That’s how our fence installation work gets priced across Danville, and it’s the same standard every job gets from the team at Groundwork Construction Co.
Written by the team at Groundwork Construction Co.