Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Window Replacement in Pleasant Hill: What It Costs and What It Takes
Window replacement in Pleasant Hill, CA typically runs $4,500 – $15,000 for whole-home or multi-opening projects, with most single-family jobs landing in the $8,000 – $12,000 range. The work itself takes one to three days once materials arrive, though custom sizes and stucco repairs can stretch the timeline to a week. Call (888) 419-3650 to schedule a free on-site estimate with no obligation.

How We Handle the Job, Start to Finish
Replacing windows on a mid-century ranch isn’t the same as swapping glass in a newer tract home. Here’s the actual sequence for a typical Pleasant Hill window replacement, with realistic durations at each stage.
Stage 1: In-home measurement and scope (1 – 2 hours)
We measure every opening, check the framing for rot or settling, and note whether the existing windows are aluminum slider, wood double-hung, or original steel casement. You decide the replacement style and glass package at this visit. This is also where we flag any stucco or siding repair the job will need – Pleasant Hill’s 1950s – 70s homes frequently have hairline cracks around original frames that show up once the old units come out.
Stage 2: Permitting and order (2 – 4 weeks)
Window replacement in Pleasant Hill requires a building permit through the city’s permit counter. We pull it, handle the inspection scheduling, and order your units. Standard sizes in stock vinyl or fiberglass arrive in about two weeks; custom sizes and Andersen or Marvin orders run three to four weeks. You’ll approve the final spec sheet before anything goes to manufacturing.
Stage 3: Site prep and demo (half day)
We cover floors and furniture, remove old units, and inspect the rough opening. Any rot, water damage, or out-of-square framing gets documented and either repaired on the spot or quoted before we proceed. No surprises mid-job.
Stage 4: Installation and flashing (1 – 2 days)
New windows go in, get shimmed and leveled, then sealed and flashed properly. That flashing detail matters more in Pleasant Hill than in drier inland towns – winter rain drives sideways against west-facing walls, and a poorly flashed frame leaks within two seasons.
Stage 5: Trim, stucco, and inspection (1 – 2 days)
We reinstall interior trim, patch exterior stucco, and call for the city inspection. You walk the job with us before we leave. The work is backed by our 730-Day Done Right Promise – if anything’s off, we come back and we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
You’ll make four decisions before we order anything. Here’s the honest trade-off on each.
- Frame material: Vinyl is the budget choice, low maintenance, decent for most Pleasant Hill ranch homes but limited in color. Fiberglass handles heat and won’t warp, which matters given the hot dry summers here. Wood-clad aluminum (Andersen and Marvin both make strong options) looks best on mid-century homes and lasts, but costs 30 – 50% more.
- Glass package: Dual-pane Low-E is the standard for California climate zones and helps with summer heat gain. For homes backing oak ridges or open space, we recommend tempered glass in fire-exposure zones and laminated glass where ember resistance matters.
- Operation style: Double-hung and casement are the most common replacements. Sliding windows work well on ranch-style picture walls. Fixed picture windows cost less and give more light but need operable units beside them for ventilation.
- Exterior trim and color: Stucco patching to match existing texture costs more than replacing trim with Hardie board. Choose based on whether you’re planning a full exterior refresh – many homeowners pair this with Vinyl Fence in Pleasant Hill to complete the backyard while the crew is on site.
What Window Replacement Costs in Pleasant Hill, CA
Window replacement in Pleasant Hill runs $4,500 – $15,000 for typical residential projects. That range covers everything from a few front-facing units on a small ranch to a full replacement across a two-story 1970s home. Here’s what moves the number:

- Unit count and size: Each standard opening adds roughly $600 – $1,200 installed. Oversized picture windows and custom shapes push higher.
- Frame material: Vinyl sits at the low end; fiberglass and wood-clad add 25 – 50%.
- Existing condition: Rot, termite damage, or out-of-square framing adds repair cost. Mid-century homes here often need this work.
- Stucco and trim repairs: Exterior patching runs $300 – $800 per opening depending on the existing finish.
- Permit and inspection: Pleasant Hill’s permit fees are modest, but required inspections add scheduling time and require us to be on site.
Every written estimate we hand you itemizes windows, labor, trim, stucco, and permit. No line goes missing. The number you see is the number you pay. Talk through your scope with us at (888) 419-3650 – estimates are free and the design consult is included.
See the difference
Before
After
Before
After
Before
AfterWhat Pleasant Hill Homes Specifically Do to This Job
Pleasant Hill is a built-out post-WWII Contra Costa suburb, and that shapes window replacement in ways that don’t show up on a Concord or Walnut Creek new-build. The dominant stock is 1950s – 1970s single-story ranch, much of it original aluminum slider and wood double-hung units now failing at the seals. Homes near the oak-covered ridges back onto open space, which brings fire-resistant exterior detailing into the spec conversation – tempered or laminated glass, non-combustible trim, and ember-resistant flashing all become real decisions rather than upsells. Properties along the hillside and canyon edges also sit on engineered or slab-on-grade foundations, and window openings on those homes are often out of square after 60 years of settling. We check for that before ordering. The city’s permit culture is strict and small, so we pull proper permits and pass inspection on every job rather than skipping the process. Contractors who know Pleasant Hill also know that original stucco is often a one-coat or thin-coat job that patches differently than modern three-coat systems – our crews match the look rather than slapping on mismatched material. If your project extends beyond windows, the wider scope lives on our Windows & Doors in Pleasant Hill page; for backyard work, homeowners often pair this with Aluminum Fence in Pleasant Hill. See all of our Windows & Doors work, or check the broader Pleasant Hill service area.
Serving Pleasant Hill, CA – Our Local Coverage Area
We serve Pleasant Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Window Replacement in Pleasant Hill
Most Pleasant Hill window replacement projects take one to three days of on-site work once materials arrive, with the full timeline from signed contract to final inspection running four to seven weeks because of permitting and product lead times. Call (888) 419-3650 to get exact dates for your scope.
Yes, the City of Pleasant Hill requires a building permit for window replacement, and the work must be inspected. We handle the permit application, fee, and inspection scheduling as part of the job. Call (888) 419-3650 for a quote that includes the permit line.
In most cases yes. Standard like-for-like window replacement doesn’t disturb plumbing or electrical, and the work is confined to the window opening and immediate framing. If your project involves resizing openings or extending walls, we’ll flag it before any bids go out. Call (888) 419-3650 to talk through your situation.
Window replacement in Pleasant Hill runs $4,500 – $15,000 depending on unit count, frame material, and existing condition. A handful of front-facing windows sits near the low end; a whole-home job on a two-story 1970s build climbs toward the top. Call (888) 419-3650 for an exact quote – estimates are free and itemized.
Every window replacement we complete is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. Manufacturer warranties on the units themselves ride on top of that. Call (888) 419-3650 if you have questions about what’s covered.
Schedule Your Free Window Replacement Estimate
Call (888) 419-3650 to schedule a free on-site estimate for window replacement in Pleasant Hill. We’ll measure your openings, walk through the material options, and hand you a written line-item quote the same visit – no pressure, no follow-up sales calls. The design consult is included, 0% financing is available for 18 months, and projects over $10,000 get $1,000 off. Live person, 24/7, ready to talk.
Written by the team at Groundwork Construction Co.