Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Driveway Repair & Replacement in Danville: What It Takes and What It Costs
Driveway repair & replacement in Danville runs $5,000 – $14,000 for a full replacement, and most jobs wrap in three to five working days once we start. Smaller fixes like crack repair, re-sloping a low spot, or rebuilding a failed apron cost far less and can often be handled in a day. Call (888) 419-3650 and we’ll give you a written line-item quote for your specific driveway.

How We Run a Driveway Repair & Replacement Job, Start to Finish
We don’t hand you a number over the phone and disappear. Here’s the actual sequence, stage by stage, so you know what’s happening and when you’ll be asked to make a call.
Day 1: Site check and layout
We walk the driveway and look at what’s under it. That means checking the subgrade, spotting tree roots pushing up through the slab, and finding where the old drainage runs. You decide the final material and grade at this stage. If there’s a soft spot or a failing base, we tell you before we quote, not after.
Day 2: Demo and haul-off
We break out the old concrete or asphalt and load it out. On a standard two-car driveway that’s a full day. If the existing driveway is tied into a curb, gutter, or sidewalk, that joint gets cut clean so the new edge ties in properly. You don’t have to decide anything here – we handle it.
Day 3: Base prep and grading
This is where most driveways fail, and it’s the step shortcuts skip. We compact the sub-base, set the slope so water runs away from the house and toward the street, and check the grade against the garage floor. A driveway that pitches the wrong way will pool water at your foundation within a season. This is also when we confirm whether the driveway sits in a flood-prone spot, which matters in parts of the Danville flats.
Day 4: Paving or pouring
Paver installations go down over a compacted bedding layer; concrete gets formed and poured. You’ll want to stay off the surface for the cure window – 24 to 48 hours for foot traffic on concrete, a week before you park on it. Pavers you can walk on the same day.
Day 5: Finishing and final walkthrough
We seal, sweep, and walk the job with you. If anything’s off, we fix it before we leave. And if something shows up a month later, the 730-Day Done Right Promise means we come back and make it right – no fine print, no “that’s not covered.”
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
You’ve got real decisions to make here, and the honest trade-offs matter more than the sales pitch.
- Concrete: The most common choice on Danville’s older homes. It runs $4,500 – $12,000 installed. It’s durable and familiar, but it cracks over time in this climate – the hot inland summers plus seasonal clay soil movement will show up as hairline cracks within a few years. You can control that with proper jointing and a good base.
- Pavers: $7,000 – $18,000 for a full driveway. Higher upfront cost, but individual units can be lifted and reset if a section settles, which concrete can’t. Belgard and Techo-Bloc both make pavers that hold up under the Tri-Valley sun. Best fit if you want the driveway to match the California ranch and Mediterranean look many Danville homes already have.
- Asphalt: $3,500 – $9,000. Cheapest of the three, and it handles freeze-thaw and heat cycles well if it’s sealed every few years. It softens in July heat, so it’s not the pick if heavy trucks roll over it.
- Stamped or textured concrete: Concrete with a decorative finish. Looks like stone or brick, wears like concrete. It sits at the top of the concrete range and adds a finish step to the schedule.
If your project is part of a full Driveway & Pavers in Danville scope that includes a front walkway or a new front patio, we’ll price the whole thing together so the grades tie in. Our Driveway & Pavers service covers the broader range if you want to see what else fits.
What Driveway Repair & Replacement Costs in Danville, CA
Here’s the honest range, and the factors that push a job from the bottom of it to the top.
| Item | Typical Danville range |
|---|---|
| Full driveway replacement | $5,000 – $14,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Paver driveway installation | $7,000 – $18,000 |
| Asphalt paving | $3,500 – $9,000 |
| Driveway sealing (maintenance) | $250 – $700 |
Five things move that number:

- Driveway size. A single-car apron and a long drive with a turnaround are two different jobs. Square footage is the biggest single variable.
- Existing condition. A cracked but otherwise solid slab can sometimes be patched. A driveway with a failed base, root intrusion, or settlement under the apron needs full demo and re-base, which pushes you toward the high end.
- Drainage and grade work. Rebuilding a driveway that currently pitches toward the house or pools at the street takes more prep and may mean adding a channel drain.
- Material grade. Standard concrete sits low. Decorative finishes, thicker pavers, or specialty Belgard or Tremron lines push the number up.
- Site access and haul-off. Long driveways, tight gates, or a lot of demo debris mean more truck time and higher disposal cost.
Every written estimate from us breaks out each of those lines. Nothing gets added later as a surprise change order. If you want the driveway sealing instead of a replacement, that’s a separate smaller job and we’ll tell you honestly whether sealing will actually extend the life of what you’ve got.
See the difference
Before
After
Before
After
Before
AfterWhat Danville Homes Specifically Do to This Job
Danville is a built-out, high-value Tri-Valley suburb, which means most of our work here happens on existing lots, not new builds – homeowners remodeling $1.5M+ homes they plan to stay in. That changes the driveway job. On a remodel, the driveway often has to match mature detailing the house already has, and the existing concrete or pavers were probably poured decades ago. We’re cutting out and re-tying to surfaces that have settled unevenly over 30 years.
The split between the flat, established 94526 core and the hillside 94506 side of town drives two different playbooks. Down in the 94526 flats, you’re dealing with clay-heavy soil that shifts with the wet-dry cycle and stalls in the summer sun – so base prep and jointing matter more than anything else. Up in the Blackhawk and Tassajara hillsides, the driveway slope and access are the whole job. A hillside driveway needs drainage figured out first, and the western hillside is a WUI fire zone, so how the driveway supports fire access to the house is a real consideration, not an afterthought.
We serve the whole of Danville, from the 94526 flatlands to the 94506 hills, plus the surrounding Blackhawk, Alamo, Clayton and Walnut Creek areas.
Serving Danville, CA – Our Local Coverage Area
We serve Danville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Driveway Repair & Replacement in Danville
A full replacement is typically three to five working days from demo to final walkthrough. Small repairs – crack patching, re-sloping a low spot, rebuilding a failing apron – usually finish in a single day. Call (888) 419-3650 and we’ll give you a realistic schedule for your specific driveway.
It depends on what’s changing. A straight like-for-like replacement usually doesn’t trigger a permit, but if the driveway ties into the public sidewalk, curb, or street apron, the town’s engineering review applies. We walk you through what your specific job needs before we start, so there are no surprises at inspection.
Often yes. If the concrete is cracked but the base is sound, we can patch, re-slope, or rebuild just the failed section. We only recommend full replacement when the base has failed or the settlement is widespread. Call us for an on-site look and we’ll tell you which route makes sense.
Full replacement runs $5,000 – $14,000 depending on size, material, and how much base and drainage work is needed. Concrete sits in the $4,500 – $12,000 range, pavers in the $7,000 – $18,000 range, and asphalt in the $3,500 – $9,000 range. Call (888) 419-3650 for an exact quote – estimates are free.
Every driveway job we do is covered by the 730-Day Done Right Promise. If the workmanship fails within that window, we come back and fix it. That’s one of the longest workmanship guarantees in residential construction, and it’s backed in writing.
Get Your Free Driveway Estimate in Danville
We start with a free on-site visit and a written line-item estimate, so you know exactly what you’re paying for before anything gets demoed. If your driveway is part of a bigger backyard plan, homeowners often pair this with ADU Site Prep & Utilities in Danville or a Junior ADU & Interior Conversion in Danville, and we can scope both together. Call (888) 419-3650 to schedule your estimate. A live person answers, day or night.
Written by the team at Groundwork Construction Co.