Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Antioch, CA: What It Costs and What the Job Actually Involves
Metal roofing in Antioch typically runs $15,000 to $40,000 for a full residential install, and a straightforward ranch home on the flats usually takes five to nine working days from tear-off to final inspection. The number swings on roof size, pitch, how many layers come off, and whether you choose exposed-fastener panels or standing seam. Call (888) 419-3650 and we’ll walk your roof, measure it, and put the range in writing before you commit to anything.

How a Metal Roof Goes On: Stage by Stage
Metal isn’t a one-day swap, and anyone who tells you otherwise is skipping steps that show up as leaks two winters later. Here’s the actual sequence we run on an Antioch home, with the decisions that land on you at each stage.
- Day 1 – tear-off and deck inspection. We strip the existing shingles or panels down to the sheathing and check the deck for soft spots, rot, and the wind-lift damage that Delta gusts leave behind on older roofs. You decide then and there whether we replace compromised decking or sister it in; we photograph everything and price it before we touch it.
- Day 2 – underlayment and flashing. A high-temp synthetic underlayment goes down, then we address penetrations, valleys, and the eave and rake edges. This is the layer that does the waterproofing; the metal is the shell. On the flats, where afternoon wind drives dust and rain sideways, the eave detail is where cheap installs fail first.
- Days 3 to 6 – panel setting. Panels go up in sequence, screwed or seamed depending on the system you picked. Standing seam panels are rolled to length and run full slope with concealed fasteners; exposed-fastener panels come in fixed lengths and get screwed through the face, which is faster but means you’ll be replacing grommeted screws down the road.
- Days 6 to 8 – trim, ridge, and gutters. Ridge cap, hip and valley trim, and any gutter rework finish the envelope. This is the stage where the roof starts reading as a finished roof instead of a construction site.
- Final day – cleanup and inspection. Magnet sweep for fasteners, haul-off, then the permit inspection. You walk the roof with us, and any punch-list item gets handled before we call the job done.
Where a full roof system is part of a bigger project, we scope it alongside Roofing in Antioch so the metal work lines up with everything else on the house. Our wider Roofing service covers the full range if you’re still deciding which direction to go.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Metal roofing isn’t one product. The choices below are the ones that actually change the price and the lifespan, and the trade-offs are honest, not sales talk.
- Standing seam vs. exposed-fastener panels. Standing seam hides the fasteners under raised seams and holds up best against wind and water; it’s the premium choice and costs more per square. Exposed-fastener panels are cheaper up front and perfectly serviceable, but the screw washers age in the sun and eventually need attention.
- Steel vs. aluminum. Steel panels are strong and cost-effective, with a factory finish that holds color well. Aluminum resists corrosion and is lighter, which matters on older framing, but it carries a higher price tag.
- Kynar 500 vs. standard finishes. A Kynar 500 (PVDF) finish resists fading and chalk far longer under the Delta sun, and it’s the paint system we’d point you toward for longevity. Standard polyester finishes cost less and hold color for fewer years.
- Panel profile and color. Rib height, seam spacing, and color all affect wind performance and curb appeal. A darker color reads sharp but gets hotter; a lighter finish reflects more sun and stays cooler on the flats.
We quote these side by side, with the warranty terms for each, so you compare real numbers instead of guesswork.
What Metal Roofing Costs in Antioch, CA
A full metal roofing installation in Antioch runs $15,000 to $40,000. The low end covers a modest ranch with straightforward pitch and a standard exposed-fastener system; the high end is a larger or steeper home with standing seam, new decking, and complex valleys and hips.
Five variables push the number:
- Roof size and pitch. More squares and steeper slopes mean more material, more labor, and more time on the roof.
- Existing condition. Rot, multiple shingle layers, or a failed deck drive the tear-off and repair line up.
- Material grade. Standing seam and aluminum sit at the top; standard steel panels sit lower.
- Complexity. Dormers, skylights, and tight valleys add fabrication and flashing time.
- Permit scope. A full re-roof permit and inspection is part of the job; we pull it and pass it as standard.
Every written estimate is line-item, with the material, the tear-off, the decking allowance, and the permit spelled out. We hold the price with upfront pricing and no change orders; the number you see is the number you pay, and 0% financing for 18 months plus $1,000 off projects over $10,000 is available on qualifying jobs.
See the difference
Before
After
Before
After
Before
AfterWhat Antioch Homes Specifically Do to This Job
Antioch sits on the Delta at the foot of the East Bay hills, and that geography writes the spec on every roof here. The older flats, from downtown blocks out toward the river-adjacent streets, hold 1950s-to-1970s ranch tract homes with original single-pane windows, aging slabs, and framing that’s seen decades of wind-driven dust and seasonal soil movement. Those homes often have decking that’s softened at the eaves, so the tear-off inspection is where the real scope lives. The southern hills subdivisions, built from the 1980s into the 2000s, tend to hold up better structurally but face their own wind exposure on the ridgelines.

Because the Delta pushes persistent afternoon wind off the San Joaquin River, wind-rated attachment is not optional here. We fasten panels to the manufacturer’s wind-uplift spec and pull the permit through the city, which means a real inspection on the finished roof. The hot, dry summers also mean we schedule pours and sealant work around the heat, and the fog-influenced winters are where a bad flashing job reveals itself. We cover Antioch and the surrounding Delta towns, and the same wind logic applies.
Many homeowners pair the re-roof with Impact Windows & Doors in Antioch so the whole envelope handles the wind together, or with Window Replacement in Antioch when the original single-panes are past saving. Both make the roof work harder for you.
Serving Antioch, CA – Our Local Coverage Area
We serve Antioch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Metal Roofing in Antioch
Most residential metal roofs in Antioch take five to nine working days from tear-off to final inspection, with larger or steeper homes running toward the top of that range. Call (888) 419-3650 for a walk-through and a dated schedule before you sign anything.
Yes, a full re-roof requires a permit through the city, and the finished roof gets inspected. We pull the permit and pass the inspection as part of the job, and the line item shows up in your written estimate so there’s no surprise later. Call (888) 419-3650 with your address and we’ll confirm the scope.
In most cases the metal roof goes on over the existing framing without touching plumbing or structure, since it’s a roof system, not a remodel. The exception is when the tear-off reveals rotted decking or a framing issue, and we price that before we proceed. Call (888) 419-3650 to schedule the inspection that tells us which case you’re in.
Metal roofing in Antioch runs $15,000 to $40,000, depending on size, pitch, decking condition, and whether you choose standing seam or exposed-fastener panels. Call (888) 419-3650 for an exact quote – the on-site estimate is free.
Every metal roofing job we do is covered by our 730-Day Done Right Promise, and the material carries its own manufacturer warranty on top. If it’s not done right, we make it right, and the terms are in writing before work starts. Call (888) 419-3650 to review the warranty with us.
Get a Free Metal Roofing Estimate in Antioch
Metal roofing is a decision worth getting right the first time, and the best way to price it is on your actual roof. Call (888) 419-3650 for a free on-site estimate in Antioch. A live person answers around the clock, we measure the roof, walk the decking, and hand you a written line-item quote with the material options and financing laid out. No pressure, no vague bids.
Written by the team at Groundwork Construction Co.