Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Patios, Walkways & Pool Decks in Danville: What It Really Takes
Most hardscape projects for patios, walkways and pool decks in Danville run $3,500 – $11,000 for a paver patio, with walkways and pool-surround work scaling from there depending on square footage and how much of the existing surface comes out. Plan on two to four weeks from demo to the last sand-swept joint on a typical job. Call (888) 419-3650 and we’ll walk the yard with you and put a real number in writing.

From First Cut to Final Sweep: How We Build These
Hardscape is one of those jobs where the visible work is the easy part. What happens underneath decides whether your patio still drains correctly in year eight. Here’s the sequence we run, and what you’ll be deciding along the way.
Stage 1: Layout and demo (days 1 – 3)
We start by marking the actual layout in the yard with stakes and string so you can stand on the future patio and see how it sits against the house, the fence line and the pool coping. Any changes to shape happen now, cheaply. Then the crew removes the old concrete, pavers or turf, and hauls it out. On a 400-square-foot patio this usually takes two to three days, longer if there’s a monolithic pour with rebar or an old pool deck bonded to the shell.
Stage 2: Base prep and grading (days 2 – 5)
This is the stage nobody sees and everybody’s neighbor has skipped. We excavate to depth, then compact class II base rock in lifts, checking slope with a laser so water runs away from the house and pool rather than toward them. Depending on soil and square footage, this takes two to four days. If your yard is holding water after rain, tell us before we start, because drainage correction is far cheaper now than after the pavers are in.
Stage 3: Drainage and utility rough-in (overlaps stage 2)
If the plan includes a French drain, a channel drain at the pool edge, low-voltage lighting conduit or an outdoor kitchen gas stub, the lines go in before anything hard is laid. This is your last realistic window to add those. Retrofitting a gas line under a finished patio means cutting the patio.
Stage 4: Setting the surface (days 5 – 10)
Pavers get laid on the compacted base with a screeded bedding layer, cut tight around the pool coping and any curves, then swept with polymeric sand and compacted again. Poured surfaces get formed, reinforced and finished. A 500-square-foot patio is typically three to five working days of setting, plus cure time on poured work.
Stage 5: Detailing and walkthrough (days 10 – 14)
We finish the edges, clean the joints, hose everything down and walk the job with you. That walkthrough is where we point out the expansion joints, the drain inlets and the slope, so you know what you’re looking at years from now. Every project carries our 730-Day Done Right Promise; if something shifts or settles wrong, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
There’s no single right surface. It depends on how you use the space, what your house looks like, and how much maintenance you want to sign up for.
- Interlocking concrete pavers – the workhorse choice for patios, walkways and pool decks. Individual units can be lifted and reset if something shifts, which matters around a pool where settling is common. Mid-range cost, strong durability, wide color range. Belgard and similar lines give you the most blend options.
- Poured and stamped concrete – lower cost per square foot, fewer joints, and a clean modern look when it’s done well. The trade-off is cracks over time and no easy way to repair one section without a visible patch.
- Natural stone (flagstone or travertine) – the high end, and the choice that best fits Danville’s Mediterranean-style stucco homes. Travertine stays cool underfoot around a pool in a way concrete doesn’t. Higher material cost and more labor to set.
- Decking (composite or wood) for raised areas – when the grade steps up sharply from the house to the yard, a raised deck can cost less than importing fill and building retaining walls. More upkeep than pavers if you go with real wood.
Around the pool itself, slip resistance and heat matter more than color. We’ll show you samples and tell you honestly which ones hold up under intense direct sun. If your project grows into a full front-to-back exterior plan, that’s a natural point to look at our Driveway & Pavers in Danville work so the surfaces tie together.

What Patios, Walkways & Pool Decks Cost in Danville, CA
Plan on $3,500 – $11,000 for a paver patio in Danville. A pool deck or a long walkway sits in a similar per-square-foot band, and combined projects land higher. Here’s what moves the number up or down:
- Size and access. A 200-square-foot patio is a small job with fixed setup costs; 800 square feet spreads those costs across more area, lowering the per-foot price. Hillside lots in 94506 where a wheelbarrow can’t reach the work zone cost more in labor.
- What has to come out. Removing and hauling old concrete adds real cost versus building over open dirt.
- Drainage and grade. A flat yard needs little; a slope that needs retaining or a pool edge that needs re-grading adds days and material.
- Material grade. Standard pavers sit at the bottom of the band; travertine and natural stone move you toward the top.
- Permits and pool safety. Work touching the pool shell, fencing or safety barriers can pull in inspection requirements that add time and cost.
Your written estimate lists demo, base, drainage, material and labor as separate line items, so you can see exactly where the money goes. What it won’t include unless we flag it up front: unforeseen underground surprises like an old septic line or unmarked irrigation main. We’d rather tell you that now than surprise you mid-job, because with us the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhy Danville Yards Behave the Way They Do
Danville is a built-out, high-value Tri-Valley town, and nearly every hardscape job here is a remodel on an existing lot rather than part of a new build. That changes the work. You’re pulling out a deck or patio that a previous owner installed, and you have to match it to a house the owners intend to keep. In the flat, established 94526 core, that usually means tying a new patio into mature landscaping and an existing pool, working around trees whose roots you can’t cut. On the hillside 94506 side around Blackhawk and Tassajara, the concerns shift to grade, retaining, and fire-zone detailing, where access and defensible space shape what can even be built. The inland Tri-Valley sun is the other factor. It bakes exterior surfaces far harder than the fog-cooled towns nearer the bay, so sun exposure and heat retention become real selection criteria, not afterthoughts. We see this on the ground across Danville, and it’s why we check slope and sun exposure before we ever talk color. If the project widens into site work, homeowners often pair this with ADU Site Prep & Utilities in Danville to get grading and utility runs handled in one pass.
Serving Danville, CA – Our Local Coverage Area
We serve Danville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Patios, Walkways & Pool Decks in Danville
Most patios, walkways and pool decks in Danville take two to four weeks from demo to final cleanup, with the exact time driven by square footage, how much old surface comes out, and drainage scope. Call (888) 419-3650 for a schedule based on your actual yard.
It depends on the scope. A simple ground-level patio on grade usually doesn’t; raised decks, retaining walls above a certain height, structural changes around a pool, and anything affecting pool safety barriers typically do. We confirm the requirements for your address before work starts and pull what’s needed.
Yes, in most cases. New patios, walkways and pool surrounds are built over existing grade, so plumbing and structure stay put unless your plan adds a gas stub, drain line or outdoor kitchen, which we rough in before the surface goes down. Call (888) 419-3650 and we’ll confirm what your layout allows.
Pool decks price in a similar per-square-foot band to patios, starting around $3,500 for smaller surrounds and climbing with size and material. Travertine and natural stone push toward the high end; standard pavers keep you lower. Call (888) 419-3650 for an exact quote.
Every patio, walkway and pool deck we build is covered by our 730-Day Done Right Promise. If it isn’t done right, we make it right, for two full years after the crews leave. That covers workmanship, not just materials.
Get a Free On-Site Estimate for Your Danville Hardscape
We’ll come out, walk the yard with you, talk through materials and drainage, and hand you a written line-item estimate at no cost. No pressure to sign on the spot. Call (888) 419-3650 to schedule your free estimate for patios, walkways or pool decks in Danville. A live person answers, day or night. Planning a bigger exterior overhaul? Pair this with Driveway & Pavers or take the whole thing inside with Full Kitchen Remodeling in Danville.
Key Takeaways
- Paver patios in Danville typically run $3,500 – $11,000, with pool decks and walkways scaling by square footage and material.
- Most jobs take two to four weeks, with base prep and drainage being the stages that decide long-term performance.
- Hillside 94506 lots bring grade, retaining and fire-zone considerations; the flat 94526 core leans toward matching existing landscaping and pools.
- Every project carries the 730-Day Done Right Promise and an upfront written price with no change-order surprises.
Written by the team at Groundwork Construction Co.