Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Antioch, CA: What the Job Actually Involves
Vanities, tile and fixtures work in Antioch typically runs $9,000 – $28,000 when you’re replacing the vanity, retiling the floor or shower surround, and swapping out the faucet, shower valve, and toilet in one coordinated job. Most projects take 8 – 14 working days once materials are on site, and the schedule hinges on countertop fabrication and tile curing time more than on labor. Call (888) 419-3650 for a free on-site estimate with a written, line-item quote.

How We Run a Vanities, Tile & Fixtures Job in Antioch
Bathroom vanity and fixture work is a sequence job. Get the order wrong and you’re pulling a cabinet to fix plumbing you should have moved first. Here’s the real order we work in.
Stage 1: Demo and inspection (day 1 to day 2)
We pull the old vanity, disconnect the existing shutoff valves, lift the tile, and get the floor down to bare subfloor. That’s when we find out what’s actually under there – and in Antioch’s older flats, it’s often a wax ring that’s been seeping for years and soft spots around the toilet flange. We open the wall around the valve only after we’ve confirmed the shutoffs hold; if they don’t, adding a new valve at the main is a decision you approve before we go further.
Stage 2: Rough-in and prep (day 2 to day 4)
If you’re keeping plumbing in the same location, this is a day of valve, drain and supply work. If the vanity is moving, we cut and re-route supply lines and the drain, and add blocking in the wall to carry the new cabinet. Floor prep comes next: backer board or a bonded waterproof membrane system, and a moisture check before anything gets covered. The homeowner decision here is where the shower valve sits and whether the vanity is a single or double bowl – that has to be locked in before rough-in.
Stage 3: Tile setting (day 4 to day 8)
Wall tile and floor tile are set in separate passes so each has time to cure. Shower walls go first when we’re doing a surround, then floor tile, then grout after the manufacturer’s cure window. We tell every homeowner the same thing at the start: the tile work is not a day-two thing, and grout has to sit before fixtures go back on. This is the stage where material choice starts showing up in the schedule – large-format floor tile takes longer to set and level than a mosaic.
Stage 4: Vanity set and countertop (day 8 to day 11)
The cabinet gets set and shimmed level, then the countertop is templated (or fitted, if it’s a prefabricated top) and installed. Sink and faucet go on after the countertop is in place. We set the vanity so the toe kick and door reveal are plumb – a cabinet jammed against an out-of-square wall shows up every time the door swings.
Stage 5: Fixtures, caulk and final walkthrough (day 11 to day 14)
Toilet set, shower trim and head, towel bars, and the mirror all go in. Then a caulk and seal pass, a water test on every connection, and a walkthrough where we show you what we did and hand over warranty paperwork. The 730-Day Done Right Promise covers workmanship on every stage of this job – if something isn’t right, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Vanities, Tile & Fixtures
The choices that drive both the look and the number are these. We walk you through each one against your actual bathroom, not a catalog.
- Vanity cabinet grade. Stock cabinets run $300 – $900 installed. Semi-custom cabinetry in the KraftMaid range lets you dial in depth, door style and finish and typically adds $600 – $1,800. It buys you a cabinet sized to the room instead of a filler panel covering a gap.
- Countertop material. Laminate is the low end and shows wear at the sink edge. Quartz, including Cambria options, holds up against moisture and cleaning and is the choice most homeowners make when the vanity is the visual centerpiece.
- Tile format and material. Ceramic is the budget floor option. Porcelain in a large format (12×24 or larger) looks cleaner with fewer grout lines and handles the daily wear a family bathroom throws at it. Natural stone is a step up in cost and needs sealing.
- Waterproofing system. A bonded membrane or board system like Schluter behind the wet area is worth the line item. Skip it and you’re relying on grout and caulk to keep water out of the wall cavity.
- Fixtures and finish. Toto toilets and Grohe or Sterling valves, faucets and trim are the tiers we install most. The difference is in the cartridge and the finish warranty, not the chrome look on day one.
- Sink and layout. An undermount sink with a solid-surface or stone countertop is a cleaner look and a slightly higher fabrication cost than a drop-in. Double bowl over single bowl is a space call as much as a preference.
What Vanities, Tile & Fixtures Costs in Antioch, CA
A full vanity, tile and fixture replacement in Antioch runs $9,000 – $28,000. A narrower job – new vanity, new floor tile, refreshed fixtures, no shower work – lands near the bottom of that range. A full gut of the wet area with new waterproofing, large-format porcelain, quartz, and upgraded fixtures sits at the top. We quote the whole scope in writing before work starts, and the number you see is the number you pay.
Five things move the price:
- Scope size. Vanity and floor only versus vanity, floor, shower surround and fixtures changes the labor and material line substantially.
- Existing condition. Rotted subfloor, a failing toilet flange, or a shutoff that won’t hold adds demo and repair time. We only know this after the first day, and we bring it to you before we spend a dollar on it.
- Moving plumbing or electrical. Relocating a drain, adding a vanity outlet or moving a light is a real change to the rough-in scope. Keeping fixtures where they are saves money.
- Material grade. Porcelain and stone cost more than ceramic. Quartz costs more than laminate. A Toto toilet costs more than a builder-grade model. The material line is where a lot of the $9,000 – $28,000 spread lives.
- Permit scope. A straight cosmetic swap often doesn’t need a permit. Moving plumbing, electrical or structural framing does, and the permit and inspection are part of the job.
A written estimate covers demo, prep, waterproofing, setting materials, labor, installation and cleanup. It does not cover surprises behind the wall until we’ve seen them, or HOA finish requirements – and we flag both before we start rather than mid-job.

See the difference
Before
After
Before
After
Before
AfterWhat Antioch Homes Specifically Do to This Job
The housing stock on Antioch’s flats – 1950s to 1970s ranch tract homes and older downtown stock – is where this job gets interesting. Original single-pane windows and aging walls are common, and a bathroom that’s been in service for 50 years is likely to have a slow leak that’s been dampening the subfloor for a decade. We plan for that when we open the floor, not after. The building department here treats plumbing and electrical changes as permit work, so a vanity that moves its drain gets an inspection, and a cosmetic swap usually doesn’t.
The Delta setting matters too. Expansive clay soils and a high water table along the riverfront move seasonally, and a bathroom floor that was flat when it was built isn’t always flat now. We check for out-of-level floors before tile goes down, because a floor that’s off a half-inch telegraphs through a large-format tile. The hot, dry Delta summers and cool fog-influenced winters also mean the tile crew works around dust and cure windows rather than fighting them.
Homeowners in the downtown and river-adjacent blocks often pair a fixture replacement with a bigger exterior punch list – homeowners often pair this with Tile Roofing in Antioch when the roof is at the end of its life at the same time, or Specialty Roofing in Antioch for the trickier flashing around a bath vent stack. If your fixture and tile work is part of a full Bathroom Remodeling in Antioch, we scope it together.
We cover Antioch and the surrounding East Contra Costa and Delta towns, and our Bathroom Remodeling service handles the wider work when a vanity and tile job grows into a full remodel.
Serving Antioch, CA – Our Local Coverage Area
We serve Antioch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Antioch
Most vanities, tile and fixtures jobs in Antioch take 8 – 14 working days on site, with countertop fabrication adding a few days before stage 4. The schedule is driven by tile cure time and countertop lead time more than labor. Call (888) 419-3650 and we’ll put a realistic calendar on your written estimate.
Not always. A straight like-for-like swap – same vanity location, same fixtures, no drain or supply relocation – is typically cosmetic and doesn’t require a permit. Moving plumbing, adding an electrical circuit, or altering framing does. We tell you which side of that line your job is on before we start.
Yes. Most vanity, tile and fixture jobs stay in the same footprint, which keeps the job simpler and cheaper. We evaluate whether the existing drain and supply can carry the new fixture before we demo, and if moving something is the only way to get the layout right, we tell you and price it separately.
Vanities, tile and fixtures work in Antioch runs $9,000 – $28,000 depending on scope, tile and fixture grade, and what we find behind the wall. A vanity, floor tile and refresh sits near the low end; a full wet-area gut with new waterproofing sits at the top. Call (888) 419-3650 for an exact quote – estimates are free.
Every job is covered by our 730-Day Done Right Promise, and if it’s not done right, we make it right. Material warranties come from the manufacturer, and we hand over that paperwork at the walkthrough so there’s no fine print left to track down later.
Schedule Your Free Vanities, Tile & Fixtures Estimate
We’ll come to your Antioch home, measure the room, look at the existing plumbing and subfloor, and give you a written line-item estimate with 0% financing for 18 months and $1,000 off projects over $10,000. A live person answers (888) 419-3650 any hour, and on the call we’ll ask about room size, what you want replaced, and your timeline so we can bring the right samples and knowledge to the visit.
Written by the team at Groundwork Construction Co.