Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Rio Vista, CA: What It Takes and What It Costs
Replacing a vanity and re-tiling a bathroom floor and shower surround in Rio Vista typically runs $9,000 – $28,000 when the job involves new tile throughout, a new vanity, and updated fixtures, and most of these projects wrap in two to three weeks once materials are on site. The narrower version – new vanity, fixtures, and a floor tile replacement – usually lands closer to the $9,000 end. Call (888) 419-3650 to schedule a free on-site estimate and get a written line-item quote before anything gets ordered.

How We Run a Vanities, Tile & Fixtures Job, Stage by Stage
This isn’t a vague “we handle everything” job. Every stage has a decision point, and knowing when those decisions land keeps the project moving.
Stage 1: Site visit, measurements, and material selection (day 1, about 90 minutes)
We measure the vanity footprint, check the existing plumbing rough-in, and confirm the subfloor condition. You’ll decide on the vanity size and layout right here: single or double, freestanding or built-in, and whether you’re keeping the current plumbing location. Moving a drain line or supply adds both cost and time, so this call matters. We also narrow the tile direction and fixture finish at this visit so nothing stalls waiting on a decision later.
Stage 2: Demo and substrate prep (days 2 – 3)
Out comes the old vanity, the old fixtures, and the old tile. Then we check what’s underneath, and in Rio Vista that check matters more than it does inland. If the subfloor shows moisture or the old tile was set on a surface that’s flexing, we fix that before a single new tile goes down. Setting tile over a soft or wet substrate is how floors crack six months later. This is also when we flag anything behind the wall that needs attention.
Stage 3: Rough-in and waterproofing (days 3 – 4)
New valve trim, the vanity supply and drain connections, and the waterproofing layers around the shower and wet walls go in here. Waterproofing is the step nobody sees and everybody regrets skipping. We get it right, and if a permit and inspection apply to your scope, this is the stage that gets looked at.
Stage 4: Tile setting and grouting (days 5 – 7)
Floor tile goes down first, then the wall and shower tile, then grout and sealant after the thinset cures. You’ll want to have your grout color picked by day 4. On larger format tile or a pattern layout, expect this stage to stretch an extra day or two. Curing time isn’t negotiable, and rushing it shows up as cracked grout within a year.
Stage 5: Vanity set, fixtures, and final walkthrough (days 8 – 10)
The vanity gets set and leveled, the faucet, shower trim, and accessories go on, and we caulk every wet joint before handing it back. The walkthrough is where you sign off on the finished work, and any punch items get scheduled before we leave the driveway. Most jobs of this size finish inside ten working days once materials are in hand.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Be Making
Here’s where the money and the longevity both live. None of these are hard calls once you know the trade-off.
- Vanity material: Solid wood and plywood boxes hold up best in a bathroom’s humidity; particleboard boxes are cheaper but swell if water ever gets to them. A quartz or stone top resists staining better than cultured marble.
- Vanity size and layout: A 30-inch single is the budget standard; a 60-inch double means new plumbing for the second sink, which pushes the total up by roughly $1,000 – $2,500.
- Floor tile: Porcelain is the workhorse – dense, water-resistant, and priced moderately. Natural stone (travertine, slate) looks richer but needs sealing and costs more to install correctly.
- Shower wall tile: Large-format tile means fewer grout lines and easier cleaning but needs a flatter substrate. Smaller mosaic tile is more forgiving to install but carries more grout to maintain.
- Fixtures: A Kohler or comparable-grade faucet and valve set costs more upfront and lasts noticeably longer than builder-grade. We keep a curated set of trusted brands on hand so quality isn’t a guessing game.
- Tile layout: A simple grid is fastest and least expensive. A herringbone or offset pattern adds labor and material waste, often 15 – 20% more on the tile order.
Finishes should match the rest of the house. If you’re changing more than one room, this work often pairs naturally with Bathroom Remodeling as a broader scope.
What Vanities, Tile & Fixtures Costs in Rio Vista, CA
For a vanity and tile and fixtures package in Rio Vista, plan on $9,000 – $28,000, with the low end being a straightforward vanity and floor swap and the high end being full tile, a double vanity, and premium fixtures.

| Line item | Typical range |
|---|---|
| Bathroom Vanity Installation | $800 – $3,000 |
| Floor and shower tile (labor + material) | $3,500 – $12,000 |
| Fixture replacement (faucet, trim, accessories) | $600 – $2,500 |
| Plumbing relocation (if moving the vanity) | $1,000 – $2,500 |
| Subfloor or waterproofing repair | $800 – $3,500 |
What moves a job from $9,000 to the top of the range: the size of the tile field, whether plumbing has to move, the grade of tile and fixtures, and what we find under the old floor. A written estimate lists each of these and what’s not included – things like structural repair if the subfloor is failing beyond a certain point. Upfront pricing, no surprises: the number on the estimate is the number you pay. The Bathroom Remodeling in Rio Vista page covers the full scope if you want to expand.
See the difference
Before
After
Before
After
Before
AfterWhat Rio Vista Homes Specifically Do to This Job
Rio Vista sits at the confluence of the Sacramento River and the Delta, and that shapes everything about a tile job here. Expansive clay soils and a high water table mean moisture is a constant, and it shows up in bathrooms as soft subfloor, popped tile, and vanity boxes that swell at the base. In the older Delta-era homes – many on raised wood foundations with crawlspaces that flood during high-tide and storm events – we check under the floor before we tile above it. A floor that looks fine on top can be flexing over a damp crawlspace, and tile laid on that will crack.
In the newer subdivisions like Trilogy and Summerset, the homes are tract-built stucco on slab-on-grade. The tile itself holds up, but the grout and the seams around the shower are where the Delta’s wind-driven rain and winter fog find their way in. We detail the waterproofing and caulk those seams accordingly. And because the afternoon Delta breeze picks up reliably, we schedule the grout and sealant work for the morning so dust and debris don’t settle into a wet joint. ZIP code 94571 covers the work; if you’re outside it, our Rio Vista service-area page has the details on coverage. Homeowners doing exterior work at the same time often pair this with Tile Roofing in Rio Vista or Specialty Roofing in Rio Vista, since the same crew coordination saves a scheduling headache.
Serving Rio Vista, CA – Our Local Coverage Area
We serve Rio Vista and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions
Most jobs finish in about two to three weeks from the first site visit to the final walkthrough, with roughly eight to ten working days of actual construction. The rest is material lead time. If you pick tile and a vanity that are in stock, it moves faster. Call (888) 419-3650 for a timeline built around your specific scope.
Cosmetic tile and vanity swaps generally don’t need a permit; moving plumbing, electrical, or structural framing does. We tell you plainly at the estimate which parts of your job require one, pull what’s needed, and see it through inspection. Call (888) 419-3650 and we’ll confirm the permit scope for your address.
Yes, and keeping the vanity and fixtures in their current locations is the single biggest way to hold the cost down. Same footprint means no new supply or drain lines, which usually keeps the project under $15,000. Call (888) 419-3650 to walk through your layout and find out what stays and what moves.
A vanity, tile, and fixture package runs $9,000 – $28,000, with the range driven by tile field size, fixture grade, and whether plumbing relocates. A simple vanity and floor replacement sits at the bottom of that range. Call (888) 419-3650 for an exact written quote – estimates are free.
Every job we do is backed by the 730-Day Done Right Promise – if it’s not done right, we make it right, for two full years. That covers workmanship on tile setting, waterproofing, vanity install, and fixture connections. Call (888) 419-3650 to ask what the promise covers for your project.
Get a Free Estimate on Your Vanities, Tile & Fixtures in Rio Vista
Call (888) 419-3650 to schedule a free on-site estimate for your vanity, tile, and fixture work in Rio Vista. A live person answers around the clock, so you’re never stuck in voicemail. We’ll measure the space, check the subfloor and plumbing, and hand you a written line-item quote with the exact range before anything is ordered. No-hassle upfront pricing, and 0% financing for 18 months plus $1,000 off projects over $10,000 if you qualify.
Written by the team at Groundwork Construction Co.