Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Danville, CA: What It Costs and How Long It Takes
Walk-In Showers & Shower Remodeling in Danville, CA runs $4,500 – $12,000 for a curbless or low-threshold shower, and $3,000 – $8,500 for a straight shower replacement that keeps the existing footprint. A typical primary bath shower takes two to three weeks from demo to final inspection, and a full bath scope with walk-in work built in lands at $9,000 – $28,000. Call (888) 419-3650 and we’ll price your exact shower on site.

How we run a walk-in shower project, stage by stage
Stage 1: Measure, scope, and decide (1 visit, about 90 minutes)
We measure the existing pan, check the drain location and slope, and look at what’s behind the tile. You decide the big things here: shower size, curb versus curbless, tile direction, glass style. On Danville homes from the 1960s and 1970s, this is also where we confirm whether the waterproofing can be trusted under the old finish. It usually can’t.
Stage 2: Demo and drywall opening (2 to 4 days)
Tile comes out, the old pan comes out, and the wall cavity opens up. We’re looking for rot at the curb, mold at the bottom corners of the backer board, and any sign the old liner was nailed through low. That last problem is the single most common reason a shower fails, and it’s invisible until demo. Once the framing is exposed we can tell you whether the scope changes and by how much, in writing, before anyone lifts another tile.
Stage 3: Rough-in and pre-slope inspection (2 to 3 days)
The drain goes in, the pre-slope is packed, and any plumbing moved to fit a bench, a niche, or a lower curb gets done now. If we’re relocating the valve for a curbless entry or a linear drain, the rough plumbing happens at this stage. The rough inspection happens before the waterproofing goes down, which is the right order and the only order.
Stage 4: Waterproofing, tile, and glass template (7 to 10 days)
A bonded membrane goes over the pan and walls and gets a flood test. Then tile, then grout, then cure time. You pick tile in Stage 1, but you’ll confirm grout color here, and that’s the last decision from you until final walkthrough. Glass gets templated after tile is set and usually arrives 5 to 10 business days later, so plan on that gap.
Stage 5: Glass, trim, final inspection, and clean (2 days plus the glass lead time)
Glass goes in, the shower valve and trim get set, and we run the final inspection. We test the drain with a full pan of water and check the slope holds. Then the site gets cleaned and you get the walkthrough. If it’s part of a Bathroom Remodeling in Danville scope, the shower usually goes in first so the rest of the room can be finished around it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Nobody picks everything. Most Danville homeowners lock in three or four of these and let the rest default.
- Curbless vs. low-curb pan. Curbless costs $800 – $2,000 more because the floor has to be recessed or the entire room raised. Worth it if you’re planning to age in place or the shower sits over a joist bay the plumber can work with.
- Tile material. Porcelain runs $6 – $15/sq ft and holds up to hard water and daily scrubbing. Natural stone (marble, travertine) runs $15 – $45/sq ft installed and looks better but needs sealing yearly in a hot inland climate like Danville’s.
- Pan: tiled mud bed vs. prefab. A tiled mud bed is $1,500 – $3,500 and gives you a custom size. Prefab acrylic or composite pans are $400 – $1,200 and arrive in one piece, which matters if the room is tight to get material into.
- Glass. Frameless 3/8″ glass runs $1,200 – $3,000 installed. Semi-frameless saves $400 – $900 but collects mineral buildup on the frame edges faster.
- Drain style. A center drain is standard. A linear drain runs $400 – $1,200 extra and lets you slope the floor a single direction, which is why it pairs so often with curbless.
- Fixtures. Kohler and comparable brands sit in the middle of the market. A thermostatic valve add $300 – $800 over a standard pressure-balance valve and keeps water temperature steady when someone runs a sink.
- Bench and niche. Built-in bench $500 – $1,400. Niche $150 – $400. Skimp on the bench waterproofing and you’ll pay for it in five years.
What Walk-In Showers & Shower Remodeling costs in Danville, CA
Walk-in showers in Danville price from $4,500 to $12,000 for a standalone walk-in project, and shower replacement in an existing footprint runs $3,000 to $8,500. If the shower is one piece of a larger Bathroom Remodeling scope, the whole room typically comes in between $9,000 and $28,000. These are installed numbers with glass, tile, waterproofing, and inspection included.
What pushes a job to the top of that range:
- Size and layout. A 36″ x 60″ alcove shower sits at the low end. A 5′ x 5′ walk-in with a bench and a linear drain goes to the top.
- Existing condition. Rot at the curb, failed backer board, or a properly built old mud pan that has to come out anyway adds demolition and framing dollars.
- Moving plumbing. Relocating the valve, drain, or supply lines to suit a new layout runs $600 – $2,400. Keeping the drain where it is saves real money.
- Material grade. Porcelain and prefab pan versus marble and a custom mud bed is roughly a $4,000 gap on the same footprint.
- Permit scope. A shower that reuses the existing drain and valve needs less inspection than one that relocates plumbing. Either way the permit has to be pulled.
What we include in a written estimate: demo and haul-off, framing repairs we can see, waterproofing membrane and flood test, tile and setting materials, fixtures we supply, glass, permit cost, and inspection coordination. What’s typically not included: hidden rot behind tile beyond what’s visible at demo, and upgraded tile or stone above the allowance you choose. We put the allowance in the number so you know what you’re picking from, not to surprise you later. Upfront pricing, no change orders you didn’t approve.

See the difference
Before
After
Before
After
Before
AfterWhat Danville homes specifically do to this job
Danville is almost fully built out, which means nearly every shower project here is a remodel inside a home someone plans to keep. The housing stock is dominated by 1960s through 1990s custom and semi-custom single-family homes, and the showers in those houses have had three or four decades of use. What we open up most often is the same pattern: a tear in the old vapor barrier at the curb corner, soft framing just above it, and a pan that was built with a liner not properly sloped. That’s not a tile problem. It’s a waterproofing problem that was baked in the day the shower went in.
The 94526 core and 94506 hillside side fail a little differently. In the flat, mature-landscaped streets of the Danville core, showers tend to be alcove installs and the work is straightforward once the old pan is out. Up on the Blackhawk and Tassajara side of 94506, we run into larger homes with master showers that are big enough to need more structural thought, and moisture intrusion gets noticed later because the room is rarely used the same way. Either way, we pull a permit and pass inspection. If you’re planning a larger remodel alongside this, the shower is a natural first move, and homeowners often pair exterior upgrades with the project too, like Roof Replacement & Installation in Danville or Metal Roofing in Danville while the dust is up.
We work Danville regularly, from Camino Tassajara to the streets off Hartz Avenue, and we know what the inspection process expects here.
Serving Danville, CA – Our Local Coverage Area
We serve Danville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Walk-In Showers & Shower Remodeling in Danville
Most walk-in shower projects take two to three weeks of active work, plus a 5 to 10 business day gap while glass is fabricated. A shower replacement that keeps the existing footprint runs 7 to 10 working days. Call (888) 419-3650 for a schedule based on your specific room.
Yes, in nearly every case you do, and we pull it for you. Any shower that involves waterproofing membrane, plumbing changes, or a new pan requires a permit and inspection, and the flood test on the pan is part of what gets inspected. We handle the permit application and the inspection scheduling so you don’t have to.
Often, yes. If the existing drain is centered and the valve is on the correct wall for your new layout, most walk-in conversions stay within the original rough-in. Relocating the drain or valve is where costs climb, so we check first and tell you honestly whether the layout you want works with what’s there. Call (888) 419-3650 and we’ll walk you through it.
A standalone walk-in shower runs $4,500 – $12,000, a shower replacement runs $3,000 – $8,500, and a walk-in shower inside a full bath remodel lands in the $9,000 – $28,000 range. The variables are square footage, whether the pan is tiled or prefab, glass grade, and whether plumbing moves. Call (888) 419-3650 for an exact quote on your shower.
Every walk-in shower we install is covered by our 730-Day Done Right Promise. That means two full years on workmanship, including waterproofing, so if there’s a leak or a failure in the membrane, we come back and make it right. Our technicians have up to 12 years of experience, and the work is backed in writing.
Get a free estimate on your Danville walk-in shower
Call (888) 419-3650 to schedule a free on-site estimate for Walk-In Showers & Shower Remodeling in Danville. We’ll measure the space, check what’s behind the tile, and give you a written line-item quote with the permit and inspection costs built in. Live person answers every call, day or night. We’re currently running $1,000 off projects over $10,000 and 0% financing for 18 months.
Written by the team at Groundwork Construction Co.