Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in Danville, CA: What It Costs and How Long It Takes
A wood fence in Danville, CA typically runs $3,500 to $9,000, with most standard lot-line jobs landing near $5,000 to $6,800. Plan on two to four working days on site for a typical run of 150 to 200 linear feet, plus a short wait for permit review if your run touches a corner, a slope, or an easement. Call (888) 419-3650 and we’ll walk your property line, measure the run, and put real numbers in front of you before anything is ordered.

How a Wood Fence Goes In, Start to Finish
Wood fencing is one of those jobs where the visible part – the boards – is roughly a third of the work. The rest is layout, digging, setting posts and getting the grade right. Here’s the actual sequence we run on a Danville wood fence project.
Stage 1: Site walk and line layout (half a day)
We start by pulling the plat map and walking the lot with you to confirm where the property line actually sits, because Danville lots are large and the line rarely matches the old fence. This is where you decide the fence height, whether it runs straight or steps with the grade, and where gates land. On hillside lots in the 94506 side, step placement is a design decision, not an afterthought, since a straight top rail on a 3-foot grade change looks wrong from every angle.
Stage 2: Permit and HOA submittal (1 to 3 weeks, depending on scope)
This is the stage homeowners underestimate. Anything over 6 feet, anything on a corner lot, and anything in a hillside or fire-zone parcel usually means a submittal to the town, and many Danville neighborhoods also carry CC&Rs that specify fence height, material and color. You decide the design here; we handle the drawing, the submittal and the inspection scheduling. If your project is part of a full Fence Installation in Danville scope that includes multiple fence types, we sequence the permits together so you’re not paying for two separate plan reviews.
Stage 3: Demo and post setting (day 1 into day 2)
Old fence comes out, posts get set in concrete, and holes get dug to depth. On a 200-foot run that’s typically a full day of demo and a full day of setting. Post spacing, footing depth and whether we auger or hand-dig depends on what’s underground. Danville’s established lots often have irrigation lines, old root systems and occasionally a private utility line running right along the fence line, and finding one mid-dig is why we call for a utility locate before day one.
Stage 4: Framing and boards (day 3 into day 4)
Rails, pickets and top cap go up once the concrete has cured. This is the part you watch happen and the part where material grade shows. A 200-foot run of cedar pickets and a 200-foot run of pressure-treated pine go up in the same time but look and age completely differently. You’ll confirm the board profile and finish before this stage starts.
Stage 5: Gates, hardware and final inspection (half a day)
Gate swings, latches and post caps get finished, and we walk the run with you board by board before calling for the inspection. Anything loose, twisted or out of line gets corrected on the spot. Every wood fence we build is covered by our 730-Day Done Right Promise – if a post shifts, a board cups or a gate sags inside that window, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on a Danville Wood Fence
Most of the decisions that affect both the look and the long-term cost happen before a single post goes in. Here’s what actually matters.
- Species and grade. Western red cedar is the premium choice – it resists rot and insects naturally, finishes beautifully and suits the Mediterranean and ranch architecture common through Danville. It costs more up front. Pressure-treated pine is the budget option and holds up fine when it’s properly sealed, but it moves and checks more in our summer heat. Redwood sits between the two.
- Board style. Dog-ear, flat-top, board-on-board and shadowbox all change the privacy level and the price. Board-on-board and shadowbox use more material and cost noticeably more per foot, but they hold up better to wind and give a cleaner look from both sides.
- Post and footing spec. Posts set in concrete with a gravel base drain better than posts buried bare, and that matters on the heavy clay pockets we run into around 94526. It’s a small line item that extends the life of the fence by years.
- Height and finish. 6 feet is the standard residential height. Anything taller needs a permit conversation. Stain versus natural weathering is a look decision, but a penetrating stain also slows the sun damage that inland Tri-Valley summers deal out.
- Gates and hardware. A single walk gate and a double drive gate are the usual pair. Stainless or coated hinges last dramatically longer than plain steel in this climate.
What a Wood Fence Costs in Danville, CA
Expect $3,500 to $9,000 for a residential wood fence in Danville. The low end is a shorter pressure-treated run on flat ground; the high end is a long cedar run with board-on-board construction, grade changes and a drive gate.
- Length of run: the single biggest driver. Price scales close to linear with linear footage.
- Material grade: cedar and redwood land at the top; pressure-treated pine at the bottom. The spread on a 200-foot run is several thousand dollars.
- Site conditions: slope, rock, roots and old concrete footings all add labor. Hillside lots in the 94506 area are the usual culprit.
- Gates and hardware: each gate is its own build.
- Permit and design review: where the town or an HOA requires submittal, that’s real cost and real time.
A written estimate from us breaks out posts, rails, boards, gates, hardware, concrete, demo and permit fees as separate lines. What typically isn’t included: removing yard debris beyond the old fence itself, landscape repair around the fence line, and painting or staining unless you ask for it. Upfront pricing means the number on the estimate is the number you pay – no change orders once work starts.

See the difference
Before
After
Before
After
Before
AfterWhat Danville Homes Specifically Do to a Wood Fence Job
Danville is a built-out, high-value Tri-Valley suburb, and almost every fence project here is a replacement or upgrade on an existing lot rather than new construction on a fresh parcel. That changes the job. We’re almost always tying a new run into mature landscaping, an established grade and a neighbor’s existing fence line, on lots that were subdivided back when the 1960s through 1990s custom and semi-custom homes went in. Property line disputes get settled with a plat map, not a guess. The flat, established 94526 core is where most of our straightforward replacement work sits, while the hillside parcels up toward Blackhawk and Tassajara carry a different set of questions – fire-resistant construction, defensible space, and access for equipment on a sloped lot – and those two areas genuinely need two different approaches.
Climate works against wood here too. Danville’s inland microclimate brings intense summer sun and long dry stretches, which fade and check exposed boards faster than in the fog-cooled cities closer to the bay. A penetrating stain every few years is the difference between a 15-year fence and a 10-year one.
Serving Danville, CA – Our Local Coverage Area
We serve Danville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Wood Fence in Danville
Two to four working days on site for a typical residential run, plus one to three weeks for permit review if your project needs it. The build itself moves fast; the paperwork and cure time are what stretch the calendar. Call (888) 419-3650 and we’ll give you a realistic start and finish date, not a range.
Often yes – anything over 6 feet, anything on a corner lot, and anything in a hillside or fire-zone parcel usually triggers a permit. The town’s rules and your neighborhood’s CC&Rs both apply. We check both before we order material and we handle the submittal and the inspection. Call us for a free estimate and we’ll tell you up front whether your run needs one.
It can, so we plan for it. We call for a utility locate before digging, mark irrigation runs with you on the site walk, and route posts around anything we can’t move. Some landscape repair after demo is normal – a new fence line almost always means a few plants get dug out.
$3,500 to $9,000 for most residential jobs, driven mainly by run length, species of wood and whether the site has grade changes. A cedar board-on-board run with a drive gate sits at the top; a shorter pressure-treated run on flat ground sits at the bottom. Call (888) 419-3650 for an exact quote – estimates are free.
Our 730-Day Done Right Promise covers workmanship for two full years – if a post shifts, a board cups or a gate sags, we come back and fix it. The wood itself carries the manufacturer’s treatment warranty, which depends on the species and grade you choose. Homeowners who want the driveway redone at the same time often pair this with Paver Driveways in Danville or Concrete Driveways & Concrete Work in Danville so the whole front yard gets done in one stretch of mess.
If you’re weighing a wood fence against a different material, or wondering how it fits into a larger yard project, our Fence Installation service covers the full range, and you can see everything we handle across Danville from the service-area page.
Get a Free Wood Fence Estimate in Danville
Call (888) 419-3650 to schedule a free on-site estimate for your wood fence in Danville. A live person answers, day or night, and we’ll set a time that works. On the visit we walk the line with you, measure the run, check grade and utilities, and leave you with a written line-item quote – materials, labor and permit fees separated – usually within a day or two of the walk. No pressure and no obligation.
Written by the team at Groundwork Construction Co.