Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in Discovery Bay, CA: What It Costs and How It Gets Built
A wood fence in Discovery Bay typically runs $3,500 to $9,000 for a standard residential lot, with most jobs landing near the middle of that range, and a straightforward run is usually completed in two to four days. The price reflects board grade, post depth, gate count, and how much of the fence sits over canal-side fill soil. Call (888) 419-3650 for a free on-site estimate and a written line-item quote before any work begins.

How a Wood Fence Goes In, Stage by Stage
We don’t hand you a start date and disappear. Here’s the actual sequence, so you know what to expect on day one, day two, and the day we pull off site.
Stage 1: Site walk and layout (day one, about 2 hours)
We walk the property line with you, confirm where the fence meets your neighbor’s and where it meets the water, and mark post locations with paint or flags. This is where you decide fence height, board face-side (which neighbor sees the smooth side), and gate swing directions. On canal-front lots, this is also where we check rear-yard access – if equipment can’t get around the side of the house, we plan a manual carry or a barge approach before the first post goes in.
Stage 2: Demo and post setting (day one and two)
Old fencing comes down first. Posts get set in concrete and footed below the frost-free depth your local inspector expects; on the fill soils common to the Delta, we sometimes oversize the footing so the post doesn’t walk as the ground moves. Post setting is the slowest part of the job because the concrete has to cure before we hang anything on it. That’s a real 24 to 48 hours, not a marketing number.
Stage 3: Rails and framing (day two or three, 3 to 5 hours)
Top and bottom rails get fastened to posted hardware, and we true the line before any pickets go up. This is the step that determines whether your fence looks straight for the next fifteen years. Mid-run bracing on long spans prevents sag.
Stage 4: Boards and gates (day three, 4 to 6 hours)
Boards go up panel by panel. Gates get framed and hung with galvanized hardware and a brace-adjusted diagonal so the gate doesn’t sag into the ground in year two. This is the stage where you sign off on the fit and finish.
Stage 5: Cleanup and walkthrough (same day)
We haul off all old material, sweep, and walk the finished fence with you to confirm nothing got missed. Your written workmanship coverage starts here.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
Wood fence is not one product. What you pick here drives both the price and how many years you get out of it.
- Cedar vs. pressure-treated pine: Cedar is naturally rot- and insect-resistant and finishes beautifully; it costs more up front but often lasts a decade longer. Pressure-treated pine is the budget pick and holds up fine with annual sealing, but it contracts and swells hard in Delta weather and needs restaining more often.
- Board grade: #1 grade boards are straight and knot-free; #2 grade has knots and wane but costs meaningfully less. For a fence that faces your neighbor’s yard, #2 usually makes sense. For the side facing your patio, #1 is worth the difference.
- Height: Standard is 6 feet. Privacy runs often bump to 7 or 8 feet where the local code allows it, and taller fences cost more in material and definitely in wind loading – a taller solid fence is a sail, and in Discovery Bay’s summer Delta breezes, that matters.
- Board style: Dog-ear, flat-top, and cap-and-trim all sit at different price points. Cap-and-trim looks best but costs 10-20% more per linear foot.
- Finish: Clear sealer, semi-transparent stain, or solid-color stain. Solid stain lasts longer but needs more prep to apply evenly. Semi-transparent shows grain and fades gracefully.
- Gates: Single walk-through, double drive gate, or a custom arch gate. Each gate adds roughly $300 to $600 for materials and hardware.
What a Wood Fence Costs in Discovery Bay, CA
Most full-property wood fence jobs in Discovery Bay land between $3,500 and $9,000. The low end is a short run with pressure-treated pine and basic gates. The high end is a taller cedar build over difficult ground with multiple gates and a mid-run transition to a waterfront seawall.
What pushes a job from the bottom of that range to the top:

- Linear footage. A typical single-family lot has 150 to 250 feet of fencing. Every extra 50 feet adds roughly $700 to $1,400.
- Post footing conditions. Delta fill soil and waterfront lots can require deeper or oversized footings. That adds labor and concrete.
- Distance from the street. If equipment can’t get around to the rear of a canal-front lot, everything gets carried by hand. On water-access-only properties, expect $500 to $1,200 of labor just for haul.
- Existing fence condition. Rotten posts buried in concrete take longer to pull than ones that come out clean.
- Gates and premium boards. Multiple gates plus #1 cedar can add $800 to $1,500 on its own.
Your written estimate includes demo, materials, permit fees where required, labor, and cleanup. It excludes sprinkler repair if we hit irrigation lines we weren’t told about, landscaping restoration on top of standard cleanup, and any drainage correction found under the fence line. We flag those in the walkthrough before anything starts so there are no surprise change orders mid-build.
See the difference
Before
After
Before
After
Before
AfterWhat Discovery Bay Homes Specifically Do to This Job
Discovery Bay is not an inland suburb, and a wood fence here has to survive things it wouldn’t on a Brentwood cul-de-sac. Most homes sit on man-made canals and levee-backed waterfront lots built over fill soil and Delta peat, and that ground moves. Posts that would sit dead-straight in clay can walk, tilt, or pop their concrete after a wet winter. We see it on home after home along the canal-fronts off Riverlake Road and the dockside streets that feed into the marina, and it’s why we spend more on footing depth here than we would in Oakley or Livermore.
The other pressure is wind. Strong Delta breezes rip through Discovery Bay on summer afternoons, and a solid six-foot wood fence acts like a sail. Fences fail at the post first, not the boards. We set posts a little deeper and brace taller runs more aggressively as a matter of routine. Winter storms finish the job – wind-driven water from the Delta tacks across the rear of waterfront lots, and any fence close to a slough or seawall sees standing water at the base. That’s why we recommend pressure-treated or cedar over anything exotic near the water, and why we don’t set bottom rails flush to grade.
Housing stock shapes the work too. Discovery Bay is dominated by 1980s to 2000s custom and semi-custom homes, most in Mediterranean stucco with tile roofs, and many with original fencing that’s now twenty to forty years old. A lot of what we’re replacing was cedar or pressure-treated pine installed when the home was built. HOA rules vary block to block, and a handful of waterfront communities have fence color and height restrictions worth checking before you pick a stain. Permits through Contra Costa County are typically pulled for fences over a certain height or when the fence runs along a property line – we handle the filing and inspection schedule as part of the written quote so you’re not chasing it down.
Serving Discovery Bay, CA – Our Local Coverage Area
We serve Discovery Bay and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Wood Fence in Discovery Bay
Most residential wood fence builds are completed in two to four working days, with the post-cure window baked into that timeline. Longer runs, multiple gates, or barge-access jobs on canal-front lots can stretch to five or six days. Call (888) 419-3650 to get a firm timeline on your property.
Contra Costa County generally requires a permit for fences above a certain height or within setback requirements from a property line, and waterfront lots often have additional rules tied to levee access. We file the permit, schedule the inspection, and handle the paperwork as part of the estimate. Call (888) 419-3650 and we’ll tell you exactly what your lot needs.
Most full-lot wood fence jobs in Discovery Bay run $3,500 to $9,000, with the final number driven by linear footage, board grade, gate count, and how much of the fence sits over canal-side fill soil. Call (888) 419-3650 for a written itemized estimate – free, no pressure.
Wind is the number one cause of wood fence failure in Discovery Bay, and it usually shows up at the posts, not the boards. We set posts deeper, brace taller runs more aggressively, and use pressure-treated or cedar near the water so wind-driven storm surge doesn’t rot the wood at grade. Call (888) 419-3650 if your current fence is leaning or its posts feel loose.
Every wood fence we build is covered by our 730-Day Done Right Promise – if a post leans, a gate sags, or a board fails well before it should, we come back and make it right. That’s a workmanship guarantee, and it sits on top of the manufacturer warranty on the boards and hardware. Call (888) 419-3650 to ask about the coverage on your specific build.
Get Your Free Wood Fence Estimate in Discovery Bay
A wood fence is a two-to-four day project that sets your property line for the next fifteen years, so get the number right before any post gets set. Call (888) 419-3650 and a live person will pick up, take your address and fence length, and schedule a free on-site estimate. We’ll walk the line with you, talk through board grade and gate options, and hand you a written itemized quote with the exact scope and price – no change-order games, no surprises. If your project also touches the driveway, homeowners often pair this with Paver Driveways in Discovery Bay or Concrete Driveways & Concrete Work in Discovery Bay; both are part of what we do across Discovery Bay. If you’re still mapping the whole backyard, this job sits under our broader Fence Installation service and can be planned as part of a Fence Installation in Discovery Bay project. Our technicians have up to 12 years of experience building fences that hold up to the Delta.
Written by the team at Groundwork Construction Co.