Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Brentwood, CA: Scope, Timeline and Cost
Vanities, tile and fixtures work in Brentwood typically runs $9,000 – $28,000 when it’s part of a larger bathroom renovation, and $5,000 – $12,000 when you’re only replacing the vanity, re-tiling the floor and shower walls, and updating the hardware. Most of these jobs take 2 – 3 weeks of on-site work. Call (888) 419-3650 for a free on-site estimate. Our technicians have up to 12 years of experience, and we back the finish work with our 730-Day Done Right Promise.

How We Handle Vanities, Tile & Fixtures – Stage by Stage
This isn’t a “crew shows up and figures it out” job. Vanities, tile and fixtures need a sequence, because the tile plane, the vanity footprint and the rough-in all have to agree before anything gets set. Here’s the real order of operations.
Stage 1: Measure, templating and decisions (days 1 – 2)
We measure the vanity wall, check the existing drain and supply locations, and confirm the floor slope. You’ll decide vanity width and depth, sink type (undermount or vessel), tile layout for the floor and walls, and grout color. These choices lock the rest of the schedule, so we don’t start demo until they’re signed off.
Stage 2: Demo and prep (days 3 – 4)
We pull the old vanity, tile and fixtures and inspect what’s underneath. In a lot of Brentwood homes we find the subfloor needs a patch, or the drywall behind the tile needs replacing. We cement board over wet areas, waterproof the shower walls, and set the floor substrate flat, because a wavy floor will telegraph right through large-format tile.
Stage 3: Plumbing and electrical rough-in (day 4)
If the new vanity moves the sink position, or you’re adding outlets or a lighted mirror, this is the day. Rough-in gets inspected before anything gets covered up. If you’re staying in the same footprint and keeping the same sink location, we often skip this step entirely – it’s the single biggest variable in schedule and cost.
Stage 4: Tile setting and vanity install (days 5 – 9)
Floor tile goes down first, then shower walls, then grout. The vanity cabinet gets leveled and anchored to the wall, the countertop is cut and set, the sink and faucet go in, and the mirror and light go up. We keep a checklist of the small stuff – towel bars, toilet paper holder, drain trim – because those are the details that separate a finished job from a nearly finished one.
Stage 5: Final walkthrough and punch list (days 10 – 14)
We walk the room with you, test the drains and supply lines, and fix anything on your punch list before we call the job complete. You get a written record of everything we installed, and our 730-Day Done Right Promise covers the workmanship.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the decisions on this job come down to four buckets. Here’s the honest trade-off on each.
- Vanity cabinet: Plywood box with a painted or stained finish is the standard and holds up well in a bathroom. MDF and particleboard are cheaper and common in production homes, but they swell if water sits on them. A floating vanity saves floor space and looks modern, but it needs solid blocking in the wall, which can add work.
- Countertop: Quartz is the go-to in Brentwood because it’s non-porous and doesn’t stain – a real advantage with our hard water. Granite is durable but needs sealing. Cultured marble is the budget pick and looks it up close.
- Tile: Porcelain is the workhorse – dense, waterproof, and it handles a hot, arid climate without much fuss. Ceramic is cheaper but softer. Large-format tile (24″x24″ and up) means fewer grout lines and a cleaner look; it costs more to set because the floor has to be flat, and small mosaic is the opposite – more grout, more forgiving on an uneven floor.
- Fixtures: Kohler and similar brands are worth the money on the faucet and shower valve, because those are the parts that fail first. Big-box house brands cost less and show their age faster. A pressure-balance valve is standard now; a thermostatic valve costs more and gives you finer temperature control.
If you’re also weighing a larger scope, this work sits naturally inside our Bathroom Remodeling service, and a lot of Brentwood homeowners pair it with exterior work – our Tile Roofing in Brentwood and Specialty Roofing in Brentwood both come up when the house is getting a broader refresh.
What Vanities, Tile & Fixtures Costs in Brentwood, CA
Plan on $9,000 – $28,000 for vanities, tile and fixtures in Brentwood. That’s the range we see across the full scope of a bathroom’s hard finishes and cabinet work. Here’s where the number actually moves:

| Line item | Typical range |
|---|---|
| Vanity installation (cabinet + top + sink) | $800 – $3,000 |
| Shower replacement (tile + fixtures) | $3,000 – $8,500 |
| Walk-in shower installation | $4,500 – $12,000 |
| Full-scope vanities, tile & fixtures | $9,000 – $28,000 |
What pushes a job to the low end: keeping the sink and plumbing in place, standard-size vanity, porcelain floor tile only, stock fixtures. What pushes it high: moving the drain, adding a second sink, full wall tile in the shower, large-format tile that needs a perfectly flat substrate, or a floating vanity that needs wall blocking.
A written estimate from us lists every line item – material, labor, permit if one’s needed – so the number you see is the number you pay. Upfront pricing, no surprises, and 0% financing for 18 months if you’d rather spread the cost. Projects over $10,000 also get $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat Brentwood Homes Specifically Do to This Job
Brentwood’s housing stock is overwhelmingly new – big tracts of 1990s-to-2020s Mediterranean and Spanish-style stucco homes, plus custom ranchettes on multi-acre lots, with only a small core of older downtown bungalows. That shapes this job in ways it wouldn’t in an older Bay Area city. In homes built in the last 25 years, we’re usually working with drywall and existing tile over cement board, which means demo is cleaner and grade-level plumbing is easier to access. In the custom homes on larger lots, we regularly see oversized bathrooms that need two vanities and tile quantities that push the job toward the top of the range. The hot, dry inland climate – summer highs often over 100°F – is hard on grout and caulk, so we use flexible sealant at every change of plane rather than rigid grout, because rigid grout cracks when the house moves with the clay soil. If a job involves reshaping the floor or adding a partition, it falls under a remodel permit and needs inspection, same as anywhere in 94513. Replacing a vanity or re-tiling in the same footprint usually doesn’t. Our team covers all of Brentwood, from Deer Ridge out to the custom lots east of town.
Serving Brentwood, CA – Our Local Coverage Area
We serve Brentwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Brentwood
Most jobs run 2 – 3 weeks of on-site work, with the first two days spent on measurement and material selection. Tile setting and grout cure time drive the schedule. Call (888) 419-3650 for a timeline specific to your room.
Replacing a vanity, tile, or fixtures in the same location usually doesn’t need a permit. Moving plumbing, adding electrical, or changing the room’s layout does – and those changes get inspected. We’ll tell you exactly which side of the line your job falls on before work starts.
Yes – and that’s the cheapest way to do it. Keeping the sink, drain and supply lines where they are, and staying within the existing wall layout, keeps a vanities and tile job at the low end of the range. We’ll show you what’s possible without relocating anything.
Between $9,000 and $28,000 for the full scope, depending on size, material grade and whether plumbing moves. Call (888) 419-3650 for an exact quote – estimates are free.
Our 730-Day Done Right Promise covers the workmanship for two years – if it’s not done right, we make it right. That’s one of the longest guarantees in the residential construction space, and it’s in writing. Call (888) 419-3650 to schedule your free estimate.
Get a Free Estimate for Vanities, Tile & Fixtures in Brentwood
Call (888) 419-3650 and a live person picks up, any hour. We’ll set a time to walk your bathroom, measure the space, and talk through vanity size, tile options and fixture brands so you know exactly what the job costs before anything is signed. Free estimate, written line-item pricing, and a crew that shows up background-checked and in uniform. Our team covers Brentwood and the surrounding area – starting with the estimate costs you nothing.
Written by the team at Groundwork Construction Co.