Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Livermore: What the Job Really Costs and How It Runs
Replacing a bathroom vanity, tile, and fixtures in Livermore runs $9,000 – $28,000 for a full tear-out and rebuild, or $800 – $3,000 if you’re only swapping the vanity and keeping the footprint. Most jobs like this take one to three weeks once materials land, and the biggest swing factor is how much tile you’re setting and whether plumbing or electrical has to move. Call (888) 419-3650 to schedule a free on-site estimate and get a written line-item quote.

We’re Groundwork Construction Co., and this page covers one slice of the work: the cabinetry, surface material, and fixtures that finish a bathroom. If the project runs wider than that, our Bathroom Remodeling service handles the full scope, and you’ll want the Bathroom Remodeling in Livermore page for planning a gut renovation. Here we stay narrow on vanities, tile, and fixtures because that’s where the money and the detail live.
How We Run a Vanities, Tile & Fixtures Job, Stage by Stage
When we work Vanities, Tile & Fixtures in Livermore, the sequence matters as much as the material. Here’s the real order of operations, with durations we actually plan around.
Stage 1: Measure, template, and lock the spec (week before demo)
A field measure confirms wall-to-wall dimensions, floor flatness, drain location, and where the vanity will hit the existing plumbing stub-outs. You decide the vanity size, countertop material, tile layout (running bond, stacked, or herringbone), and fixture finish at this point. Lead time on a KraftMaid or semi-custom cabinet runs two to four weeks; stock vanities can be on-site in days. Getting the spec signed off before demo starts is how we avoid mid-job change orders.
Stage 2: Demo and rough-in (days 1 – 2)
We pull the old vanity, tile, and fixtures down to the studs where needed. If the drain or supply lines have to move for a larger vanity or a new sink position, the plumber roughs it in now. Any electrical for a vanity sconce or GFCI receptacle gets run before the walls close. Older Livermore homes sometimes hide surprises here, and we photograph the open walls so you see what we found.
Stage 3: Backer board and waterproofing (day 3)
Tub surrounds and shower walls get cement or foam backer board followed by a liquid-applied or sheet membrane. Floor tile goes over a flat, primed substrate. This stage sets up the tile to last, and we don’t rush it. A membrane done wrong shows up as a failed grout line two years later.
Stage 4: Tile setting and vanity install (days 4 – 8)
Floor tile goes down first, then wall tile, then grout. The vanity cabinet sets after floor tile cures, the countertop templates and drops in, and we set the sink, faucet, shower valve, and trim. Small-format mosaic takes longer to set than large-format porcelain; a herringbone shower wall can add a full day over a straight stack.
Stage 5: Final plumbing, caulk, and walkthrough (days 9 – 10)
Final hookup, caulk lines, a full water test, and a walkthrough where we check every valve and drain with you standing there. You sign off against the written scope. Any punch item gets scheduled before we call the job done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Vanities, Tile & Fixtures
The selections are where your budget moves most. Here’s the honest trade-off on each major pick.

- Vanity cabinet: Stock cabinets are cheapest and fastest but limited to standard sizes, which can leave dead space at a wall. Semi-custom (KraftMaid and similar) fits odd dimensions and lets you pick the door style, finish, and drawer layout; it adds lead time and cost but rarely looks built-in-cheap.
- Countertop material: Quartz is the workhorse for a bathroom vanity: non-porous, no sealing, and it holds up to daily use. Marble is beautiful and softer; it stains and etches, so it suits a guest bath better than a hard-used main bath. Engineered stone and solid surface sit between on both price and durability.
- Floor tile: Porcelain is the standard for a reason, with low water absorption and easy care. Natural stone (travertine, slate) brings warmth and character but wants sealing and tolerates less flex in the subfloor. Large-format tiles read bigger and cleaner in a small room; they need a very flat floor.
- Wall tile and shower surround: Ceramic is budget-friendlier, porcelain is more durable, and glass mosaic adds a decorative band at a premium. Full-height wall tile costs more in material and labor than a half-wall wainscot but means no drywall to repaint.
- Fixtures and finish: A Kohler or Moen valve and trim set costs more than builder-grade but the cartridge and finish last. Matte black and brushed nickel finishes now cost little more than chrome. Cheap trim is where leaks and flaking show up first.
What Vanities, Tile & Fixtures Costs in Livermore, CA
The full range for this work in Livermore is $9,000 – $28,000, with a vanity-only swap landing at $800 – $3,000. Five variables push a job toward one end or the other.
- Square footage and tile area: A small bath with a 5-foot tub surround and 40 square feet of floor is a very different job from a primary bath with a 6-foot shower, floor-to-ceiling tile, and 100 square feet of floor.
- Plumbing and electrical relocation: Moving a drain for a larger vanity or adding a sconce circuit adds real labor and inspection scope. Keeping the footprint cuts cost.
- Material grade: Stock vanity and ceramic tile sit at the low end; semi-custom cabinetry, quartz, and porcelain at the high end.
- Existing condition: Rotted subfloor, a prior failed shower pan, or knob-and-tube wiring found behind the wall adds repair before the finish goes in.
- Permit scope: Cosmetic tile and vanity work often doesn’t require a permit; moving plumbing, electrical, or adding a new fixture does, and that pulls in inspection time.
A written estimate from us lists the cabinetry, countertop, tile, fixtures, labor, and disposal line by line, plus what’s excluded: framing repairs from hidden damage, permit fees, and any tile the homeowner supplies direct. Upfront pricing means the number you see is the number you pay, and we back the work with our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Livermore Homes Specifically Do to This Job
Livermore sits directly on the Greenville Fault and inside the seismically active Livermore Valley, which changes how we approach even a vanity and tile job in homes here. Downtown Livermore (94550) is full of early-1900s to 1950s ranches and Victorians on raised foundations, and some still have cripple walls and unreinforced brick chimneys that predate any seismic code. When the city’s building department sees a permitted remodel on that stock, it may flag a retrofit requirement, so we plan for that possibility rather than let it surprise you mid-job. In 94551, the 1970s – 90s tract homes and newer infill are easier on that front but come with their own quirks: slab movement from Livermore’s hot, dry summers (regularly 95 – 105°F) and clay-heavy soils shows up as cracked floor tile and out-of-level substrates under a new vanity. We check floor flatness and either grind, self-level, or add an uncoupling membrane before setting tile. And because Livermore sits at the edge of the Diablo Range wildfire interface, we think about fire-resistant materials and weather-tight penetrations on the exterior side of a bath project. If exterior work comes up, homeowners often pair this with Tile Roofing in Livermore or Specialty Roofing in Livermore. We cover all of Livermore and the surrounding East Bay.
Serving Livermore, CA – Our Local Coverage Area
We serve Livermore and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Livermore
A vanity-and-tile swap takes 7 – 10 working days on site, plus cabinet lead time if you’re ordering semi-custom. A larger job with full floor and shower tile can run two to three weeks. Call (888) 419-3650 for a timeline based on your actual layout.
Often no, if the work is cosmetic and the plumbing and electrical stay put. Moving a drain, adding a circuit, or installing a new fixture usually does require one, and the city’s building department inspects it. We tell you upfront which side of that line your job falls on and pull the permit if it’s needed.
Yes, in most cases. As long as the new vanity matches the existing rough-in dimensions, a swap is straightforward and keeps cost closer to $800 – $3,000. A wider vanity or a new sink position means relocating the drain and supply, which adds labor and usually a permit.
A typical mid-grade job lands around $9,000 – $20,000, with quartz counters, a semi-custom vanity, and porcelain tile. The ceiling moves up with premium stone, large-format tile, or a full-tile shower. Call (888) 419-3650 for an exact quote; estimates are free and written line by line.
Every job we do is covered by our 730-Day Done Right Promise. If workmanship fails within that window, we come back and make it right. The promise applies to the labor and installation, and we’ll walk you through what the manufacturer covers on cabinets, countertops, and fixtures.
Get a Free Vanities, Tile & Fixtures Estimate in Livermore
If you’re ready to price Vanities, Tile & Fixtures in Livermore, call us at (888) 419-3650. A live person answers 24/7, and we’ll set a time for a free on-site estimate and design consult. On that visit we measure the room, talk through materials, and hand you a written line-item quote with the scope and pricing spelled out. No pressure, no surprises.
Written by the team at Groundwork Construction Co.