Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Blackhawk, CA: What the Job Actually Takes
Most cabinet and countertop projects in Blackhawk run $14,000 – $45,000 when you’re replacing both along a full kitchen wall line, and a typical job takes four to eight weeks from template to final caulk. Cabinets alone usually land between $4,000 and $13,000; countertops run $2,000 – $6,500. The number that matters more than any of those is whether your street falls under the Blackhawk Owners Association’s architectural review, because that review has to clear before the first box comes off the wall. Call (888) 419-3650 and we’ll walk you through both.

How we run a Cabinets & Countertops job, stage by stage
We don’t hand you a catalog and disappear. Here’s the actual sequence, and where your decisions land.
Day 1: measure, photograph, and read your CC&Rs. We take field measurements, shoot the existing cabinet run and counter edge, and pull whatever design guidelines your HOA packet contains on finish color and door style. This is a 90-minute visit, and the decision you make here is whether the new layout stays exactly where the old one sat. Moving a sink or range means plumbing and electrical relocation, which changes both cost and review scope.
Days 2 – 10: design and the HOA package. We put together the cabinet elevations, a countertop sample, and a finish specification you can submit for architectural review. Blackhawk runs on documentation, so the sample board and the color callout go in one packet. You approve the door style, the box material, and the slab selection during this window. Most of the back-and-forth in a Blackhawk job happens right here, not on site.
Demo week: tear-out and rough prep. Old cabinets come out, and we check the wall behind them. In these homes we often find drywall patching, out-of-plumb framing, or a shutoff valve that’s been waiting 30 years to fail. We correct the substrate, confirm the electrical rough-in is where the new boxes need it, and set the new cabinet line. Carcass installation on a straight run runs two to three days.
Template and fabrication: 5 – 10 business days. For natural stone or quartz, the fabricator templates after cabinets are set, then cuts. That gap is real lead time, not padding. You decide the edge profile and the sink cutout placement during this stage, and that’s the last point to change your mind without a change order.
Install, backsplash, punch list. Countertops set, sink and faucet go in, then the finish work. Final walkthrough happens with a written checklist against the 730-Day Done Right Promise. If something’s off, we fix it. That’s the whole point of putting the guarantee in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Cabinet & Countertop choices you’ll actually weigh
Every option below is a real fork in the road. Here’s the honest trade-off of each.
- Stock vs. semi-custom cabinets. Stock boxes cost less and install faster, but they constrain you to fixed widths, which in a Blackhawk kitchen with a non-standard wall run usually means filler strips. Semi-custom, including the KraftMaid line we work with, lets you hit the wall exactly and choose the door profile and finish. That flexibility is where most of the price difference lives.
- Quartz vs. natural stone. Quartz (Cambria makes several lines we install) is non-porous, needs no sealing, and holds a uniform look. Granite and marble give you one-of-a-kind movement but want sealing and won’t tolerate a hot pan set down carelessly. For a busy household, quartz wins on maintenance.
- Slab thickness and edge profile. A 2cm slab with a built-up edge looks similar to 3cm but costs less and weighs less on the cabinet run. Edge profiles run from a simple eased edge to a full bullnose, and the fancier the profile, the more fabrication labor.
- Under-cabinet lighting and outlet placement. Deciding this before the backsplash goes in costs a fraction of retrofitting it later. It’s also a small item that changes how the finished kitchen reads at night.
- Soft-close and full-extension hardware. Worth the upcharge on every drawer you’ll open a thousand times.
What Cabinets & Countertops costs in Blackhawk, CA
Full cabinet and countertop replacement in Blackhawk runs $14,000 – $45,000. Here’s how that range breaks down and what pushes a job toward either end.
| Line item | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
Four things move the number. Size and run length – a galley kitchen and an estate kitchen with two islands are different jobs entirely. Existing condition – if the wall behind the cabinets is out of plumb or the old shutoffs fail on demo, correction work adds cost. Relocation – moving the sink, range, or a gas line means plumbing and electrical plus a broader review scope. Material grade – semi-custom KraftMaid boxes and a Cambria slab sit at a different price than stock boxes and a laminate top.

Our written estimate is line-item. You see cabinet cost, countertop fabrication, install labor, and any rough prep separately. What’s included: measure, design, demo, install, and haul-away. What’s typically not: permit fees if the HOA review expands the scope, and any structural change discovered behind the wall. No-hassle upfront pricing means the number you see is the number you pay unless you approve a change in writing.
See the difference
Before
After
Before
After
Before
AfterWhat Blackhawk homes specifically do to this job
The custom and semi-custom estates off Blackhawk Drive and around the Country Club were built mostly from the mid-1980s into the 2000s, with stucco over framed walls and multi-level floor plans. That build era shows up in the kitchen. Original cabinet boxes from that period are often at the end of their life, and the walls behind them have moved enough that a new run needs shimming and fresh substrate.
The bigger factor is the HOA. Blackhawk is a gated, master-planned community, and every project here – a deck, an addition, a cabinet swap that changes the visible finish – clears architectural review and CC&R design approval before a permit is pulled. That means approved door styles and colors, aesthetic match to the original specification, and scheduling around gate access. We build the sample submission and the color callout into the front of the schedule because that’s where Blackhawk jobs stall. Contractors who treat the HOA packet as an afterthought here end up waiting. And when a kitchen job grows into a fuller scope, homeowners often pair this with a Walk-In Showers & Shower Remodeling in Blackhawk or a Tub-to-Shower Conversion in Blackhawk, or fold it into Kitchen Remodeling in Blackhawk.
Serving Blackhawk, CA – Our Local Coverage Area
We serve Blackhawk and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Cabinets & Countertops in Blackhawk
Plan on four to eight weeks from template to finish, with roughly two to three weeks of that being HOA review and fabrication lead time. The install itself is usually under a week. Call (888) 419-3650 for a schedule estimate on your kitchen.
Straight replacement of cabinets and countertops without moving plumbing or electrical generally doesn’t trigger a building permit, but the HOA architectural review still applies if the visible finish changes. Any layout move that touches plumbing or gas does need a permit. Call (888) 419-3650 and we’ll sort which applies to your project.
Yes, and that’s the most common path in Blackhawk. Keeping the sink and range in place avoids plumbing and electrical relocation and keeps the review scope narrow. It also keeps the job nearer the low end of the $14,000 – $45,000 range.
Most Blackhawk cabinet and countertop projects land between $14,000 and $45,000 depending on size, layout changes, and material grade. Cabinets alone run $4,000 – $13,000 and countertops $2,000 – $6,500. Call (888) 419-3650 for an exact quote – estimates are free.
Every job is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right, for two full years from completion. Call (888) 419-3650 to talk through the details.
Get a free Cabinets & Countertops estimate in Blackhawk
We’ll come out, measure your kitchen, review your HOA packet with you, and hand you a written line-item estimate at no cost. A live person answers the phone 24/7, so you’re never stuck in voicemail. Financing at 0% for 18 months and $1,000 off projects over $10,000 are available. Call (888) 419-3650 to schedule your free estimate for cabinets and countertops in Blackhawk, and ask about our wider Kitchen Remodeling service while you’re at it.
Written by the team at Groundwork Construction Co.