Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in Walnut Creek, CA: What It Costs and How Long It Takes
An iron fence in Walnut Creek typically runs $3,500 to $9,000 for a standard residential run, and most jobs take three to five working days once materials land. Wrought iron and steel ornamental fencing hold up to heat, dry summers, and hillside wildfire pressure far better than wood, which is why so many Walnut Creek properties use it at the street front. Call (888) 419-3650 for a free on-site estimate with a written line-item quote.

How We Build an Iron Fence, Stage by Stage
Iron fence work is mostly a layout and setting job. The steel arrives already fabricated; what makes a fence last twenty years or fail in five is what happens in the ground and at the welds. Here’s the sequence we follow on Walnut Creek jobs.
Stage 1: Site visit and layout (day 1)
We walk the property line with you, flag the run, and confirm the height and finish. On sloped lots off the hillside streets we check grade changes that affect panel spacing and gate swing. You decide the fence height, panel style, and where gates go at this point, because changing a gate location after posts are set adds real cost.
Stage 2: Utility marking and permit check (days 1-2)
We call for utility locating before a single hole is dug. In Walnut Creek, fences over six feet, or fences on a property line with a retaining wall, usually trigger a permit and sometimes a survey. We confirm what your job needs and pull what’s required. You decide whether you want us to handle the permit paperwork or you’d rather file it yourself.
Stage 3: Demolition and footing prep (days 2-3)
Old fencing, shrubs, and any failing concrete come out. Post holes get dug to depth and set with concrete footings sized to the panel load. This is the slow, unglamorous stage and the one that decides how straight and solid the finished fence feels. You don’t need to be on site unless we hit an underground surprise.
Stage 4: Setting posts and hanging panels (days 3-4)
Posts go in plumb, concrete cures, and fabricated panels hang between them. Pickets, rails, and finish coats are checked. Gates get aligned and hardware adjusted so they swing clean and latch without a shim. You walk the line with us before we leave.
Stage 5: Final walkthrough and punch list (day 5)
We close out with a full inspection of welds, fasteners, gate swing, and finish touch-ups. Any item on your punch list gets handled before we call the job done. Everything is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for an Iron Fence
Iron and steel ornamental fencing is not one product. Here’s the honest rundown of what buyers actually pick between and where each choice costs or saves.
- Wrought iron (true forged steel): Heaviest, most traditional, and the most expensive. Suits high-end street frontage and historic carriage-house-style entries. It also costs the most to repair if a section bends.
- Steel ornamental (tubular or solid bar): The workhorse choice. Stronger per dollar than wrought iron and available in more finishes. This is what most Walnut Creek owners end up with.
- Powder-coat vs. wet paint finish: Powder coat holds color far longer and resists chipping, but it costs more up front and can’t be spot-repaired easily. Wet paint is cheaper and touchable.
- Matching a gate to an existing fence: If you already have iron on the property, we can match the panel pattern and finish so the new run reads as original rather than bolted on.
- Fire-resistant configuration: Non-combustible iron is already a strong choice in hillside wildfire zones. We can specify defensible-space spacing and gate widths that meet the intent of local defensible-space guidance.
What an Iron Fence Costs in Walnut Creek, CA
Most residential iron fence jobs here land between $3,500 and $9,000. That range covers a typical front-yard run. Five variables push a job toward the low or high end.

- Linear footage: The biggest single driver. A 40-foot run costs far less than an 80-foot run, and the price scales close to linearly with length.
- Height and style: A 4-foot ornamental run is cheaper than a 6-foot panel with decorative finials and scrollwork.
- Gate count and automation: Each gate adds fabrication and hardware cost. A driveway gate with an opener adds more than a pedestrian gate.
- Site conditions: Sloped grade, rock in the soil, or old concrete to demo all add labor.
- Permits and survey: If your run needs a survey or a permit, that’s billed separately and stated up front.
What’s in a written estimate: materials, post setting, finish, gate hardware, permit pulls, and a date. What typically isn’t: a survey if boundary lines are unclear, repairs to an existing retaining wall, and landscaping restoration. Nobody gets a surprise invoice from us. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Walnut Creek Homes Specifically Do to This Job
Walnut Creek’s market is a tug-of-war between postwar ranch homes and the luxury infill coming out of the Lamorinda and Diablo Valley demand, and iron fence work reflects that split. On the ranch streets off Ygnacio Valley Road and in the older tracts near downtown, we’re often replacing a tired wood or chain link run on a boundary that hasn’t moved in fifty years, which means a boundary survey first and a fence that needs to look right from a single-story roofline. In the hillside neighborhoods, we’re setting iron fence on grade changes and watching defensible-space clearance where wildfire risk is real. Summer heat bakes exterior finishes, so we schedule installation away from peak heat where we can. HOA design review is common on the newer custom homes, so finish color and panel style get approved before fabrication starts. If your iron fence is part of a full Fence Installation in Walnut Creek project or a larger site plan, we scope both together. Many owners also pair this with Patios, Walkways & Pool Decks in Walnut Creek to finish an entry, and some with ADU Design & Permitting in Walnut Creek when a detached unit needs its own fenced yard.
Serving Walnut Creek, CA – Our Local Coverage Area
We serve Walnut Creek and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Iron Fence in Walnut Creek
Plan on three to five working days on site once materials arrive. Fabrication lead time typically adds one to three weeks, depending on the pattern and finish. Call (888) 419-3650 for a schedule estimate specific to your run.
Often yes, especially at six feet or taller, on a property line with a survey question, or near a hillside slope. We confirm what your specific run requires before digging. Call (888) 419-3650 and we’ll tell you what your job needs.
Usually yes. Iron fence is a shallow-footing, above-ground installation and rarely triggers electrical or plumbing work. The one exception is an underground utility line in the path, which the locate call catches first. Call (888) 419-3650 if you’re unsure what’s below grade.
Most jobs run $3,500 to $9,000, driven by linear footage, height, gate count, and site conditions. Call (888) 419-3650 for an exact quote. Estimates are free.
Every iron fence we install is covered by our 730-Day Done Right Promise. If workmanship fails inside that window, we fix it. Call (888) 419-3650 to talk through what’s covered on your job.
Get a Free Iron Fence Estimate in Walnut Creek
We’ll come out to your Walnut Creek property, measure the run, walk the grade, and hand you a written line-item estimate with no pressure. Our fence installation team works throughout Walnut Creek, and calls are answered by a live person 24/7. Call (888) 419-3650 to schedule your free estimate. Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available.
Written by the team at Groundwork Construction Co..