Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Roof Replacement & Installation in Danville, CA: What the Job Actually Involves
Roof Replacement & Installation in Danville usually runs $8,000 – $20,000 for a standard asphalt shingle tear-off and re-roof on a typical 1960s – 1990s single-family home, and takes three to five working days from tear-off to final inspection. Tile and metal assemblies push higher. On most Danville houses the real timeline is set by the permit and inspection schedule, not the crew. Call (888) 419-3650 for a free on-site estimate with a written, line-item quote.

The Process, Stage by Stage: What Happens on Day 1 and Day 3
We walk the roof and attic before anything gets ordered, then we schedule the work around the permit and around you. Here’s the real sequence on a Danville replacement.
- 1
Stage 1 – Inspection and written scope (day 0). We measure the roof planes, check decking from the attic side, note flashing conditions at chimneys, skylights and valleys, and photograph anything that will change the number. You get a line-item quote the same week. Nothing gets ordered until you approve it.
- 2
Stage 2 – Permit and material delivery (roughly 5 – 15 business days, depending on the city). We pull the roofing permit and schedule the inspection sequence. Shingles, underlayment and flashing are delivered and staged on the driveway or a protected area, not on landscaping. You choose shingle color and grade at this stage, and we confirm dumpster placement with you.
- 3
Stage 3 – Tear-off and decking inspection (day 1). The old roof comes off in a single day on most single-family homes. Once the deck is exposed, we inspect every sheet for rot, soft spots and failed nailing, and we walk you through anything that needs replacement before we cover it back up. That’s the one decision point where the quote can legitimately change, and we put it in writing before proceeding.
- 4
Stage 4 – Underlayment, flashing and installation (days 2 – 3). Ice-and-water membrane goes in the valleys and at penetrations, then underlayment, then the field shingles. New flashing at the chimney, vents and pipe boots happens here, not as an afterthought. Ridge venting and starter courses close it out. A typical Danville roof gets shingled in two days.
- 5
Stage 5 – Final inspection, cleanup and walkthrough (days 4 – 5). The city inspector signs off, we magnet-sweep the yard and driveway for nails, and we walk the finished roof with you. You get the material warranty documents and the 730-Day Done Right Promise in writing.
What you decide and when matters: shingle color and grade by the end of Stage 2, any decking repair on day 1, and gutter or skylight add-ons before tear-off. Everything else is ours to handle.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make: Materials and Assembly
Most Danville replacements come down to four decisions, and each one carries a real trade-off.
- Asphalt shingle grade. Architectural shingles are the standard for this market, and they’re what the $8,000 – $20,000 range reflects. Upgrading the wind and impact rating adds cost but matters more every year with the hillside fire-zone exposure. Brands like GAF and CertainTeed both have lines worth comparing.
- Tile versus shingle. Many Danville homes already wear concrete tile, and matching or replacing tile is a different job with a higher price and heavier structural load. Metal Roof Installation runs $15,000 – $40,000 and suits homeowners who want a 40-plus-year assembly with fire resistance. We’ll show you the life-cycle math instead of just quoting the highest number.
- Underlayment and fire-hardened details. The layer under the shingles is where a cheap job and a good one part ways. In the western hills, fire-resistant underlayment and ember-resistant venting are worth the upcharge.
- Ventilation and attic R-value. A new roof is the cheapest moment to fix a hot attic. Ridge venting, intake venting and added insulation keep summer heat out and protect the new assembly.
What Roof Replacement & Installation Costs in Danville, CA
Expect $8,000 – $20,000 for a standard tear-off and asphalt replacement. That range moves based on five things:
- Roof size and pitch. A steep, cut-up roof with valleys and dormers takes more labor and more material than a simple gable.
- Deck condition. Rotten sheathing or failed nailing adds repair cost once the deck is exposed.
- Material grade. Architectural shingles sit mid-range; tile and metal land far higher.
- Penetrations and flashing. Chimneys, skylights and multiple valleys mean more detail work.
- Permit and inspection scope. Danville permits and the required inspection sequence are part of the quote, not a surprise.
A written estimate includes tear-off, disposal, underlayment, flashing, field material, ridge vent and cleanup. It typically excludes decking replacement beyond a set allowance, skylight swaps and gutter work unless you ask us to quote them. Homeowners often pair this with Window Replacement in Danville while the scaffolding is up, which saves on setup.
See the difference
Before
After
Before
After
Before
AfterWhat Danville Homes Specifically Do to This Job
Danville is a built-out, high-value Tri-Valley suburb where nearly all roof work is replacement on existing lots, not new construction. That changes the job. You’re re-roofing a $1.5M+ home the owner intends to keep, so matching existing detailing, protecting mature landscaping and passing design review matter more than speed. Work splits sharply between the flat, established 94526 core and the hillside, fire-prone 94506 side around Blackhawk and Tassajara. In 94506, plans increasingly hinge on fire-hardened assemblies, ember-resistant vents and defensible-space detailing, because the western hills sit in WUI zones with intense summer sun. In 94526, we’re usually tying a new roof into an existing kitchen or primary-suite project or a detached ADU. The 1960s – 1990s stucco-and-tile stock means flashing at original penetrations needs close attention. When the scope grows into a full exterior rebuild, that’s part of a full Roofing in Danville conversation and our wider Roofing service.

Serving Danville, CA – Our Local Coverage Area
We serve Danville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Roof Replacement & Installation in Danville
Most Danville homes take three to five working days from tear-off to final inspection, with the roof itself shingled in two. The permit and inspection schedule can extend the calendar by a week or two. Call (888) 419-3650 to schedule your free estimate and get a firm timeline for your roof.
Yes, a roofing permit and inspection are required for a full replacement. We pull the permit and manage the inspection sequence as part of the job. Call (888) 419-3650 and we’ll explain exactly what the permit covers on your project.
Only if the exposed deck turns up rot or failed sheathing, and we put that change in writing before we proceed. Upfront pricing means the number you see is the number you pay. Call (888) 419-3650 for a written, line-item quote.
Most Danville replacements run $8,000 – $20,000 for asphalt shingles, with metal and tile higher. Size, pitch, deck condition, material grade and permit scope move the number. Call (888) 419-3650 for an exact quote; estimates are free.
Every replacement is covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction, on top of the manufacturer’s material warranty. If it’s not done right, we make it right. Call (888) 419-3650 to talk it through.
Get a Free Roof Replacement & Installation Estimate in Danville
When you’re ready to price Roof Replacement & Installation in Danville, call (888) 419-3650. A live person answers around the clock. We’ll schedule a free on-site estimate, walk your roof and attic, and send a written line-item quote with no surprises. We cover Danville and the surrounding Tri-Valley, and homeowners often pair roofing with Door Installation in Danville. Estimates are free, and the 730-Day Done Right Promise backs the work in writing.
Written by the team at Groundwork Construction Co.