Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vinyl Fence in Danville, CA: What It Costs and How Long It Takes
Most vinyl fence projects in Danville run $3,500 to $9,000, and a typical 100- to 150-foot run is finished in two to four days once materials are on site. The number moves with linear footage, height, gate count and how much old fencing has to come out first. We install vinyl on the property lines of the flat 94526 core and the sloped lots up in 94506, and the difference between those two jobs is real. Call (888) 419-3650 to schedule a free on-site estimate.

How We Run a Vinyl Fence Job, Stage by Stage
The sequence below is what actually happens from your first call to the final walkthrough. Vinyl looks simple from the street. The work that makes it last happens before a single panel goes up.
Stage 1: Site visit and layout (day 1, about 60 – 90 minutes)
We walk the property line with you, confirm where the fence goes, and check for the things that quietly change a price: an existing fence to remove, irrigation lines, mature landscaping right on the line, and grade changes on hillside lots. This is where you decide style, height and whether you want a gate. Nothing gets ordered until you’ve approved a written, line-item quote.
Stage 2: Utility locate and permitting (days 1 – 2, then the county’s clock)
Before any digging, 811 marks the buried lines. If your run crosses a public right-of-way or your property sits inside an HOA, we pull the fence permit and confirm height and setback rules, since Danville properties range from open lots in the 94526 core to gated hillside parcels in 94506 with their own design review. You don’t chase paperwork. We do.
Stage 3: Demo and post setting (day 2 – 3, one to two days)
Old fencing comes out and haul-away happens the same trip. Posts go into concrete footings sized for wind load and soil, spaced and set to a string line, then they cure overnight before anything hangs on them. On a 150-foot run that’s roughly 20 to 25 posts. We don’t skip the cure, because posts that move later loosen every panel with them.
Stage 4: Rails, panels and gates (day 3 – 4, one day on most runs)
Rails and pickets go up square and level, caps and trim get fitted, and gates are hung and adjusted so they swing true and latch clean. This is the stage where you’ll notice the difference between a crew that measures and one that eyeballs it. We’re on site for it.
Stage 5: Final walk and cleanup (same day the last panel goes up)
We walk the whole run with you, check every post, panel and gate in front of you, and leave the site broom-clean. Your 730-Day Done Right Promise starts here: if something isn’t right, we make it right. If this fence is part of a full Fence Installation in Danville scope alongside other work, we coordinate the schedule so you’re not doing two projects’ worth of disruption.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Vinyl Options You’ll Actually Choose Between
Two-thirds of the decisions on a vinyl fence get made in that first half hour. Here’s what’s on the table and who each choice suits.
- Panel style: privacy (solid) vs. semi-privacy vs. picket. Solid privacy is the most common ask on a Danville lot edge, because neighbors are close and mature trees don’t block every angle. Picket costs less per foot but shows everything. Semi-privacy with a lattice top can help a hillside yard hold a view while still marking the line.
- Height: 4, 5 or 6 feet. Six feet is the usual privacy choice and the height most HOAs cap without extra review; four feet reads more like a garden boundary. Going above six feet often triggers both HOA and permit questions.
- Color and finish. White, tan and gray dominate, and the choice is mostly about matching the stucco around it. Woodgrain-textured vinyl costs more and looks warmer against tile-roof Mediterranean homes; flat vinyl reads cleaner against modern finishes.
- Grade and thickness. Thicker wall vinyl resists dents and holds color better in strong sun. This is where a cheap bid and a real bid usually part ways, and it’s the first thing to inspect on any quote.
- Gates, caps and post options. Each gate adds cost. Post caps and decorative trim are small line items that finish the look, and steel-reinforced posts are worth it on long runs or windy exposure.
Brands like Belgard show up more on the hardscape side than the fence line, so we focus on vinyl manufacturers who back their product in writing, since that’s what protects you after your workmanship warranty is standing behind the install.

What Vinyl Fence Costs in Danville, CA
The lead range is $3,500 to $9,000 for a residential vinyl fence, and that’s the number to budget against. Here’s what pushes a job toward either end.
- Linear footage. This is the single biggest driver. A 60-foot side-yard run sits at the low end; a 200-foot perimeter with multiple corners lands near the top.
- Existing fence removal. Taking out old wood or chain link and hauling it away adds labor and disposal. A clean, empty line saves you money.
- Grade and terrain. Sloped lots in the hills require stepped or racked panels, which takes more time and cuts differently than a flat run.
- Material grade. Premium thick-wall vinyl and woodgrain finishes cost more up front and hold up far longer under intense Tri-Valley sun.
- Gates and permit scope. Each gate, and any public right-of-way permit, adds to the total.
Your written estimate lists materials, footage, posts, footings, demo, haul-away and permits line by line, so the number you see is the number you pay. No change orders from vague bids. What’s usually outside a base quote: unexpected utility relocation, concrete or retaining-wall work at a grade break, and special custom metal gates. Call (888) 419-3650 for an exact quote, and ask about 0% financing for 18 months and $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Danville Homes Specifically Do to This Job
Danville is built-out. Almost every fence we install is on an existing lot around a home the owner is keeping, so matching what’s already there matters more than it does in a newer subdivision. In the flat 94526 core, that often means a clean line against mature landscaping and stucco that’s decades old, with the fence running tight to established trees and irrigated beds. Up in the hillside 94506 side, including the Blackhawk and Tassajara areas, sloped lots and fire-zone exposure change the plan: correct footing depth for grade, and a harder look at defensible-space and access requirements that rebuilds in the wildland-urban interface have to answer. The intense inland sun is the other thing we plan for, since it bleaches cheap vinyl and stresses posts more than the fog-cooled cities nearer the bay. We see more faded, cracked and post-leaning fences on exposed western lots than anywhere else. If you’re also reworking the front approach, homeowners often pair this with Driveway Repair & Replacement in Danville so the whole property line finishes together.
Serving Danville, CA – Our Local Coverage Area
We serve Danville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Vinyl Fence in Danville
Most residential runs take two to four days on site once materials arrive and permits clear. A short side-yard fence is often done in one to two days, while a full perimeter with gates and sloped sections runs longer. Add time for permit review if your run crosses a right-of-way or your HOA requires approval. Call (888) 419-3650 for a timeline against your specific lot.
You need a permit when the fence crosses a public right-of-way or exceeds your local height and setback limits, and many HOAs require written approval before any fence goes up. Interior property-line fences at standard heights usually don’t need a permit, though rules vary by parcel. We handle the paperwork for you and confirm requirements before ordering. Call us to check what your property needs.
Yes, in most cases. A vinyl fence needs post footings and nothing else, so there’s no foundation, plumbing or framing work to touch. The main things to watch are buried irrigation lines and mature root systems, which the 811 locate and the site walk catch. Homeowners often pair this with Asphalt Driveways & Resurfacing in Danville when the driveway edge meets the fence line and they’d rather not tear up access twice.
Plan on $3,500 to $9,000 for a residential vinyl fence, with footage, height, gates and demo driving the total. Your quote is fixed up front, line by line, so the number holds unless you change the scope. The 730-Day Done Right Promise backs the install in writing. Call (888) 419-3650 for an exact quote; estimates are free.
Every vinyl fence we install is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That sits on top of the manufacturer’s vinyl warranty, which is why we only work with manufacturers who back their product. You’ll also deal with background-checked, uniformed technicians on every job. Call us with questions about your coverage before you commit.
Get Your Free Vinyl Fence Estimate in Danville
Call (888) 419-3650 to schedule a free on-site estimate for your vinyl fence in Danville. We’ll walk the property line with you, check for irrigation and grade issues, confirm height, style and permit needs, and hand you a written, line-item quote with a fixed price. Our technicians have up to 12 years of experience, and every call is answered by a live person, 24/7. That’s our fence installation service in action, and you can see all the communities we cover on our Danville page. Estimates are free.
Written by the team at Groundwork Construction Co.