Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sliding & Patio Doors in Danville: What the Job Actually Involves
Replacing a sliding or patio door in Danville runs $2,400 to $9,500 installed, with most homes landing between $3,800 and $6,200 for a standard two-panel slider or a French hinged pair. The work itself takes one to three days once the unit is on site, though ordering a custom-size door for a 1960s or 1970s Danville ranch can add two to five weeks to the calendar. Call (888) 419-3650 for a free on-site estimate – we’ll measure the rough opening and give you a written line-item price before anything is ordered.

How We Replace a Sliding or Patio Door, Stage by Stage
Most contractors skip straight to “we’ll install it.” Here’s what actually happens between the first visit and the final walkthrough, so you know what you’re deciding and when.
Stage 1: Measure and site review (day 1, about 60 minutes)
We measure the rough opening, check the header for sag, and confirm the threshold sits level. On older Danville homes the door frame is often out of square by a quarter inch or more, which changes whether we order a standard unit or a custom one. You’ll get a written estimate with the door model, glass package, finish, and installation scope spelled out.
Stage 2: Order and lead time (2 to 6 weeks)
This is the stage homeowners underestimate. Standard sizes in vinyl or fiberglass arrive in about two weeks. Custom widths for a non-standard opening, or Andersen and Marvin wood-clad units with a specific finish, run four to six weeks. You’ll approve the exact unit before we place the order – no substitutions.
Stage 3: Demo and prep (day of install, morning)
We pull the old door, inspect the framing for rot or water damage, and replace any soft sill material before the new unit goes in. Danville’s dry summer heat and winter rain cycles often leave the bottom plate of a 30-year-old slider with some moisture damage. We flash the opening with a sill pan and building wrap so water can’t get behind the new frame.
Stage 4: Install and seal (day of install, afternoon)
The new door goes in plumb and level, we shim and fasten the frame, insulate the perimeter, and seal with a high-grade exterior caulk rated for full sun. Glass is set with a low-E or dual-pane option you’ve chosen. Sliding panels get adjusted on the track until they glide with one finger.
Stage 5: Final walkthrough and warranty handoff (day of install, end)
You test the door yourself – lock it, slide it, check the screen. We hand you the manufacturer’s warranty paperwork and explain what’s covered under our 730-Day Done Right Promise. If anything doesn’t feel right in the first two years, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Four decisions move both the look and the price, so it’s worth understanding the trade-offs before you commit.
- Sliding vs. hinged French: A slider is the cheapest per square foot in a wide opening and doesn’t swing into the room – good for a tight kitchen or breakfast nook. A hinged French pair takes up floor space and costs $800 to $1,500 more, but seals tighter and feels more like a main entry. For a Danville great room opening onto a patio, hinged is usually the better long-term pick.
- Vinyl vs. fiberglass vs. wood-clad: Vinyl is the budget choice at $2,400 to $4,500 installed, but it can warp in intense Tri-Valley sun on a west-facing wall. Fiberglass handles heat far better and runs $3,200 to $5,500. Wood-clad – Andersen and Marvin being the two we specify most – gives the warm interior look for $5,000 to $9,500, with the exterior clad against weather.
- Glass package: Standard dual-pane is fine on a shaded side. On a south- or west-facing door, low-E glass with argon keeps the room cooler and protects furniture from UV – worth the $300 to $700 upcharge.
- Configuration: Two-panel, three-panel, corner, or multi-slide. A multi-slide pocket door clears the whole opening but almost always requires header work and a wider rough opening, which pushes you into structural and permit territory.
What Sliding & Patio Doors Cost in Danville, CA
Installed prices for a single door replacement in Danville run $2,400 to $9,500, with the median project in the low-to-mid $5,000s. Here’s the line-item breakdown we put in a written estimate:
- Standard vinyl slider, 6-foot opening: $2,400 – $4,200
- Fiberglass slider or French door, 6- to 8-foot opening: $3,200 – $5,800
- Wood-clad French or multi-panel (Andersen, Marvin): $5,000 – $9,500
- Low-E glass upgrade: $300 – $700
- Rot repair at the sill or framing: $250 – $900
- Permit and inspection (when structural or header work is involved): $200 – $600
Five things push a job toward the high end: a non-standard opening that requires a custom unit, rot or water damage behind the old frame, relocating the door in the wall (which means header and structural work), choosing a multi-slide pocket system, or matching an existing exterior finish so the new trim blends with the stucco.

What’s included in our written estimate: the door unit itself, removal and disposal of the old door, flashing and flashing pan, insulation, caulk, finish trim inside and out, and cleanup. What’s typically not included: interior paint, exterior stucco patch beyond minor trim coverage, and structural reframing if we find something unexpected behind the wall. We don’t do change orders mid-job – if we find rot, we show you photos and price it before proceeding.
See the difference
Before
After
Before
After
Before
AfterWhat Danville Homes Specifically Do to This Job
Most of the doors we replace in Danville sit in 1960s through 1990s custom and semi-custom homes – stucco walls, tile roofs, and sliding doors that were builder-grade when installed and have been sliding on worn tracks for 30 years. The flat 94526 core is where we see the most kitchen-and-family-room slider replacements, often tied to a remodel opening the back wall toward a patio. The hillside 94506 side, including Blackhawk and the Tassajara corridor, brings its own set of problems: intense western sun that fades and cracks vinyl frames, plus wildfire-zone exposure that has pushed more owners toward fiberglass and tempered or fire-rated glazing on exterior doors.
Hillside homes on sloped lots often have doors set into a stem wall with a step-down, which means the threshold flashing has to be handled carefully – we’ve pulled old sliders where water had been quietly working into the framing for years. Flat-lot homes in the 94526 core tend to fail differently, with tracks that fill with grit and rollers that grind instead of glide. Because Danville is a built-out, high-value suburb where owners are remodeling homes they intend to keep, the finish matters as much as the function: the new door has to tie into mature stucco and existing trim, not look like a tract-grade retrofit. We pull permits where structural or header work is required so the inspection passes and the record stays clean for resale. If the wider project is part of a full Windows & Doors in Danville scope, we coordinate the door work with the rest so the sequencing doesn’t stall the job. And when homeowners often pair this with Paver Driveways in Danville or new hardscape out back, we plan the door install so we’re not tearing up fresh patio work – or we bring in Fence Repair in Danville at the same time to clean up the yard line.
Serving Danville, CA – Our Local Coverage Area
We serve Danville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Sliding & Patio Doors in Danville
A standard replacement takes one day on site, and a French door with rot repair or a multi-panel system takes two to three days. Add two to six weeks for the door to arrive after you approve the order. Call (888) 419-3650 for a schedule based on your specific opening.
You need a permit when the job involves structural work – widening an opening, replacing a header, or moving the door to a new location in the wall. A same-size replacement in the existing opening typically does not require one. We confirm the requirement with the town before we start and handle the inspection so you’re not the one chasing paperwork.
Yes, if the new door fits the existing rough opening. Same-size swaps are straightforward. Changing to a wider slider or a multi-slide pocket system requires header work and often structural review, which is where the cost climbs. We’ll tell you honestly which category your job falls into during the free estimate.
Installed, most Danville jobs run $2,400 to $9,500, with a standard vinyl or fiberglass slider landing around $4,000 to $6,000. Custom sizes, wood-clad units, and structural changes push toward the top. Call (888) 419-3650 for an exact quote – estimates are free and written line-item.
Every door we install is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. The door unit itself carries its own manufacturer warranty – typically 10 to 20 years depending on the brand and glass package. Both are handed to you at the final walkthrough.
Get a Free On-Site Estimate for Sliding & Patio Doors in Danville
We’ll come measure your opening, check the header and sill, walk you through the door and glass options, and hand you a written line-item estimate – no pressure, no vague ballpark. Our Windows & Doors team covers Danville and the surrounding Tri-Valley, and technicians have up to 12 years of experience. Call (888) 419-3650 and a real person picks up, any hour. If your project qualifies, you’ll also see $1,000 off projects over $10,000 and 0% financing for 18 months.
Written by the team at Groundwork Construction Co.