Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Alamo: Costs, Timeline, and What Your Estate Lot Changes
Most backsplash, tile, and flooring work in Alamo lands between $14,000 and $45,000 when it’s part of a real kitchen or bath overhaul – a standalone backsplash alone runs $800 – $2,500, and a full kitchen remodel with tile and flooring typically falls in that $14,000 – $45,000 band. A backsplash and kitchen floor together usually take 3 to 7 working days; add a bathroom and a large-format floor and you’re looking at two to three weeks. Call (888) 419-3650 and we’ll walk your actual scope with you.

What separates an Alamo tile job from the same square footage in Walnut Creek is almost never the tile. It’s the subfloor under it, the plumbing stub-outs feeding the sink, and the fact that your address sits in unincorporated Contra Costa County.
How We Sequence a Backsplash, Tile & Flooring Job
No two estates are laid out the same, but the sequence below is the one we’ve landed on after enough jobs to trust it. Here’s what actually happens, and what you’ll be deciding at each stage.
Stage 1: Site walk and substrate check (Day 1, about 90 minutes)
We pull measurements, photograph the existing surface, and check whether the subfloor is flat enough and whether the wall behind the backsplash is drywall or cement backer board. On Alamo homes from the 1950s through the 1970s, we frequently find 3/4-inch plywood subfloor with a particle-board underlayment someone added later – that has to come out before tile goes down. You’ll decide right here whether the existing flooring comes up or gets a new tile underlayment laid over it. You also give us a decision on grout color and tile layout (offset, stacked, herringbone) because both affect the tile order.
Stage 2: Demo and tear-out (Day 2 to Day 3)
We pull the old flooring, remove the backsplash, and take out the sink if the backsplash is going behind it. Dust containment goes up before demo starts, and we haul debris the same day. If you’re relocating an outlet or a plumbing stub-out as part of this, that happens in this stage – and it’s the one thing that can stretch the timeline by a day or two if a wall needs to be opened. This is also when you should have your replacement flooring and tile on site, not arriving the morning of install.
Stage 3: Prep and flatness (Day 3 to Day 4)
This stage is invisible once the job is done and it’s where cheap jobs fall apart in year two. We level the subfloor to within 1/8 inch over 10 feet, prime the walls, and install backer board behind the backsplash. A common failure mode in Alamo homes built in the 1990s is a backer board that was never screwed through to framing – tile pops off in sheets a year later. We check framing on every job. You’ll approve the final flat surface before we trowel.
Stage 4: Tile setting and grout (Day 4 to Day 6)
Tile goes down in the layout you approved, with grout joints consistent to within a fraction of an inch. We set the backsplash last so it sits clean against the newly finished countertop edge. Grout goes in after the thin-set fully cures, and then sealer goes on after that – usually a day’s wait between grout and seal. You’ll want to be out of the space on set day for at least 4 to 6 hours while thin-set is curing, mostly because of dust and the smell.
Stage 5: Final walkthrough and warranty (Day 7)
We walk the job with you under good light, check every tile for lippage and every grout line for voids, and clean the space. You sign off against a written punch list. All work here is covered by our 730-Day Done Right Promise – if it’s not right, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
What You’ll Actually Choose Between
The Alamo customer usually knows what they want visually and hasn’t yet worked out the trade-offs. Here’s the honest version.
- Porcelain vs natural stone floor tile. Porcelain runs roughly $4 – $12 per square foot for material, wears like iron, and doesn’t care about the San Ramon Valley’s dry summer swing. Travertine and limestone run $8 – $20 per square foot and look gorgeous in the Mediterranean-style estates up on Stone Valley Road, but they stain and require sealing every year. If you have kids or pets, porcelain.
- Large-format vs standard tile. 24×24 or larger tiles have fewer grout lines, which is easier to maintain – but they cost more per square foot in labor because they require a flatter substrate and more careful setting. Plan on 15 – 25% more labor on a large-format floor.
- Backsplash material. Ceramic subway tile runs $8 – $20 per square foot installed – the safest choice. Glass and glass-mosaic runs $25 – $60 per square foot and looks sharp behind a white quartz countertop. Full-slab stone backsplash (matching your Cambria countertop) is the high-end choice, adds $2,000 – $5,000 to a typical kitchen, and hides grease better than mosaic because there’s almost no grout.
- Grout: cement vs epoxy. Cement grout is standard, cheap, and needs resealing yearly. Epoxy grout costs about 25 – 40% more and doesn’t stain – well worth it behind a cooktop where oil splatters.
- Layout and pattern. Stacked, offset, herringbone, or a running bond. Herringbone takes roughly 20 – 30% more labor and 15% more waste. If you’re pairing this with a Kitchen Remodeling in Alamo, we plan the tile layout around where the island and sinks will land, not the current configuration.
What Backsplash, Tile & Flooring Costs in Alamo, CA
The headline number is $14,000 – $45,000 for a kitchen or bath tile and flooring scope done end-to-end. Standalone pieces price out much lower:
- Backsplash installation: $800 – $2,500
- Floor tile (material plus install): $8 – $35 per square foot, depending on tile grade and pattern
- Small kitchen remodel including tile and flooring: $9,000 – $20,000
- Bathroom remodel including tile and flooring: $9,000 – $28,000
- Countertop installation as part of the same scope: $2,000 – $6,500
Four things push a job toward the top of that range. Size is obvious. Existing condition is not: a home where the subfloor has to be replaced entirely costs more than one where the underlayment is sound. Relocating plumbing or electrical – a new sink position, an added outlet behind the range – adds a day plus trade cost. Material grade (natural stone and glass) adds real dollars fast. And any scope that needs a permit pulls in an inspection fee and a day of waiting.

A written estimate from us includes tile material, setting materials, grout, sealer, demo, haul-away, prep, and the finish walkthrough. It does not include moving appliances if you decide mid-job to do that, or interior repainting on the wall above the backsplash – we can quote those separately, but they’re not baked in. The number on the estimate is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Alamo’s Lots and County Permitting Do to This Job
Alamo is unincorporated, so any tile scope that requires a permit – new plumbing behind a sink, structural work under a floor, a bathroom layout change – goes through Contra Costa County’s building department, not a city hall. That’s often a 3 to 6 week permit turnaround on a non-trivial scope. A backsplash replacement and a floor tile replacement with no plumbing or structural change typically don’t need a permit; a bathroom relocation or new sink line does. We pull the permit or tell you it isn’t needed, either way in writing.
On the estate lots off Stone Valley Road and up toward the ridgeline, we run into two things a flat-lot Danville property won’t. First, hillside lots often carry geotechnical and slope-stability review even for interior work if the scope touches a load-bearing floor over a crawlspace. Second, the well and septic setups mean we plan tile around where plumbing actually runs – and a well-fed rain shower at the far end of the house can require a pressure-balancing valve to be added while we’re in the wall. Older homes from the 1960s through the 1980s often have the original backer board behind the tile, which has absorbed decades of moisture; if the tiles sound hollow when tapped, we address it in the estimate rather than discovering it mid-job.
Homeowners often pair a tile and flooring scope with a Vanities, Tile & Fixtures in Alamo refresh on the same visit so the bathroom comes together as one job, and a Tub-to-Shower Conversion in Alamo while the shower wall is already open. For the full picture of our Kitchen Remodeling service, that lives on the main hub – this page is focused on the tile and flooring side.
Those long private driveways you see on Alamo’s half-acre to multi-acre parcels are one more thing that affects scheduling: a tile delivery truck needs the driveway clear and a safe approach. If yours curves and slopes, tell us at the site walk and we’ll coordinate delivery or bring the material ourselves. Not a big deal, but it’s the kind of thing that trips a job on day one.
Serving Alamo, CA – Our Local Coverage Area
We serve Alamo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Backsplash, Tile & Flooring in Alamo
A backsplash alone takes 1 to 2 days. A kitchen floor plus backsplash is typically 3 to 7 working days. A bathroom floor and shower tile is usually 5 to 10 working days. The things that add days, not hours: substrate replacement, plumbing relocation, and any permit inspection. Call (888) 419-3650 and we’ll tell you the realistic window for your specific job before you commit.
Usually not for the tile itself – a straight floor tile replacement or a backsplash swap doesn’t require one. You do need a county permit if the scope involves moving plumbing, electrical, or structure, which is common in Alamo because so much of the housing stock predates current code. Because Alamo is unincorporated, that permit comes from Contra Costa County, not a city building department, and turnaround can run 3 to 6 weeks. We pull it or tell you it isn’t required. Call (888) 419-3650 to confirm your scope.
Yes, and it’s the most common way we do it. If the sink, shower valve, and outlets stay where they are, the whole job is surface work: demo, prep, tile, grout, seal. That keeps cost lower and timeline shorter. If you’re considering moving the sink or adding an outlet behind the range, that decision needs to happen before the estimate, not after demo. Call (888) 419-3650 for a straight answer on your layout.
Full kitchen or bathroom tile and flooring scopes run $14,000 – $45,000 in Alamo, with a standalone backsplash at $800 – $2,500 and floor tile at $8 – $35 per square foot installed. The low end of the range is small scope, standard porcelain, no plumbing changes. The high end is stone or glass, large-format tile, and relocated plumbing. Call (888) 419-3650 for an exact number – estimates are free and the price you see is the price you pay.
Every job we do carries our 730-Day Done Right Promise – two full years on workmanship. If a tile pops, grout cracks, or a leak appears under the floor, we come back and fix it. That’s in writing, not handshake. Call (888) 419-3650 to get the estimate scheduled.
Get a Free Backsplash, Tile & Flooring Estimate in Alamo
We’re a construction company, not a tile showroom. We do this job in Alamo and we’d like to quote yours. Call (888) 419-3650 and a real person answers – yes, even at 10 p.m. on a Sunday. We’ll schedule a free on-site walk, measure the space, look at the substrate, and come back with a written line-item estimate within a few days. No surprise add-ons, no change orders. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off. That’s our Alamo service area and we’re ready to look at your job.
Written by the team at Groundwork Construction Co.