Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Pleasant Hill, CA: What It Costs and How Fast It Goes In
A chain link fence in Pleasant Hill typically runs $3,500 to $9,000, and most residential lots are finished in one to two days once the permit clears and utilities are marked. The price covers posts, framework, fabric, gates, and haul-off; what moves the number is linear footage, height, gate count, and how much old fence we have to tear out first. Call (888) 419-3650 for a free on-site estimate. We’ll measure the run, walk the property line with you, and give you a written line-item price before anyone touches a shovel.

How a Chain Link Fence Goes In, Stage by Stage
The sequence matters more than the material for most jobs, because a fence built in the wrong order is a fence that has to be rebuilt. Here’s how the work actually unfolds on a Pleasant Hill lot.
Stage 1: Property line and utility check (day of estimate, 30 to 45 minutes). We walk the run with you and confirm where the line actually sits. On Pleasant Hill’s tighter lots, the fence frequently runs along an alley edge or shares a boundary with a neighbor, so we measure from the documented line, not a guess. Before a single hole is dug, Underground Service Alert gets called and utilities are marked. You decide the exact line and where gates land.
Stage 2: Demo and site prep (half a day to a full day). Old fence comes down, posts get pulled or cut at grade, and the debris leaves the same day. If the old posts were set in concrete, we break them out rather than rocking new posts against them. On a narrow side yard, this is also when we figure out material staging so we’re not blocking a shared driveway. You decide whether any existing fence is worth salvaging; we tell you honestly if it isn’t.
Stage 3: Layout and post setting (half a day). Posts get set in concrete at the corners, ends, and gates first, then along the run at proper spacing. This is the stage where a lot is decided by inches: alleys, townhome side yards, and narrow access points all need lines set before concrete goes in, because moving a post after the fact means breaking it out. Concrete needs to cure before tension goes on the fabric. You don’t need to decide anything here.
Stage 4: Framework, fabric, and gates (half a day to a full day). Top rail, tension wire, and fabric go up, then gates get hung and adjusted so they swing clean and latch solid. This is where a tight-clearance job earns its keep: a gate that binds in a 36-inch opening isn’t a warranty claim nobody noticed, it’s an installation that was rushed.
Stage 5: Walkthrough and cleanup (30 minutes). We walk the whole run with you, check tension and gate swing, and haul off every scrap. Most jobs sit inside a two-day window after concrete cures.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Options You’ll Actually Choose Between
Chain link isn’t one product. These are the decisions that change both the look and the price.
- Gauge of fabric. 11.5-gauge is the residential standard and the right call for most yards. 9-gauge is heavier, costs more per foot, and suits a run that takes abuse or a property line with a lot of foot traffic behind it.
- Height. Four feet reads as a boundary marker; five feet is the sweet spot for most Pleasant Hill side yards; six feet is the security height and needs planning on a shared lot because it changes sight lines.
- Coating. Galvanized is the durable, plain option. Vinyl-coated (typically black or green) costs more but reads less industrial and holds up better where the sun hits hard, which matters in Pleasant Hill’s dry summers.
- Framework and posts. Heavier line posts and top rail matter more on a long run than on a short one. Terminal posts at corners and gates carry the tension, so this is not where to trim.
- Gates. Walk gates and a drive gate are the biggest single line item change. Gate width, latch style, and whether it needs a self-closing or lockable latch all come up on security-focused requests.
- Top rail vs. tension wire only. Top rail gives a cleaner, stiffer line; tension-wire-only saves money and suits a short back run nobody looks at.
What a Chain Link Fence Costs in Pleasant Hill, CA
The range for a residential chain link fence in Pleasant Hill is $3,500 to $9,000. That’s real money, so here’s what pushes a job toward the low or high end.

- Linear footage. The single biggest driver. A short back boundary sits at the low end; a full perimeter with a front line and side yards pushes up.
- Height and gauge. Going to six feet with 9-gauge fabric costs meaningfully more per foot than four-foot 11.5-gauge.
- Gate count and type. A drive gate adds more than two walk gates combined, and hardware choices move with it.
- Demo and old-post removal. Pulling concrete-set posts out of a mid-century yard takes labor and haul-off. A clean line with no old fence saves you.
- Permit scope. Some Pleasant Hill fences need a permit and some don’t. If the run touches a hillside lot or a property line that needs review, that adds time and a fee.
- Coating and finish. Vinyl-coated over galvanized costs more than plain galvanized.
A written estimate should spell out footage, height, gauge, coating, post and rail specs, gate count with hardware, demo, haul-off, and whether the permit is included. What it typically does not include: work a neighbor disputes mid-project, or ground conditions nobody could see, like a buried concrete pad under the fence line. We surface those on the walkthrough, not on the invoice. That’s what upfront pricing means here: the number you see is the number you pay, and the 730-Day Done Right Promise backs the workmanship in writing.
See the difference
Before
After
Before
After
Before
AfterWhat Pleasant Hill Homes Specifically Do to This Job
Pleasant Hill is a largely built-out, post-WWII Contra Costa suburb, and that shapes fence work in ways a greener city doesn’t see. Most of what we install here goes on a property that already had a fence, which means demo, old-post removal, and careful layout along a line that’s been there since the 1950s or ’60s. The dominant stock is single-story ranch and Eichler-adjacent tract homes, plus some 1960s-80s two-story subdivisions, and the lots are often tighter than the newer edges of Walnut Creek. That means alley-load lines, narrow side yards between homes, and property boundaries that need to be measured rather than eyeballed.
Two local realities come up on nearly every chain link job. First, Pleasant Hill sits on the Concord fault and against oak-studded hills, and the city runs a strict, small-city permitting culture. A fence along a hillside boundary or a lot backing to open space can pull in grading and drainage review, and the fire-resistant construction expectations along the wildland-urban interface shape how the exterior of a home gets detailed. A short flat-lot back run and a hillside boundary job are not the same project. Second, hillside lots handled with retaining walls and engineered foundations can make post setting and line layout a real question, so we walk those before quoting. If your fence work is rolled into a wider yard or access project, that’s part of a full Fence Installation in Pleasant Hill, and homeowners often pair fence work with Concrete Driveways & Concrete Work in Pleasant Hill when the gate approach is getting rebuilt at the same time. Our Fence Installation service covers the wider scope, and we cover all of Pleasant Hill.
Serving Pleasant Hill, CA – Our Local Coverage Area
We serve Pleasant Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Chain Link Fence in Pleasant Hill
Most residential chain link fences in Pleasant Hill are done in one to two days once the permit clears and utilities are marked, with concrete curing time between post setting and fabric tension. Larger perimeters or multi-gate jobs can stretch to three days. Call (888) 419-3650 for a timeline against your specific run.
Not always, but Pleasant Hill runs a strict, small-city permitting culture, so it depends on height, location on the lot, and whether the run sits on a hillside or property line that needs review. We confirm the requirement before quoting so there are no surprises. Call (888) 419-3650 and we’ll tell you what your job needs.
Expect $3,500 to $9,000 for a residential chain link fence in Pleasant Hill, driven mostly by linear footage, height, gate count, and demo of any old fence. Call (888) 419-3650 for an exact quote; estimates are free.
No, not for the scope we quoted. We give upfront pricing with a written line-item estimate, and if something buried turns up mid-job, we stop and talk to you before it becomes an invoice. Call (888) 419-3650 to schedule your free estimate.
The workmanship is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. If it’s not done right, we make it right. Call (888) 419-3650 with any warranty question.
Get a Free Chain Link Fence Estimate in Pleasant Hill
Call (888) 419-3650 to schedule a free on-site estimate for chain link fence work in Pleasant Hill. A live person answers, day or night. We’ll measure the run, talk through height, gauge, coating, and gates, check the property line and utility marks, and hand you a written line-item price. No pressure to book on the spot. If a gate approach or driveway is part of the job, ask about pairing it with Asphalt Driveways & Resurfacing in Pleasant Hill while we’re already on site.
Written by the team at Groundwork Construction Co. of Antioch.