Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Pleasant Hill, CA: What It Takes, What It Costs
Door installation in Pleasant Hill typically runs $450 to $1,900 for an interior door and $1,200 to $4,500 for an exterior entry or patio door, with most single doors finished in one to two days. The job means pulling the old slab or prehung unit, checking the opening for rot and square, shimming the new frame, hanging the door, and tuning the hardware so it latches clean. For an exact number on your opening, call (888) 419-3650 and we’ll set up a free on-site estimate.

How our door installation process actually runs, stage by stage
Door work looks simple until you’re twelve steps in and the rough opening is out of square by half an inch. Here’s the real sequence we follow, with the decisions that land on you and when.
1. Measure and confirm the opening (day 1, 45 to 90 minutes)
We measure the rough opening, check the header for sag, and look for rot at the sill and jamb. On Pleasant Hill’s older ranch stock this is where surprises show up: a door that’s been sticking for a decade is often a frame problem, not a door problem. You decide the door style, swing direction, and whether we’re keeping or replacing the existing trim.
2. Order and stage materials (3 to 10 days lead time)
Stock prehung doors arrive in a few days; a custom entry door or a matched mid-century slab can run four to six weeks. This is the wait you feel, so we lock the spec early. You sign off on the exact door, finish, and hardware before anything gets ordered.
3. Demo and prep (day 2, 2 to 4 hours per opening)
Out comes the old door and frame. We inspect the rough opening, replace any rotted framing or sill, and square and level the opening before the new unit goes in. If we find structural rot, we stop and quote it in writing before continuing. No silent change orders.
4. Set, shim, and seal (day 2, 2 to 3 hours)
The new door gets set, shimmed plumb, and fastened. Exterior doors get flashing and a proper seal at the threshold and jambs. This is the step where cheap work fails five years later, so it’s the one we don’t rush.
5. Hardware, trim, and final tune (day 3, 1 to 2 hours per door)
Hinges, lockset, deadbolt, closer, and casing go on. We test the swing, adjust the strike plate, and make sure the door latches with a light push. You walk it with us before we pack up.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The door options you’ll be choosing between
Most of the decisions on a door installation come down to material, exterior versus interior, and how much you care about matching the house. Here’s the honest trade-off on each.
- Solid wood: Beautiful, repairable, and the right call for a period entry. It also needs repainting every few years and moves with humidity. Suits a front door you plan to keep.
- Fiberglass exterior doors: Holds up to sun and rain with almost no maintenance and comes in wood-grain textures that read as real. The trade-off is cost, and a dent is harder to fix than a wood scuff.
- Steel exterior doors: Strong, secure, and the most affordable exterior option. It dents, and it can rust at the bottom edge if the threshold isn’t sealed right.
- MDF and hollow-core interior doors: Light on the wallet and fine for closets and low-traffic rooms. They don’t take a slam and they don’t deaden sound the way solid-core does.
- Solid-core interior doors: Quieter rooms, a heavier feel, and better for bedrooms and bathrooms. Costs more per door and needs sturdier hinges.
- Sliding and French patio doors: A big light upgrade for a back wall. You’ll pay more for the unit and the framing, and you need to plan the header and threshold carefully.
- Hardware and finish: A $40 knob and a $400 handleset both open a door, but only one feels right on a $3,000 entry. Match the finish to the rest of the house so it doesn’t look bolted on.
What door installation costs in Pleasant Hill, CA
Expect $450 to $1,900 for an interior door installed, and $1,200 to $4,500 for an exterior entry or patio door, depending on material and how much framing work the opening needs. Those ranges cover the door, labor, hardware, and cleanup. Here’s what actually moves the number.

| Line item | Typical range |
|---|---|
| Interior door, standard prehung | $450 – $1,100 |
| Interior door, solid-core or custom size | $900 – $1,900 |
| Exterior entry door, fiberglass or steel | $1,200 – $2,800 |
| Exterior entry door, solid wood with hardware | $2,000 – $4,500 |
| Sliding or French patio door | $2,200 – $5,500 |
| Framing or rot repair at the opening | $300 – $1,200 |
The variables that push a job to the low or high end: opening size and whether it’s a standard or oddball dimension; the condition of the existing framing and sill, which we can’t know until demo; the material grade of the door itself; whether we’re adding or moving a door in a wall, which means framing and possibly a header; and permit scope. A written estimate from us breaks out the door, labor, hardware, and any contingency line, so you see the parts. What it won’t include until we open the wall is hidden rot, which is why the demo inspection matters.
See the difference
Before
After
Before
After
Before
AfterWhat Pleasant Hill homes specifically do to this job
Pleasant Hill is a built-out post-WWII suburb, and that shapes every door installation here. The dominant housing stock is 1950s to 1970s single-story ranch and Eichler-adjacent tract homes, much of it now on its second or third round of doors. In those houses we regularly find original openings that were never quite square, thresholds that have soaked up decades of winter rain, and framing that’s settled against a slab-on-grade foundation. A door that’s stuck at the bottom is often a flat-lot or foundation issue before it’s a door issue. Because the city sits on the Concord fault and under the oak-covered ridges, exterior door openings on hillside lots often trigger seismic and fire-resistant detailing as part of a larger remodel. This is a small-city permitting culture, and door replacements that change the size of an opening or count as a new opening usually need a permit and inspection. Front-door swaps that match an existing opening are often simpler, but we confirm the scope before work starts. If the door is part of a bigger project, you’ll also see scope overlap with our Windows & Doors in Pleasant Hill work.
Serving Pleasant Hill, CA – Our Local Coverage Area
We serve Pleasant Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked questions about door installation in Pleasant Hill
A single interior door is usually a one-day job, and an exterior entry door is one to two days once materials are on site. Custom entry doors add three to six weeks of lead time, so the scheduling feels longer than the install. Call (888) 419-3650 for a firm timeline on your door.
Usually not for a straight swap into the same opening, but yes if you’re cutting a new opening, resizing one, or changing an exterior wall. Small-city code review here is specific about structural and seismic changes. We tell you up front which category your job falls in and handle the permit when one is needed.
Most of the time, yes. A standard swap into an existing opening touches none of that. Adding a door in a solid wall means framing and possibly a header, which is real work and worth planning. We quote that difference clearly before we start.
Interior doors run $450 to $1,900 installed, and exterior entry or patio doors run $1,200 to $4,500. The final number depends on door material, hardware, and any framing or rot repair the opening needs. Call (888) 419-3650 for an exact quote; estimates are free.
Every door we install is covered by our 730-Day Done Right Promise. If the install isn’t done right, we make it right. That’s in writing, and it’s one of the longest workmanship guarantees in the residential space. Some jobs also pair well with exterior work on the same visit, like a Vinyl Fence in Pleasant Hill for the back yard.
Ready for a free door installation estimate in Pleasant Hill?
Call (888) 419-3650 to schedule a free on-site estimate for your door installation in Pleasant Hill. A live person answers around the clock, so you’re never stuck in voicemail. We’ll walk the opening with you, talk through material and hardware options, and hand you an upfront written quote the number you see is the number you pay. Estimates are free, financing is available, and projects over $10,000 get $1,000 off. If your door is part of a wider scope, start with our Windows & Doors service or see how we cover Pleasant Hill. Fence work on the same property is easy to arrange, including a Chain Link Fence in Pleasant Hill.
Written by the team at Groundwork Construction Co.