Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vinyl Fence in Alamo, CA: What You’re Actually Getting and What It Costs
Vinyl fence installation in Alamo runs $3,500 – $9,000 for most residential lots, with the typical job landing near $5,800. A standard 150-foot privacy run takes two to three working days once materials are on site, and the fence itself never needs painting, staining or sealing. Call (888) 419-3650 for a free on-site measure and a written line-item quote.

What a Vinyl Fence Build Looks Like, Day by Day
We work in five stages, and you’ll know what’s happening at each one before we start.
- Stage 1 – Site walk and layout (same visit as the estimate): We measure the run, confirm property lines from your plat or survey, and note anything underground: irrigation lines, private well runs, septic leach fields, conduit. On Alamo’s multi-acre parcels this step can take longer than the install itself. You decide the fence height and where gates land.
- Stage 2 – Material order and HOA or county review (five to twelve business days): Standard PVC panels are usually in stock; architectural-grade or textured cedar-look panels run longer. If your property sits under an HOA architectural review, this is when the submittal goes in. You approve the final panel style and color before anything ships.
- Stage 3 – Setting posts (day one): We lay out the line, auger each hole to depth, pour concrete footings, and set galvanized steel posts inside the vinyl sleeve. Posts cure overnight. Nothing else happens that day because a post that shifts takes the whole fence with it.
- Stage 4 – Panels, rails and gates (day two): Posts get checked for plumb, then rails, pickets and caps go on. Gate hardware is hung and adjusted here. This is the longest day and the one you’ll want to be around for so you can flag anything that looks off.
- Stage 5 – Final walk and cleanup (day three, usually half a day): We re-torque hardware, cut back disturbed soil, haul off offcuts, and walk the fence with you. You sign off, and the 730-Day Done Right Promise attaches to the whole install.
Alamo’s long private driveways and slope changes add real time to stages three and four. A flat quarter-acre in a tract subdivision might finish in two days; a hillside run across fifty feet of grade change won’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Vinyl Fence Options You’ll Choose Between
Vinyl isn’t one product. The panels you pick drive both the price and how the fence looks in ten years.
- Standard privacy panel (6 ft, hollow picket): The value option, roughly $22 – $30 per linear foot installed. Solid privacy, sharp look, but hollow pickets crack if a ball or a branch hits them square in cold weather.
- Architectural-grade privacy panel: Heavier wall thickness, reinforced rails, and a tongue-and-groove profile that blocks wind from passing through. Costs $30 – $45 per linear foot and is the right call for Alamo’s Diablo-wind exposure.
- Cedar-look textured vinyl: Faux wood grain molded into the panel. Expect $38 – $55 per linear foot. The closest thing to a wood fence you can install without repainting every few years.
- Post style: Galvanized steel posts inside vinyl sleeves hold up far better on clay soils than wood posts wrapped in vinyl; the upgrade runs a few hundred dollars over the whole run and is worth it on any fence over 100 feet.
- Color: White, tan, and gray are standard stock. Custom colors add two to four weeks. If your HOA specifies a color, confirm it before ordering.
- Gates: Standard single and double vinyl gates are included at the quote stage. A wider drive gate with heavier hardware is a separate line item.
What Vinyl Fence Costs in Alamo, CA
The number you’re likely to land on is between $3,500 and $9,000, and most homeowners who call us fall somewhere in the middle of that band.
| Line item | Typical range |
|---|---|
| Vinyl fence install, 100-150 linear ft | $3,500 – $6,500 |
| Vinyl fence, 150-250 linear ft | $5,500 – $9,000 |
| Per linear foot, standard privacy panel | $22 – $30 |
| Per linear foot, architectural-grade panel | $30 – $45 |
| Gate (single walk) | $200 – $500 |
| Removal of existing fence | $300 – $900 |
Four things push a job toward the high end. Run length is the biggest. Grade change is second: a hillside run needs stepped panels and longer posts, which adds both labor and material. Property line disputes or a missing corner pin can hold up the whole job until a survey is done. And HOA or county review slows the schedule even when it doesn’t add cost. What’s in our written estimate: materials, labor, concrete, post-setting, gate hardware, removal of the old fence, and cleanup. What typically isn’t: a boundary survey if one is required, landscaping restoration beyond basic soil grading, and any repair to underground irrigation the fence crosses.
See the difference
Before
After
Before
After
Before
AfterWhat Alamo Lots Do to a Vinyl Fence Job
Alamo is unincorporated, so fence permits go through Contra Costa County rather than a city building department, and the county’s property line and setback rules apply across the whole 94507 ZIP code. The bigger wrinkle is what sits under the ground. On the multi-acre estate parcels along Stone Valley Road and off the valley roads, we routinely hit private well runs, septic fields, and irrigation trunks within feet of where a fence is supposed to go. A Danville tract lot doesn’t have that problem. Add the valley’s clay-heavy soils, which shift through wet winters and dry summers, and a post that’s set twelve inches deep on flat ground needs to be set deeper and wider here. Design the fence to flex a little with that movement and it will hold plumb for years instead of leaning by the third season. The other thing we see on Alamo’s older outbuildings and pool areas: existing posts rotted at grade because the original installer never sleeved them. That’s usually why a call comes in.

If the project is part of a full Fence Installation in Alamo plan covering multiple fence lines, we scope it as one job. Homeowners often pair this with Driveway Repair & Replacement in Alamo when access is being regraded at the same time, and occasionally with Asphalt Driveways & Resurfacing in Alamo when the fence line crosses a driveway apron. Our Fence Installation service covers the wider menu, and you can see what else we handle across Alamo.
Serving Alamo, CA – Our Local Coverage Area
We serve Alamo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vinyl Fence in Alamo
Two to three working days on site for a standard 150-foot run, plus five to twelve business days for material delivery and any HOA review. Hillside lots with significant grade change stretch the install by a day. Call (888) 419-3650 and we’ll give you a firmer schedule after the site walk.
Because Alamo is unincorporated Contra Costa County, fence permits go through the county, and the rules depend on height, setback from the property line, and whether the fence sits on a slope or near a drainage easement. We pull what’s required and confirm the setback before we order panels. Call (888) 419-3650 to talk through your specific lot.
Yes, if it’s spec’d right. Standard hollow panels rattle and eventually crack under Diablo-wind gusts, so on exposed Alamo lots we recommend architectural-grade panels with reinforced rails and steel posts set inside the vinyl sleeve. The material upgrade adds roughly $8 – $15 per linear foot and is the difference between a fence that lasts twenty years and one that needs repair in five.
Most of the time, yes. We locate irrigation and conduit before digging and hand-dig around anything we can’t move. If a sprinkler line is directly in the fence line, we’ll flag it before we start so you can decide whether to reroute it. Call (888) 419-3650 and we’ll walk the line with you during the estimate.
Every vinyl fence we install is backed by the 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship, post setting, and gate hardware. The panel manufacturer’s own warranty on the vinyl material runs alongside it. Call (888) 419-3650 for the written details before you sign anything.
Get a Free Vinyl Fence Estimate in Alamo
Call (888) 419-3650 and a live person picks up, any hour. We’ll set a time to walk your property, measure the run, flag anything underground, and hand you a written line-item quote with the full price on it. No change orders later, no vague numbers. Estimates are free, and you’ll know your total before we order a single panel.
Written by the team at Groundwork Construction Co.