A Groundwork company - serving Antioch, CA
Chain Link Fence in Danville, CA | Groundwork Construction Co. of Antioch

Chain Link Fence in Danville - Free Quote, Property Line & Permit Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

(888) 419-3650

Chain Link Fence in Danville: What You’re Actually Looking At

A chain link fence in Danville typically runs $3,500 – $9,000 for a standard residential lot, and most installs finish in two to four days once materials land. The number swings on height, footage, gauge, and whether the run sits on a slope. For a property line on a Danville hillside lot, you should know by day two whether the grade forces custom post work. Call (888) 419-3650 and we’ll price it from your actual boundary, not a square-foot guess.

professional fence installation service in Danville, CA

Call (888) 419-3650

How a Chain Link Fence Goes In: The Real Day-by-Day Sequence

Chain link is a fast job compared to wood or masonry, but the prep is where the fence either holds for twenty years or starts sagging by year three. Here’s how we sequence it on a Danville property.

Day 1: Site walk and layout

We walk the boundary with you and confirm the run. This is where you lock in corner posts, gate location, and gate swing. If your parcel has a survey marker, we use it. If you don’t have one and the setback is tight against a neighbor’s lot, that’s your call to make before we set a single post. Terminals and corners go where design says, not where convenience says.

Day 1 – 2: Digging, setting, and the concrete cure

Posts get dug and set in concrete. This part runs one to two days depending on footage and how much rock the soil gives you. Danville’s clay-heavy soils are a known variable; they hold moisture in winter and shrink in dry months, which is exactly why we set posts deep rather than shallow and fast. Concrete needs to cure before tension. That’s a real wait, not a skipped step, and any installer who tells you otherwise is cutting the one part of the job that keeps the fence vertical.

Day 2 – 3: Rails, tension wire, and fabric

Top rail goes up, tension wire or bottom rail goes on depending on what you chose, and the fabric gets pulled. Pulling tension correctly is the whole trick: too loose and the fence oils and sags, too tight and you stress the posts. Background-checked, uniformed technicians handle this stage. You don’t need to be home for it.

Day 3 – 4: Gates, ties, and the top finish

Gates get hung, hardware set, fabric tied at even intervals, and the top edge finished (knuckle or twisted, depending on your spec). You walk it with us. Any post that’s out of line or any gate that doesn’t swing clean gets fixed before we call the job done, and the work is covered by our 730-Day Done Right Promise.

Closeout: cleanup, and where the wider project fits

We haul off excess soil, clean up the property, and leave the run ready for whatever comes next. If the chain link is one piece of a bigger exterior plan, it’s worth reading our Fence Installation in Danville page for the full-scope view before you lock the boundary in.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Options You’ll Actually Choose Between on a Chain Link Fence

Chain link sounds like one product. It isn’t. Most of the decisions below will move your price more than footage will, so here’s the honest trade-off on each.

  • Gauge of wire: 11.5-gauge is the residential standard and holds up fine. 9-gauge costs more and takes a hit from a deer or a ball without denting. If the fence borders a school, park, or busy street, spend on the heavier wire.
  • Height: 4 feet is the cheapest and most common for a backyard. 5 and 6 foot jump in cost because posts and rails get beefier. In Blackhawk and other Danville neighborhoods with HOA design rules, height is often capped, so check before you commit.
  • Coating: Galvanized is the baseline and rusts slowly in dry heat. Vinyl-coated (usually green or black) costs 15 – 25% more and reads more like a yard fence than a utility line. In Danville’s intense summer sun, the coating also protects the wire from UV fatigue.
  • Top finish: Knuckle-top is safer for pets and kids. Twisted/barbed top is a security spec. Pick based on who uses the yard.
  • Gates: A single walk gate is standard. A double drive gate adds a few hundred dollars but means you can pull a trailer or RV through without moving a panel.
  • Bottom treatment: Tension wire keeps the fabric tight to the ground and stops dogs from pushing under. A bottom rail costs more but holds up better against a slope.

On the finish side, if you want hardware that’s actually rated for outdoor exposure, we spec brands we trust and won’t swap in whatever the supply house has on the shelf. That same discipline applies across our trades, whether it’s Toto and Grohe fixtures in a bathroom or the fence hardware on your property line.

What Chain Link Fence Costs in Danville, CA

The lead range for a residential chain link fence in Danville is $3,500 – $9,000. Most single-family lots land in the middle of that. Here’s what moves the number up or down.

Worker installing a metal fence post with wet concrete and level. in Danville, CA
Line Item Typical Range
Standard 4′ galvanized, flat lot, under 150 lf $3,500 – $4,800
5′ – 6′ height, vinyl-coated, 150 – 250 lf $5,500 – $7,500
Sloped or rocky terrain, custom post work Adds $600 – $1,500
Double drive gate with hardware Adds $500 – $1,200
Removal and haul-off of existing fence Adds $400 – $900

What moves it to the low end: a flat, rectangular lot on good soil, a standard 4-foot run, and no demo. What pushes it high: steep terrain (very common on the 94506 hillside side), heavy rock excavation, tall security spec, or a run that needs multiple gates and corners. A fenced boundary line that’s never been surveyed can also add cost if we have to re-set the line before posts go in.

What’s in a written estimate: materials, labor, post setting and concrete, gates, hardware, cleanup, and permit pull where required. What’s not: survey work if the boundary isn’t marked, unexpected rock excavation, and any landscaping restoration. We line-item each of these up front, so there’s no surprise invoice when the excavator hits something. No-hassle upfront pricing, the number you see is the number you pay.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Danville Homes Specifically Do to a Chain Link Fence Job

Danville is a built-out Tri-Valley suburb, which means almost every fence job here is a remodel, replacement, or add-on to an existing lot, not new subdivision construction. That changes the job. On the flat 94526 core, most lots have an existing fence, a surveyed boundary, and mature landscaping that has to be worked around. On the hillside 94506 side toward Blackhawk and Tassajara, the grade is the whole story: posts need to be set deeper, panels have to step down the slope, and in the western WUI fire-zone areas, the fence line sometimes gets caught up in defensible-space and access discussions that affect where it can sit. We see plenty of old rusted runs on 1960s-to-1990s ranch lots where galvanized wire has slowly given up, and hillside installs where a previous owner set posts too shallow and the fence is leaning by year four. If your fence is going up alongside a new pad or walkway, homeowners often pair this with a fresh hardscape, so look at our Concrete Driveways & Concrete Work in Danville page and our Asphalt Driveways & Resurfacing in Danville page if the project is growing.

Serving Danville, CA – Our Local Coverage Area

We serve Danville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked – Chain Link Fence in Danville

Get a Free On-Site Estimate for Your Chain Link Fence in Danville

Call (888) 419-3650 to schedule a free on-site estimate for chain link fence in Danville. A live person answers, day or night. We’ll walk the boundary, confirm the run and gates, and hand you a written line-item price with no pressure to sign on the spot. That’s how our fence installation work gets priced across Danville, and it’s the same standard every job gets from the team at Groundwork Construction Co.

Written by the team at Groundwork Construction Co.

Why Danville Chooses Groundwork Construction Co. of Antioch

We set the standard for chain link fence in Danville.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Danville

Getting your chain link fence project started is simple.

1

Call or Request a Free Estimate

Tell us about your chain link fence project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chain link fence pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Danville Customers Say

Trusted by homeowners across Danville and surrounding areas.

★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan

Ready for Chain Link Fence in Danville?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Danville.

(888) 419-3650

Request a Free Estimate in Danville

Tell us about your chain link fence needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - 24/7 Dispatch