Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Alamo, CA: What the Job Really Involves
Cabinet and countertop work in Alamo typically runs $14,000 to $45,000 for a full tear-out and replacement, with most projects finished in two to four weeks from demo to final caulk. The sequence is rigid: template the counters only after the boxes are set and shimmed dead level, because a 1/8-inch sag in a cabinet run telegraphs straight through a slab. Call (888) 419-3650 and we’ll walk your kitchen, check the walls for plumb, and put a line-item number in writing.

How We Run a Cabinet and Countertop Job, Stage by Stage
Most contractors talk about “the install.” The install is three days. The other eleven are what decide whether your drawers close flush in year five.
Stage 1: Site check and field measure (day 1, about 2 hours)
We pull baseboards, check the walls with a 6-foot level, and measure the room at three heights because Alamo’s custom-era homes rarely have square corners. You sign off on the layout and the appliance schedule here. If the fridge opening is 35 inches and your new unit needs 36, this is the day we find out, not delivery day.
Stage 2: Demo and rough prep (2 to 3 days)
Old cabinets and counters come out, and we cap the water and gas lines at the shutoffs. Subfloor gets checked for soft spots and any old water damage. If you’re moving a sink or range, this is when the rough plumbing and electrical happen, and when the county inspector visits if the scope triggered a permit.
Stage 3: Cabinet set (2 to 4 days)
Boxes get set, shimmed, and screwed to studs, then level-checked across the whole run before any filler or crown goes on. You confirm drawer and door swing direction on day one of this stage, because changing it later means new fronts.
Stage 4: Template and fabrication (5 to 10 days of waiting)
Stone and quartz fabricators template only after the cabinet set is finished and the sink cabinet is in. This is the quiet stretch where the kitchen sits empty. We schedule the plumber and electrician’s final connections against the counter date so nobody is idle.
Stage 5: Counter install, sink set, trim-out (1 to 2 days)
Slabs go in, the undermount sink gets set and sealed, faucets connect, and cabinet crown, toe kick, and hardware finish the run. We do a final walkthrough with you, opening every drawer and door.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Every decision below changes both your budget and how the kitchen feels in ten years. Here’s the honest version of each.
- Stock vs. semi-custom vs. full custom cabinets: Stock boxes are the cheapest and fastest but come in fixed sizes, so fillers eat your layout. Semi-custom (KraftMaid is the name most of our Alamo clients land on) gives you adjusted widths and a real finish palette at a mid-range price. Full custom fits an odd estate kitchen perfectly and costs accordingly.
- Quartz vs. natural stone: Quartz is non-porous and forgiving, which matters in a kitchen that sees real cooking. Granite and marble hold up but need sealing and stain discipline. Cambria sits comfortably in the engineered camp for clients who want a consistent slab pattern.
- Slab thickness and edge profile: A 3cm slab with a simple eased edge keeps cost down. A mitered 2-inch edge reads high-end and adds fabrication time.
- Door style and finish: Painted shaker and flat-slab doors are the two most common directions. Painted finishes chip at the corners over time; stained wood hides wear better.
- Drawer hardware and soft-close: Undermount soft-close slides are worth the upcharge. Cheap side-mount slides are the first thing to fail.
- Sink and faucet: An undermount workstation sink pairs well with quartz. A farmhouse apron front costs more in cabinet modification and counter cutout.
What Cabinets & Countertops Cost in Alamo, CA
A full cabinet and countertop replacement in Alamo lands between $14,000 and $45,000. Here’s how that breaks down on a written estimate.
| Line item | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Backsplash installation | $800 – $2,500 |
Five things push a job to the top of that range: the size and layout of the kitchen, whether the walls are square (estate-era homes often aren’t), moving plumbing or a gas line, the material grade you choose for counters and doors, and whether the scope requires a county permit and inspection. A straight swap in a kitchen with good walls and no relocation sits near the bottom. A reconfigured island with a new sink location and custom cabinetry climbs fast.

A written estimate covers cabinet boxes and fronts, counter fabrication and install, sink and faucet set, hardware, and disposal of the old units. It typically excludes appliance purchase, backsplash tile if it wasn’t in the original scope, and any drywall or electrical repair discovered after demo. Those get quoted separately before we touch them, and the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Alamo Homes Specifically Do to This Job
Alamo is unincorporated, which means your project runs through Contra Costa County’s building department rather than a city hall, and that shapes the schedule. On a cabinet job that stays put, no permit is usually needed. The moment you move a sink, a gas range, or a wall, you’re in county review, and hillside lots off roads like Stone Valley Road can pull in geotechnical review that a flat-lot project in Danville never sees.
The housing stock matters just as much. Most of what we work on here is custom ranch and Mediterranean-style estates built from the 1950s through the 2000s on half-acre to several-acre parcels. Those kitchens were often built in place, so walls are out of plumb and cabinet runs are longer than a tract kitchen. We field-check every run before ordering. The San Ramon Valley’s hot, dry summers mean kitchen finishes near west-facing glass fade faster, and the older custom homes often hide a previous remodel’s shortcuts behind the drywall. We find those before the new cabinets go in, not after.
If the cabinet swap is part of a larger Kitchen Remodeling in Alamo project, we sequence the trades so the room isn’t torn up twice. Homeowners in Alamo often pair this work with a laundry or bath refresh at the same time, so it’s worth asking about Walk-In Showers & Shower Remodeling in Alamo or a Tub-to-Shower Conversion in Alamo while the trades are already on site. For the broader scope, our Kitchen Remodeling service covers design, layout, and the full build.
Serving Alamo, CA – Our Local Coverage Area
We serve Alamo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Alamo
Most take two to four weeks from demo to final walkthrough. The bulk of that is cabinet set and counter fabrication. Call (888) 419-3650 for a schedule specific to your kitchen.
A straight replacement that keeps the sink, gas range, and walls where they are typically doesn’t require a permit. Moving plumbing, gas, or a wall triggers Contra Costa County review. We tell you up front which side of that line your project falls on.
Yes, and most Alamo jobs stay that way. A swap-in-place is faster, cheaper, and cleaner. If the layout doesn’t work for you, we’ll quote the relocation as a separate line so you can see the real cost of moving it before you commit.
Budget $14,000 to $45,000 for a full replacement, with cabinet installation alone at $4,000 – $13,000 and countertop installation at $2,000 – $6,500. Call (888) 419-3650 for an exact quote on your kitchen. Estimates are free.
Every cabinet and countertop job is covered by our 730-Day Done Right Promise. If something isn’t right, we make it right. Material warranties from the brands we install come on top of that.
Get a Free Cabinet and Countertop Estimate in Alamo
Call (888) 419-3650 and a live person answers, day or night. We’ll schedule a free on-site visit, take field measurements, and hand you a written line-item estimate with the cabinet and counter choices laid out side by side. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off. One call, one number, no surprises.
Written by the team at Groundwork Construction Co. of Antioch.